Question about 2003 Nissan Maxima

1 Answer

Car Stalls at low speed. Restarts. DTC Code 0340 and 1167

2003 Nissan Maxima with 100,000 miles. DTC code for Oxygen sensor has been on for a few months- HO2S2-2. Service provider said it was not critical to replace and it passes inspection, so...
Recently started to stall when at low speed (under 30mph) or at idle. Will restart ofter a few attempts. I have noticed that it will try this while running at high speed on the interstate. It hiccups but does not die. Otherwise it runs great. Does not idle rough, smooth acclerations, easy gear change (automatic).

I have tried fuel system cleaner and even replaced fuel filter. No real change in performance.

Codes pulled at Autozone are: BBHO2S22 maximum voltage not met, and BBCatalyst system efficiency below threshold- bank 2. The DTC code I got from the blinking light are 0340 and 1167.

Would replacing sensors keep it from stalling?


Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

The codes you provided indicate separate issues. Code 1167 is indicative of either a stuck fuel injector of the O2 sensors. Code 0340 indicates the CMP position sensor. Replacing the O2 sensors will likely clear the 1167 code assuming the fuel injectors are okay. It would be the first course of action. If there's no noticeable change in performance (i.e. stalling problem continues) then the CMP position sensor is likely your overall problem. Best of luck.
Greg

Posted on May 25, 2009

  • steve dj Aug 11, 2012

    please read my request again. Code is 430, not340, and have no 1167 code

  • steve dj Aug 11, 2012

    woops , sorry I replied to wrong message

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have 01 nissan maxima and it has p132 code and cutoff but will crank back what is the problem


P0132 Nissan - Engine-Codes.com

engine-codes.com/p0132_nissan.html
P0132 Nissan O2 Sensor Circuit High Bank 1 Sensor 1. ... 2002 Nissan Sentra andAltima Factory Service Bulletin OBDII Code P0132 · What does this mean?

P1320 Primary Ignition Signal Fault Testing and ... - YouTube

? 12:27
www.youtube.com/watch?v=kpFzunNeAaY
Aug 15, 2014 - Uploaded by CarsNToys This was performed on a 1997 Nissan Maxima. ... Code P1320 is indicated when ignition signal in the primary circuit (of the ... $1000 and could not find the problem out with my 2001 maxima.but now at ..... 2016 Nissan Maxima SL - Ultimate In-Depth Look - Duration: 43:16. by MikesCarInfo 261,066 views.

Sep 16, 2015 | Nissan Cars & Trucks

1 Answer

2000 Nissan mis firing,, code reader shows codes: 0430; 0305; and 1320. Assuming its bank 2 cat convertor. Is this where i should start???


430 is Oxygen sensor

0305 is misfire on cylinder 5

1320 is ignition coil.

The ignition coil is causing the misfire. That is causing rich mixture which could case the oxygen sensor issue. You need to work from the ignition issue to the sensor. The reason is if you replace the cat and the engine is running rich it will heat the cat up to the point that the car might catch fire. Oxygen sensors are also prone to fail after about 60 thousand miles.

Oct 02, 2014 | 2000 Nissan Maxima

1 Answer

Why is my car messing up


Obviously its problem with your fuel to air mixture. It is building up unburnt fuel due to not enough oxygen. This lack of enough oxygen will cause the stalls and the build up of gas will cause the backfires. Heat affects the mixture ratio. A number of detector are involved in the exhaust system and any one of them could be failing. Throttle Position Sensors, MAP sensor, Oxygen sensors, catalytic converter, etc. You should be getting the check engine light coming on also. Any auto parts place can read you the code numbers for free. They will provide more specific information about failing parts.

Aug 13, 2014 | 2010 Nissan Maxima

1 Answer

Nissan maxima code P0325,P0100 and P0110


Well, sometimes you get lucky replacing parts, but usually its something other than the component in question.
The trouble codes are a guide as to what to test, not what to replace.
Code 325 is for the knock sensor which could be a phantom code.
Code 100 is for a bad signal from the MAF sensor which may or may not be caused by a bad sensor. It could be a vac leak too.
Code 110 is for a bad signal from the intake air temp sensor. The signal tells the computer what the temp of incoming air is to help the computer decide how rich the fuel mixture should be.
You need to get the testing procedures for each code and follow them. I would skip code 325 and start with code 110.
The fuel pump was probably a waste of money unless you checked fuel pressure before you replaced it and it was low. Same thing with the O2 sensors. Very rare if both sensors fail at the same time.

Feb 28, 2013 | 1996 Nissan Maxima

1 Answer

I have a 1998 Nissan Maxima GLE, I Failed the Emission Inspection (DTC) Diagnostic Trouble Codes of "P1492","P1105" What these Codes exactly? mean


A code P0300 may mean that one or more of the following has happened:
  • Faulty spark plugs or wires
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector(s)
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Stuck/blocked EGR valve / passages
  • Faulty camshaft position sensor
  • Defective compute
  • P1105MAP/BARO Pressure Switch Solenoid Valve
  • Check and clean the MAP sensor, or replace.
  • P1492EVAP Canister Purge Control/Solenoid Valve (Circuit)
  • Replacing the purge solenoid will clear code P1492 This should also clear code P0300 as well.

Oct 16, 2012 | 1998 Nissan Maxima

1 Answer

If i am getting the codes P0037 P 0057 for the 04 nissan maxima is that the front or rear oxygen sensor ?


Hi there:
DTC P0037 - Bank 1 Oxygen Sensor Heater Circuit Low

DTC P0057 - Bank 2 Oxygen Sensor Heater Circuit Low


Cause could be harnesses connections, wiring, HO2S heater itself or ECM issue. Diagram location in THIS LINK.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.


Aug 16, 2012 | 2004 Nissan Maxima

1 Answer

A few months back my daughter took her 2000 nissan maxima in and had it scan with a obd11 and she was told it was a o2 sensor, she did nothing ,so i took it in today and it reads po300 code.[misfire...


It shoudn't be. Your oxygen sensors detect the oxygen in the engine. A misfire can be a few things, such as spark plugs/coils, wires, distributor cap and rotor, cam sensor, crank sensor, ecm. I would start with a tune up. If it has been more then 75,000 miles since you changed the plugs and wires, it could be that. Has it been acting up, such as hesitations, stalling when you slow down or stop?

Feb 11, 2011 | 2000 Nissan Maxima

2 Answers

Nissan Maxima 1997 250,000 kms


could be the oxygen sensor manybe, or fuel pump

Sep 03, 2009 | 1997 Nissan Maxima

2 Answers

1992 SE maxima jerking, sputtering, stalling


I had a similar problem and resolved it by replacing the mass airflow sensor. Ive got 235k+ miles on my 1992 Maxima SE.
Still runs good but having problems with the alarm system.

Jan 27, 2009 | 1992 Nissan Maxima

Not finding what you are looking for?
2003 Nissan Maxima Logo

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...