Question about 2004 Infiniti G35 Sport Coupe

1 Answer

The cupholder is closed and won't open.

There was a small plastic bag in the cupholder compartment when i closed it and it must have jammed up the mechanism that permits you to open and close the cupholder compartment.

Any ideas. I am going to find an '05 infiniti to look at the cupholder so that it will give me an idea on how to get it working again...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

U need to take apart the center console..once u remove the cup holder u need to file down the little nibble just a tad bit and it will work just fine

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW CAN I GET MY SUN ROOF CLOSED ON MY 1997 TOYOTA FOUR RUNNER LIMMIED


The truck should have came with a small manual crank to close it in just such an emergency. It is usually located in the glove compartment and there should be a piece of plastic trim that can be removed between the sunroof and the windshield that reveals a hole to insert the manual crank.

Sep 07, 2014 | Cars & Trucks

1 Answer

Mazda 3 2010 driver's door locked and won't open


This is what fixed the my car's driver's door that was stuck closed and locked: the plastic piece that function as the manual lock/unlock on the inside of the door (it's black but when the door's unlocked it has a red side facing out) had essentially popped out and everything was jammed. So you push the button back in while you flip the inside handle open. But maybe I was lucky, in that it was only the button that was jammed.

Feb 03, 2013 | 2010 Mazda 3 1.6

1 Answer

I have 2001 Buick Regal where when the heater/ac is turned on you can hear the fan work but the vent won't open and close.


When you say that the "vent won't open and close" do you mean that the mode control is stuck on defrost - no matter which position you put the switch in? If this is the case, you most likely have a broken vacuum line in your engine compartment. You will find a plastic vacuum line going through your firewall. This line connects to the intake manifold on your engine. I can't tell you exactly where, because the service manual doesn't actually say and also you forgot to mention which engine you have. You will find it if you look for it. The plastic line is most likely broken. This can be fixed by using a small piece of rubber vacuum tubing to "splice" the line back together.

Oct 04, 2011 | 2001 Buick Regal

1 Answer

My son pushed down the plastic lever (not the child lock) on the inside of the door. Its stuck and the doors won't close. this happened before but I can't remember what I did to fix it. Help! I...


now call me easier to walk you through over phone or i will need to write a whole book 704-777-5274 nik.all i ask is a small donation if you want to donate.

Sep 15, 2011 | Honda Accord Cars & Trucks

1 Answer

How do you get into the battery compartment to change the battery?


The battery compartment is located right behind the center console in the G-class. To access it you will need to remove the cupholder assembly. It should have only 2 screws holding it down. Once you remove those screws and move the cupholder to the side you should be able to lift up the carpet so that you can remove the battery cover. If you have any problems let me know and I will try to help in anyway I can.

Jan 25, 2011 | 2007 Mercedes-Benz G500

1 Answer

Storage compartment with sliding top is jammed and won't open


best bet to pry it opened with a plastic screw driver

Aug 26, 2009 | 2008 Honda Pilot

1 Answer

Replacing the broken cup holder


First, you must remove the floor console bezel (the trim piece that surrounds the shifter knob). The proper method to remove this involves removing the shifter knob first. This is held in by a small set screw on the "radio" side of the knob. To remove the screw, you will need a small "hex-key" (also known as Allen key or Allen wrench). The proper size is 3mm, but you can get away with using a size 7/64" if you need to. Once loosened, I believe that the knob pulls right up and off. Make sure you do not lose the small screw. Also be careful not to accidentally contact the tip-top of the shifter while the knob is removed, as this may break off the small black plastic tip, which will require much more work to repair and/or replace the entire shifter.
Next, you should be able to remove the floor console bezel by prying gently and carefully on the corners and sides of the piece with a tool called a trim stick, or if you do not have this tool, you can get away with using a small, thin-tipped flat head screwdriver. However, this will almost surely cause some aesthetic damage to the edges of the trim.
Once this bezel is out of the way, (you shouldn't have to remove the electrical connectors on the underside of the bezel for this specific job) there are 2 screws holding down the bottom of the cupholder assembly. I believe these are both Torx - type screws, which will need either a T10, T15, or T20 screwdriver bit to remove(I'm sorry but I don't remember exactly which of the 3 sizes are used). After these 2 screws are removed, open the armrest. On the TOP of the FRONT of the armrest, just above the cupholders, are 2 more screws which should be the same as the 2 bottom screws. Remove these, then lift the cupholder assembly up and forward to remove it.

To install, simply reverse the above procedure.

Because this is my first solution posted on this site, I would love to have your feedback. Please let me know how everything goes with this project. Thank you!

Mitchell

May 23, 2009 | 2002 Dodge Intrepid

1 Answer

97 Subaru Legacy Outback AWD has electric pain.


Hello:
Sounds like the dasboard ground isloose. Usually located at one end or the other snd attached with screws from metal dash frame to metal in body nearby. very short wire or a srip of stainless steel braiding.. iThe consol is also grounded. Good luck

May 14, 2009 | 1997 Subaru Legacy

1 Answer

2001 forester


If you are looking to get at the section from the cupholder down to the cigarette lighter, start with the screws you can access when the cupholder is pulled out. If I remember correctly, after those are out you can pull the rest slowly out from there.

Dec 25, 2008 | 2001 Subaru Forester

Not finding what you are looking for?
Cars & Trucks Logo

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...