Question about 2006 Nissan Altima

1 Answer

Radio Removal I need to install a fm adapter for my satelite radio and have no idea on how to remove the radio.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Remove the bezel around the radio with the vents in it, the radio will be held in with 4 phillips screws takes about 10 min to do, Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 mercury mountaineer, V6 4.0 2WD. Where is the GEM located?


Module - Generic Electronic (GEM)/Central Timer (CTM) Removal
  1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Depower the supplemental restraint system (SRS). For additional information, refer to Section 501-20B .
  1. Remove the audio unit. For additional information, refer to Section 415-01 .
  1. Remove the center instrument panel finish panel.
    1. Remove the screws.
    1. Remove the center instrument panel finish panel.
    • Disconnect the electrical connectors.
    • Remove the GEM/CTM.
      1. Remove the screw.
    1. Disconnect the four connectors from the GEM/CTM.
    1. Remove the GEM/CTM.
    2. Installation
      1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Special Tool(s) Radio Removing Tool
415-001 (T87P-19061-A) Removal
  1. Remove the radio chassis.
    1. Insert Radio Removing Tool into the radio face plate and release the radio retaining clips.
    1. Pull outward on Radio Removing Tool to remove the radio chassis from the instrument panel.
    2. Remove the radio.
      1. Disconnect the electrical connectors.
      1. Disconnect the radio antenna lead in cable.
      1. Remove the radio.

May 26, 2017 | Mercury Cars & Trucks

1 Answer

How do I remove the instrument cluster dimmer switch in my 2000 Lincoln town car


Switch - Panel Dimmer
Special Tool(s) syg~tr~en~file=st1445a.gif~gen~ref.gif Radio Removing Tool
T87P-19061-A Removal
  1. Disconnect the battery ground cable
  2. Pull out the radio using Radio Removing Tool.
  3. Remove the radio.
    1. Disconnect the electrical connectors.
    1. Disconnect the antenna cable.
    1. Remove the radio.
    2. Remove the instrument panel finish panel bolts.
    3. Remove the instrument cluster finish panel bolts.
    4. Pull out and position aside the instrument cluster finish panel.
    5. Disconnect the electric clock electrical connector.
    6. Remove the instrument cluster finish panel.
      1. Disconnect the headlight switch electrical connector.
      1. Disconnect the dimmer switch electrical connector.
      1. Remove the instrument cluster finish panel.
      2. Remove the dimmer switch.
        1. Remove the screws.
        1. Remove the dimmer switch.
    7. Installation
      1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
        To install, reverse the removal procedure.

Nov 29, 2015 | Lincoln Cars & Trucks

1 Answer

How do I fix the clock display on my 1999 Pontiac Sunfire?


It appears to be that the radio clock display has malfunctioned, and is due for a replacement radio, which could be an aftermarket or oem radio, maybe found at a junk yard.

Tools required for oem replacement radio, torx keys set.

Before working on the radio or other electronics, disconnect the battery cables with 8mm wrench.

Replacing the oem radio is much easier, if you obtain oem radio, compared to aftermarket radio, due to being direct fit.

The radio is same for 1995 to 1999 Pontiac Sunfire and the Chevy Cavalier, regardless of sub models, such as SE,GT, VL,VLX,Z24. etc.

Parts needed for the the aftermarket radio install :Stereo assembly, stereo wiring harness adapter, radio antenna adapter, and dash install kit.wiring diagram for the wire colors / functions, along with tools, such as torx key set, screwdrivers,wire crimper, wire stripper, double ended wiring connectors, hair dryer.

The oem stereo removal video is for the 2000 to 2005 Sunfire / Cavalier, but are the same or very similar procedures.

Link to oem stereo removal procedures.
Pontiac Sunfire Radio Repair and Removal 2000 2005



Link to aftermarket stereo install / connect procedures. ( Sunfire Video )
HOW TO INSTALL AFTERMARKET STEREO PONTIAC SUNFIRE

Link to aftermarket stereo install / connect procedures. ( General Video )
How To Install Car Stereo Single Double DIN Car Audio 101


Have a nice day.


May 12, 2015 | 1999 Pontiac Sunfire

1 Answer

Radio antenna


YOU NEED TO CONTACT SIRIUS CUSTOMER SUPPRT

Feb 19, 2014 | Volvo XC90 Cars & Trucks

1 Answer

Isuzu dashboard lights dont work after replacing radio 1998


Did you install an aftermarket radio? Did it have a wiring harness adapter kit for the installation? If so, the adapter should have made the install a plug-and-play operation. If not, and you sppliced wires into the vehicle's dashboard wiring harness, you could have cut into something you shouldn't have. More than likely, during the removal of the old radio and installation of the new one, you inadvertently disconnected a non-radio plug/jack on the dashboard wiring harness. If someone else did the work, take it back to them and ask them to make it right.

Sep 27, 2013 | 1998 Isuzu Rodeo

2 Answers

I need to remove my 6 cd changer am fm radio how does ut come out please help so i can replace it


you need the radio removal u shaped tools. you can buy for $5 at uto store.

SECTION 415-01: Audio Unit 2002 Escape Workshop Manual
REMOVAL AND INSTALLATION Audio Unit
Special Tool(s) s2k~us~en~file=st1445a.gif~gen~ref.gif Radio Removing Tool
415-001 (T87P-19061-A)
Removal and Installation
  1. Disconnect the battery cables. For additional information, refer to Section 414-01 .
  1. Remove the audio unit.
    1. Insert the special tool into the radio face plate and release the radio retaining clips.
    1. Pull outward on the special tool and remove the audio unit from the instrument panel.
  1. Disconnect the connectors.
  1. To install, reverse the removal procedure.

Apr 22, 2011 | 2002 Ford Escape

1 Answer

Removal of radio


Radio Reciever/Amplifier/Tape Player/CD Player REMOVAL & INSTALLATION Fig. 1: Remove the bezel retaining fasteners and the bezel . . . 86746p02.jpg
  1. Disconnect the negative battery cable.
  2. Remove the center cluster screws and bezel.
  3. Remove the radio attaching screws.
  4. Disconnect the radio from the instrument panel wiring harness and antenna.
  5. Installation is the reverse of removal. Fig. 2: . . . then remove the radio retaining fasteners 86746p12.jpg
    Fig. 3: Slide the radio forward so that you may gain access to the electrical connections 86746p13.jpg
    Fig. 4: Disengage the antenna and radio electrical connections 86746p14.jpg
prev.gif next.gif

Oct 17, 2010 | 1993 Jeep Grand Cherokee

1 Answer

When I turn on the radio it plays for a couple minutes but then it shuts off. It then won't turn back on. Its all stock. Any ideas how to fix this?


That radio is easily removable. check power at the power connections and if they are good, either replace with a new aftermarket unit of your choice (also buy adapter harness and face plate adapter to help with the install) or, get a used radio from any scrapyard.
If you need removal instructions, you can get that in any haynes or chilton manual. (and, you can use the manual to repair other problems as well!!)

Jul 31, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Satelite Radio


You need to subscribe to Sirius Satellite Radio. Call them at 1-888 539-7474 and they can walk you through the procedure. Once you start listening to satellite, you will never want to listen to AM/FM again.

Mar 19, 2009 | 2005 Dodge Durango

2 Answers

Car radio install


There should be an actual wire harness for radio back in there somewhere, maybe tied up or bundled up, just have to find it, then buy from stereo or automotive supply place, an adapter that will go from factory plug to your other stereo, and it will make installation much, much easier.

Aug 17, 2008 | 2008 Chevrolet Express

Not finding what you are looking for?
2006 Nissan Altima Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...