Question about 1995 Toyota Camry

1 Answer

Reverse suddenly quit 95 toyota camry 4cyl auto

My reverse suddenly quit in my 95 toyota camry 4 cyl auto

Posted by on

  • jerryhollis May 25, 2009

    On the 95 camry 4cyl auto, Ok, I know this may sound dumb....but how do I check the solenoids that are in the trans pan? thanks

  • jerryhollis May 25, 2009

    Ok, I plan to try this in the next few days, funny that I had the routine transmission service done at 59800 miles to try and prevent anything like this, now at 63xxx miles...hopefully just the fluid, thanks again, I'll let you know..

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Check your transmission fluid level asap. if the level is good, you will need to inspect the shift solenoids located inside the transmission pan. replace any solenoids that are proven to be faulty. i would also advise to test the pcm/tcm for its operational value as well. this device controls the shifting patterns of the auto trans.

while checking the solenoids, if you notice any metal fragments on the bottom of the pan, this will be a sign of major gear friction. you should re build in this case.

Posted on May 24, 2009

  • Michael Masters
    Michael Masters May 25, 2009

    OK, the transmission has a pan that is in the bottom of the transmission housing. you will need to raise the vehicle to access the pan safely and, you will need to drain all fluid as well. once the fluid is drained, relieve the screws o the outer edges of the pan and remove. their will be a gasket that you will need to replace once you remove this pan. the solenoids will be visible once you remove the transmission pan.



  • Michael Masters
    Michael Masters May 25, 2009

    you can use a volt meter or ohm meter for testing. use the solenoid wire clips for testing.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

Toyoto fuel filter location 1995 camry 4 cyl


For 1995 Toyota Camry 2.2L EFI DOHC 4cyl the Fuel Filter is located under hood, driver side, front side of strut tower, mounted on fenderwell in fuel line .

Hope this helps (remember to rate this answer).

Apr 18, 2011 | Toyota Camry Cars & Trucks

1 Answer

1995 Camry 4cyl, auto, will not go into reverse, fluid was low so filled back up and still will not go into reverse?


try flushing the transmission. But it sounds like your reverse is out and you need a different transmission

Jan 04, 2010 | 1996 Toyota Camry

1 Answer

How to replace a fuel pump to a 4 cyl 1993 camry


The fuel pump is located in the fuel tank and it can be reached by removing the back seat of the car.

be sure to get a fuel pump of the same rating with the one you are replacing.

Good luck.

Nov 09, 2009 | 1994 Toyota Camry

1 Answer

How to replace a starter on a 2003 toyota camry 4cyl


simple. by a replacement starter at your local parts store and follow the instructions that come with it. The 4 cyl is too easy to even describe. Save the old starter for a deposit refund.

Sep 30, 2009 | 2006 Toyota Camry

1 Answer

Reverse doesn't work


Worn clutch plates. Reverse & first gear uses the same clutches so how is 1st gear running out as you drive off? Slips a little?

May 24, 2009 | 1993 Toyota Camry V6

1 Answer

Plugs for Camry 2000 4 cyl.


The plugs that are supposed to be in a 2000 4 cyl Camry are :
PK20TR11 Toyota P/N 90919-01194

The K16TR11 plugs fit a variety of models.
They are found in the following units:

98/99 Corolla
95/97 Paseo
95/98 T-100 V-6
95-04 Tacoma V-6
00/04 Tundra V-6

There is no question that your dealer installed the wrong plugs.

I would really appreciate a FixYa rating for the information that I have provided you. Thnaks in advance.

Jan 25, 2009 | 2000 Toyota Camry

1 Answer

Reverse switch location


its normally near the gear shift

Oct 11, 2008 | 1990 Toyota Camry

Not finding what you are looking for?
1995 Toyota Camry Logo

1,055 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...