Question about 1993 Nissan Altima

1 Answer

Got a 93 nissan altima 2.4 eng wont turn over

I changed one of the injectors and i cant get the car to turn over now what else should i look at

Posted by on

  • Bruce Hathcock May 11, 2010

    did you cycle the ign. switch on and off for a few minutes to clear air in the system? Did you have someone hold the shradr valve down while turning the key to the run postion only until you got fuel and if yo did not get fuel do you hear the pump whirr for two seconds when you turn the key to the run postion only, not the start?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Did you hydo lock motor with fuel? or do you mean the engine wont start?

Posted on May 29, 2009

  • rhyno492000 Mar 30, 2011

    i got the same problem wit my 93 nissan...i changed the fuel filter and pump, and my car still does not want completely start..what else can be causing my car from starting...please send me some tips at my email address
    Rhyno492000@yahoo.com
    Thank You very much for your time

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need help figuring out what the meaning of Eng MTG and ENG cont for a Nissan Altima SL 2.5 2006 in the fuse box and do I need them


YES you need them, ENG MTG is the Engine Management system, and the ENG CONT is the
Engine Control system so you see if they are disconnected you will have a good time wondering what is up with the car

Dec 12, 2016 | 2006 Nissan Altima

3 Answers

I cant start my cant. with a obd2 code readers i got a code and it say missin fire cilinder three. i have check it and had a bed spark.i change all of them and did not start.check for fuel pomp and there...


check if the injectors is getting gas
  1. there is a hose from the fuel filter to the injector rail,
  2. disconnect from the rail and place it in a bottle
  3. turn the ignition on and you should see gas pump into the bottle.
check to see if the injectores are opening
  1. remove the injector rail, together with the injectors, hooses and eletrical plug intact.
  2. face the injectors up and away from the engine
  3. have someone tumble the vehicle, you should see gas pump out the injectors.
If there isnt any, then check to make sure the injectors are getting power.

Aug 03, 2008 | Ford Ranger Cars & Trucks

2 Answers

Fuel injector


Shimon, If same year for sure injectors would be interchangeable in the Sentra and Altima.

2006 NISSAN ALTIMA 2 5L L4 Fuel Injector RockAuto
2006 NISSAN SENTRA 2 5L L4 Fuel Injector RockAuto

Jun 13, 2016 | 2006 Nissan Sentra 2.5

1 Answer

The engine will not turn over, crank senor maybe


MAYBE? It could be many other things too. Do you have spark, gas from the injectors, fuel pressure, does the engine turn (combustion), exhaust pressure. Start by scanning the computer, any codes to work with? Do you smell gas,Then try pulling the plugs, wet w/ gas? Maybe loss of spark. Checking for spark & to ck the fuel injectors require specialized equipment. I cant go any further unless you are equipped. Getting back to your original question, yes I've changed many crank sensors for no start problems. Have it ckd before you just throw money out the window. Good luck

Oct 24, 2015 | 2000 Oldsmobile Bravada

1 Answer

93 altima same fuel injector goes bad 2 times in 1 month


how did you find out it is the injector causing the problem? the injectors are wired in series on these vehicles, it is possible that another faulty injector may be causing the problem. although it may be difficult to find if this happens intermittently. A scope test may be the only way to find the problem. Does the engine light come on with a misfire code on Cylinder #1? P0301 or r u just getting a random misfire code P0300 ? a bit more info on the vehicle may also be helpful........ engine size? # of cylinders 4 or 6 ?

Dec 06, 2013 | 1993 Nissan Altima

1 Answer

Fuel injectors


For jeep grand Cherokee fuel injectors replacing, i suggest you to go the help oink provided below:-----

Its a complete step by step procedure to do so:-----


Fuel Injector Replacing Jeep Grand Cherokee

http://www.howtorepairguide.com/2012/11/fuel-injector-replacing-jeep-grand.html
-------------


How to Replace a Fuel Injector
http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-fuel-injector.html-----------

How to Test and Replace Fuel Injectors on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-test-and-replace-fuel-injectors.html
------------

How to change fuel injector on 2005 gmc envoy?
http://schematicsdiagram.blogspot.in/2012/03/how-to-change-fuel-injector-on-2005-gmc.html
------------These will help.Thanks.

Nov 28, 2012 | 2002 Jeep Grand Cherokee

1 Answer

I have a 90 pontiac boneville starts good but when i press the gas the car turns off change gas pump and other electronic thing and cant seem to get to work


sounds typical of when these early injectors fail they just quit working after warm i would test the injectors resistance after reaching normal operating temp

Jun 12, 2011 | 1990 Pontiac Bonneville

1 Answer

93 altima.running on 3 cyliners, spark to ALL 4 CYLINDERS, BUT 1ST CYLINDER, not firing. Maybe fuel injector???


CYLINDER 1 COULD HAVE A BAD FUEL INJECTOR.OR SHORT IN THE WIRING TO 1 FUEL INJECTOR.

Mar 04, 2011 | 1993 Nissan Altima

1 Answer

After mud and water went through my fuel system a mechanic advised me to change injectors,rail and injector pump but cant get injectors out. It is 3ltr turbo diesel common rail.


your filters should have prevented mud from getting to your injetors, water in the system can cause some problems but nothing so drastic as to change the injectors injector pump or the rail....change your filters, water collectors. make sure there is no more mud or water in your tank . not familiar with that particular engine but you may have to bleed the injection system....oh and get a new mechanic

Feb 26, 2011 | Isuzu Rodeo Cars & Trucks

Not finding what you are looking for?
1993 Nissan Altima Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...