Question about 1998 Buick LeSabre

1 Answer

How do I remove the front door panel to replace the mirror

How do I remove the front door panel to replace diverside mirror on 1998 Buick Lesabre

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 316 Answers

Normal 0 Disconnect your negative battery cable. Locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Remove the interior door handles, then disconnect the wire clips to the switches. Your panel is held in place by snap in clips; use a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.

If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger side front fender removal


study the new fender and where there is a bolt hole then that is where you will find the bolts to remove on the old fender . They will normally be along the top inside , at the bottom near the door and around the bumper and up the panel that the door hinges are attached to

Jul 20, 2014 | 1998 Buick LeSabre

1 Answer

How do you install the door mirrors on 1997 buick lesabre


Most times you can remove the small interior trim piece that is located in the front corner of the door right above the door panel. Then you can access the three 10mm nuts retaining the mirror assembly, If the mirror is powered their is usually enough wiring harness that you can access the connector without removing the door panel....

Oct 19, 2010 | 1997 Buick LeSabre

1 Answer

Driver side front door window will not move. Some sound, but no movement. How to Replace Window motor regulator on this 2000 Buick LaSabre Limited driver's door with multiple controls: Locks, speakers,...


First the door panel must be removed,then you can tell what part is broken.It will probably be the window trac assy.To replace that you must drill out the 3/16 rivets that hold it in and then replacethem with 1/4 -20 bolts on re-assembly.

Aug 05, 2010 | 2000 Buick LeSabre

1 Answer

Replace speakers in 98 lesabre


your front doors you have to pull the door panels
the rears can/should be removed through the truck

Jan 29, 2010 | 1998 Buick LeSabre

1 Answer

1999 LeSabre, had the drivers side view mirror knocked off... How do you replace it? Do I need to take the door pannel off? mirroe is electric but not heated. Thanks


yes you need to remove the door panel,but you can just let it hang no need unhooking any wires,there is only two nuts holding the mirror fast.

Dec 09, 2009 | 1999 Buick LeSabre

1 Answer

How do i change my drivers side view mirror i took off the inner door panel , now what...


should be 2 or 3 10mm nuts that hold mirror to door frame,possibly covered by large black plastic plugs,electrical connection if powered will be very close to mounting hardware for mirror to door

Oct 03, 2009 | 1998 Buick LeSabre

1 Answer

How to remove passenger door panel on 97 lesabre


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror on

Sep 27, 2009 | 1997 Buick LeSabre

1 Answer

1992 - 1999 lesabre drivers front door


The LeSabre had the same body style up until 1999 in the rounded style. So it should fit just fine.

Sep 14, 2009 | 1998 Buick LeSabre

1 Answer

How to remove driver's side mirror assembly and replace


you got to take the door panel off to get to the mirror bolts and wirring i

Mar 28, 2009 | 2000 Buick LeSabre

Not finding what you are looking for?
1998 Buick LeSabre Logo

819 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...