Question about 2006 Honda Civic Hybrid

1 Answer

Need help to change quarter panel on 06 civic

I bought a wrecked car that I want to fix up can you give me details on how to change the quarter panel

Posted by on

  • Richard Scordino May 11, 2010

    note of caution...before investing money on sheetmetal on the outside, be really sure that the chassis is straight, otherwise you will have a nice looking car that does not go straight when you try and drive it. not a body guy, but usually unless entire quarter is completely stoved in, you can cut and section the damaged part. many companies offer partial pannels for that. (involves cutting, welding or riveting and some good bondo work.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

The 1/4's are spot welded and replacement requires drilling out spot welds, being able to mig weld in new panels, grind, fill, prime, color match, paint, etc. There is a reason body shops get thousands of dollars for this work.

If you need to ask, it may beyond your capabilities.

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive got a towed in right rear wheel on a 04 pt cruiser rear quarto wreck where more than likley should i start looking to get this wheel straight axle spindle watts link or complete rear end change


Unibody should be checked @ a body shop that has measuring system to check length, width, height. If thats good replace rear suspension then get vehicle aligned. It will be safe and won't wear out your tires prematurely.

May 12, 2015 | 2004 Chrysler PT Cruiser

1 Answer

06 honda civic lx window problem


this is covered in the FSM, buyone
or look at alldata.com under windows.
that's funny you need windows to see and fix windows in car, LOL

Jun 16, 2013 | 2006 Honda Civic Hybrid

2 Answers

2001 honda civic ex starts dies no power


i had the same problem with my ek civic it turned out to be the crank angle/position sensor so i would replace it and try starting it then it should run

Jun 26, 2012 | 2001 Honda Civic

1 Answer

Front seat belts dont retact


Unfortunately there is no quick fix. The coil springs are worn out and need to be replaced. you can get them at just about any auto parts supplier. Another good place to look is your local wrecking yard. Good luck! Please rate the solution if I was helpful. Thank you!

Mar 30, 2011 | 2002 Honda Civic

1 Answer

I have a convertible 06 mustang and I get water in the quarter panel an it sloshes around, how do I drain?


try drilling a small hole in the inside bottom of quarter panel and it should drain out

Mar 28, 2011 | Ford Mustang Cars & Trucks

1 Answer

How do you fix a tranny panel leak on 06 mazda 3 and what would you need


Hi,

There are some points were the fluid leaks would be generated,

The main drive oil seal, axle oil seal, and the transmission oil pan gasket.

Please give us the details of what part is the fluid leakage.

Dec 07, 2010 | 2006 Mazda 3

2 Answers

1990 honda civic automatic seat belts will not move and warning chime will not stop


any automatic (ELECTRIC SLIDING) seatbelts in a honda car have a LIFETIME WARRANTY thru ANY HONDA DEALER (free of charge). just give them a call and ask about setting an appointment to take your car in for service.

Oct 15, 2009 | 1990 Honda Civic

1 Answer

1999 civic won't turn over clicking noise under dash.


Likely needs a starter. But don't buy a new one. Go to a local remanufacture shop they may be able to fix the old one cheaply or failing that go to a wrecking yard and get a used one for cheap. Just do not go to a honda dealer they will charge you big bucks.

Jun 16, 2009 | 1999 Honda Civic

1 Answer

Rear bumper not fitted properly on 2005 honda civic gli


hi all cars that come from the factory are quality controled so it would not be allowed out in such a shoddy condition get someone who knows what they are doing because if its in the fixing locations correctly then your panel work is out proberly due to the impact take it back best of luck yates210456

Oct 18, 2008 | 2005 Honda Civic

Not finding what you are looking for?
2006 Honda Civic Hybrid Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...