Question about 2001 BMW 3 Series

2 Answers

How to remove wheel on 2001 bmw 325i

I can't change flate wheel. Please help removing wheel from my 2001 bmw 325i car.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 33 Answers

In the boot you'll find underneath the carpet, a spare wheel well. Containing a spare wheel, a jack, lever tool to remove the bolts and thats all you need. Make sure the handbrake is on and in gear to stop the car moving. Using the jack, you'll notice rubber jacking blocks on th underside of your car.
These points are where to jack the car up. Jack the car up so the its slightly lifted but the wheel is still touching the floor, this will make it easier to undo the wheel nuts. Best way is to put the wheel bolt removal tool and kick it down to "crack them off". Once all bolts loosened continue to jack car up till the wheel is clear off the ground. Remove all loosened bolts and replace wheel. Job done!

Posted on May 27, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Before you can think of how to remove the wheels, you need to take consideration of your car wheels as well as their compatibility with the car you are dealing with. Following lots of information regarding the issue, I would refer you to the following site: http://4wheelonline.com/KMC_Wheels.136045

Posted on Nov 05, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I CHANGE THE STARTER FOR BMW 325I 2001


remove the intake manifold to gain access to it, it's on the driver side.

Sep 23, 2014 | 2001 BMW 325

2 Answers

How do you change the time on the clock in a 2001 BMW 325i. The manual does not say and my clock is running 8 minutes behind.


there is a button located on the end of the turn signal that controls the clock function on the dash and the radio clock.

Jan 28, 2011 | 2001 BMW 325

2 Answers

2001 bmw fuel pump replacement


remove rear seat, it's just clipped in. remove fuel pump acces cover gasket, pull out fuel pump assembly. Hold off smoking till later. order online new pump for a third of the price. reinstall. bingo...done.

Jun 13, 2010 | 2001 BMW 325

1 Answer

Where is the wheel brace on a 1991 325i bmw


Hi, I had an E30 325i and the jack and wheel brace were behind the boot panel opposite the battery.

Oct 13, 2009 | 2001 BMW 3 Series

4 Answers

2001 BMW 325i problem: Car runs very rough, but no warning lights


Sounds like a fuel problem , have you changed the fuel filter in a while ? could be the knock sensor or the knock sensor module needs to be replaced.

Jul 28, 2009 | 2001 BMW 325

1 Answer

How do I remove the cover on a 2002 325i BMW tail light wiring? thanks


Do you need to change a bulb or are you changing to custom lamps. If it is bulb replacement open trunk/boot (depending where you live ) the access for the tail lamps is at the rear corners of the trunk, If you are changing lamp lenses or assembly remove the screws( same location ) at lamp corners

Jul 09, 2009 | 2001 BMW 325

1 Answer

2001 bmw 325i changing spark plugs


it doesant sound like its a problem from your spark plugs sounds more like a stepper motor problem make sure you have fitted everthing correctly after you have changed spark plugs sensors ect if you needed to remove elctrical sensors

Jun 09, 2009 | 2001 BMW 3 Series

1 Answer

2002 BMW 325I BLOWER REPLACMENT


The motor is replaced from under the hood, you have to remove the cabin ai filter housing. It is can be a hard job. Most dealerships will charge 3 hours labor to do it.

Apr 10, 2009 | 2001 BMW 325

1 Answer

Left caliper locking up


Jack it up and remove the wheel. Push the brake and release it. The calipers should release. If they don't, open the bleeder. If the caliper releases as soon as you open the bleeder, replace the brake hose. If the caliper doesn't release when you open the bleeder, replace the caliper.

Apr 06, 2009 | 2001 BMW 325

1 Answer

How to replace rear shocks on 2003 bmw 325i


You have to take the trunk liners off of both sides. There will be 3 13mm nuts on each side for the shocks, and under the car is a 16 or 17mm bolt that has to be removed. I hope this helps.

Mar 31, 2009 | 2001 BMW 325

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

540 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...