Question about 2003 GMC Envoy

1 Answer

The change oil soon light turned on, so i changed the oil, but still the change oil soon light takes time to turn off when i turn the car on

The change engine oil light takes time to turn off even the oil is still new

Posted by on

  • eastangel_16 May 24, 2009

    i also changed the oil filter

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Faulty check valve in the oil filter replace oil filter.

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Engine management light on car runs fine


Service engine soon or check engine light? Engine light needs scanned for codes. Service engine soon is for oil changes and such. To get rid of service lights, turn the key on, press the gas pedal three times within five seconds. The light will flash. turn the key off. it's reset. At least check or change the oil and filter though.

May 30, 2015 | Cars & Trucks

1 Answer

Check engine light solid


Most of the newer vehicles have a senser that will turn the check engine light on, even when it's time to change the oil. After they change it, they reset the check engine light to turn it off. It could be something as simple as that or even an air filter needing to be changed. The dealer can tell you how to reset that light to turn it off. Good luck!

Nov 14, 2013 | 2003 Chevrolet Silverado 1500

2 Answers

How do i reset the oil change light in a 2003 olds alero


turn key on (dont start engine) floor gas pedal 3 times 1,2,3. turn key off, now start engine it should go off, if not try it again.

Aug 03, 2011 | 2003 Oldsmobile Alero

2 Answers

The change oil light came on. on my friends 2002 monte carlo ss so i gave it an oil change and a new filter . the light won't go off.


The "Oil Change Reminder Light" has to be reset.

To reset the oil change reminder light with the accelerator pedal, turn the ignition switch to the ON position. Do not start engine. After turning the ignition ON, depress the accelerator pedal fully to the floor and let it up again 3 times within 5 seconds. The oil change reminder light should flash a few times to let you know that it is resetting. If it does not flash, turn the switch OFF and repeat the procedure. After it flashes, turn the ignition switch OFF. Then start the engine. The light should come on for a bulb check then go out and stay out.

Apr 12, 2011 | 2002 Chevrolet Monte Carlo

2 Answers

The engine warning light wont go off, (Mazda 6) even after oil, water and coolant have been added. is it time for an oil change?


Yes it is time for an oil filter and oil change specially if there is a lapse of over 10 months or a mileage of more than 5000 miles clocked since the last oil change.

Jan 29, 2011 | Mazda MAZDA6 Cars & Trucks

3 Answers

How to turn off oil light after oil change


I hate to be the bearer of bad news, but I very seriously doubt simply changing the oil will solve your problem. Your oil light is signifying a potential problem which your vehicle is trying to tell you about. I would check into the oil sending unit, oil pump, or if equipped possibly even the oil temperature sending unit.

Mar 08, 2010 | 2006 Toyota Tacoma

1 Answer

My engine oil light stays on all the time even


have you tried changing the oil sending unit they can get bad also make sure wire to sending unit did not get pulled off

Oct 22, 2009 | 2000 Chevrolet Tahoe

2 Answers

Oil light wont turn off


first you need to check your oil level to make sure it's got enough oil in the engine.... next you should take it to a garage to have the oil pressure checked... there may be something wrong with the oil pump.

Apr 15, 2009 | 2001 Volkswagen Beetle

2 Answers

The check engine light is on and the check oil light stayed on even though the oil was just changed


If your engine isn't rattling, the oil pressure is probably OK; I wouldn't drive it far until you have someone with a pressure gauge check it however. This normally takes only a couple of minutes of service time. 

The oil pressure sensor/sender is one of the most unreliable devices in our cars for some reason - maybe just cheap. Your car probably also has the pressure sensor telling the computer to turn on the 'check engine' light too so if the sensor fails, you get both.
There is a remote possibility that the oil pump has failed but they are more reliable than the sensor and if you haven't noticed any change in engine noise, you are only a few bucks away from a 'no idiot lights' condition. 

Dec 12, 2008 | 1998 Pontiac Grand Prix

5 Answers

Check Oil light stays on even after the oil has been changed


well, it is in the manual under engine oil. turn key to on, dont start. press gas pedel to the floor "slowly" 3 times within 5 seconds. if the change oil light flashes, its resetting. If not, repeat.. this worked for me.

Jul 02, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
2003 GMC Envoy Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...