Question about 1991 Chrysler Imperial

1 Answer

Power Windows I have power windows in my 1991 Chrysler Imperial and the switches on all doors do not work. However I checked the fuse box and it doesn't seem to show a fuse for power locks on the fuse box cover, nor on the relay cover underneath the hood. Is there a way to fix this problem please?

Posted by on

  • feelslykpara May 24, 2009

    Thank you I will check there!

  • feelslykpara May 24, 2009

    Actually, I switched that circuit breaker and that wasn't the solution to the problem, is there any other things I could do if that did not work?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Power windows, Seats, and everything in a car that has heavy duty motorized accessories has a circuit breaker instead of fuses. They are located in the fuse box and are silver in color

Posted on May 24, 2009

  • frank thomas wilson
    frank thomas wilson May 24, 2009

    Power windows, Seats, and everything in a car that has heavy duty motorized accessories has a circuit breaker instead of fuses. They are located in the fuse box and are silver in color

  • frank thomas wilson
    frank thomas wilson May 25, 2009

    There is an relay that will be located somewhere inside the car. I would think it will be under the dash board. That will be all I can think of if all switches are bad. I seriously doubt if all wires are all open (broken or shorted ) in the conduit between the door and the pillar hinged area

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dose one fuse control both power windows on 2005 town & countrry


Probably is only one fuse, just check all the fuses in the fuse box. Check for broken wire in the door jam, but you may need new window motor or new control switch on the armrest. Is there any noise from the door when you push the buttons? If you hear the motor running, then you need that track that pushes the window up and down.

Feb 18, 2015 | 2005 Chrysler Town & Country

1 Answer

I have a 2002 chrysler 300m, none of my power windows work


u need to start by checking the fuses. U didn't say if u checked all the switches on the doors themselves. If the door switch will work then your problem will be with the master control on drivers door. Hope this helps

Mar 15, 2014 | 2002 Chrysler 300M

1 Answer

All windows except the driver's side are not working.


First, if the driver's window is working, there is no need to waste your time looking for fuses. ALL of the windows are powered by the SAME fuse.

The first thing I recommend checking is the window "lock" switch on the master switch. If it is in the "lock" position, none of the other windows will work (it is designed to do that)

Other than that, you need to check for power and ground at all of the other door switches. The BLUE/BLACK wire at each of the switches should have battery voltage anytime the ignition switch is in the ON position. If they do not, the wire is broken between the splice near the driver's door and the right front door. Both the RED and the GREEN wires at each switch should have continuity to ground anytime the master switch is at rest with the "lock" switch in the unlock position (the lock switch breaks these grounds to "lock" the windows and prevent them from being operated).

Jan 31, 2012 | 1991 Mitsubishi Montero

1 Answer

My power windows in my 1998 chrysler cirrus stopped working, there is power going to the fuse box for them and the fuse is fine but the whole to plug the fuse into is not transmitting the power all other...


check the wireing between the drivers door and the post where the wires come out of the door from opening and closing the wires sometimes fray and break losing power to main switch

Jun 04, 2011 | Chrysler Cirrus Cars & Trucks

2 Answers

Gauges not working


First check fuses, next, connection harnesses and finally, wires.

Keep us updates.

Oct 28, 2010 | 1991 Chrysler Imperial

2 Answers

Where is the fuse for power windows?


I know on a 83 its located by the glove compartment ,, try looking there

Aug 02, 2010 | 1990 Chrysler New Yorker

1 Answer

The AC and power windows just stopped functioning yesterday, on my 1991 Chrysler Imperial. I don't see a fuse that has both functions associated. Any help would be great. Thanks David


Take a look at thse two and replace them:

Fig. 3: Relay and flasher module — Dynasty, New Yorker (1989–93), Fifth Ave. and Imperial

(This is for the power windows)

8e52d5e.jpg
The fuse panel, which contains fuses and circuit breakers, is located behind the glove box door. Additional fuses are in the Power Distribution Center located near the left side strut tower in the engine compartment. Each item is identified on the cover of the Power Distribution Center.

There is an additional relay module (relay and flasher module) located to the right lower corner of the instrument panel (Dynasty, Imperial and Fifth Ave.) or behind the cup holder (New Yorker). A relay or flasher can be removed by pulling it straight down from the module.

Jul 22, 2009 | 1992 Chrysler Imperial

1 Answer

I have no power to my electric windows or blower fan on my chrysler imperial1991


check the voltage levels on the battery using a voltmeter or a multimeter. if they are low and fast dying then replace the battery

Jun 06, 2009 | 1991 Chrysler Imperial

Not finding what you are looking for?
1991 Chrysler Imperial Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...