Question about 1996 Acura Integra GS-R

1 Answer

Trying to change it!

Trying to the change the coil on a 96 acura gsr and I cant figure out how to get the rotor off to pull the piece of plastic off to get the coil out?!?!?!?!? HELP PLEASE!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

You need anoughter person to turn the engian over because theres a screw on the rotor and then the plastic peice after you take the screw out will pull off

Posted on Sep 26, 2009

  • John Cole
    John Cole Sep 26, 2009

    you need anoughter person to turn the engian over because theres a screw on the rotor and then the plastic peice after you take the screw out will pull off

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

94 Acura Integra wont Start


jump timing loosen distributor and plus or minus turn and retighten

Mar 09, 2013 | 1994 Acura Integra

1 Answer

96 Z71 new coil,ignition modual,plugs,wires,cap&rotor,spark from coil,no spark at plugs


Hello: Remove the distributor cap. Check the rotor, see if there is a black spot where the metal piece makes contact with the carbon stick out tha makes contact with the coil. Did you replace that piece when you replaced the coil, it should have come with the new coil? Also did you reinstall the ground strap that was under the coil and went to the stick-out that the black connector plugs into the cap?

Aug 31, 2011 | 1991 Chevrolet C1500

1 Answer

96 acura tl 2.5 rough idle after warm up with rpm swings ignition and fuel pressure good sparkplugs black and new codes; primary o2 heater circuit bad missfire cyl.5 random missfire


REPLACE DISTRIBUTOR CAP AND ROTOR REPLACE SPARK PLUGS AND WIRES IF NOT BEEN CHANGED IN LONG PERIOD OF TIME.CHECK IGNITION TIMING.CHANGE AIR FILTER CLEAN FUEL INJECTORS.IF ENGINE STILL MISFIRE IGNITION COIL IS WEAK OR YOU HAVE LOW CYLINDER COMPRESSION.

Jul 21, 2011 | 1996 Acura TL Series

1 Answer

WANT TO KNOW HOW TO CHANG ROTORS ON 2000 ACURA INTEGRA GSR


TO CHANGE FRONT BRAKE ROTORS. FIRST YOU NEED TO SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.MAKE SURE VECHICLE PARKED ON LEVEL SOLID GROUND.YOU NEED TO REMOVE BRAKE CALIPER BOLTS AND THE CALIPER FROM THE KNUCKLE.DONT LET CALIPER HANG BY BRAKE HOSE USE A PIECE OF WIRE TO SUPPORT CALIPER.REMOVE THE DISC BRAKE ROTOR RETAINING SCREWS IF EQUIPPED.IF THE ROTOR WILL NOT EASILY PULL OFF,SCREW TWO 8MM BOLTS INTO THE DISC BRAKE REMOVAL HOLES AND TURN THE BOLTS TWO TURNS AT A TIME TO PRESS THE ROTOR FROM THE HUB.

Mar 19, 2011 | 1996 Acura TL Series

1 Answer

What is the torque pattern for the head on a 96 acura integra gsr i already kno what ft. lbs they all are i just need to kno what pattern to torque them in


<P>all cylinder heads are the same start at the middle then work outwards like&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;11.9.3.1.6.8.14.</P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 13.7.5.2.4.10.12.</P><P>start with 1/2 torque then 3/4 then full torque.then recheck ALL BOLTS after 250 miles.</P>

Aug 25, 2010 | 1996 Acura Integra GS-R

1 Answer

My 1991 Acura integra LS is cutting off while driving. it wont start back up unless it sits for 20 mins. if I try before 20 minutes, you will just here it trying to turn over. I've change the fuel filter,...


You'll need to replace the distributor as an assembly, they are a very common problem and sold at any good local parts store fairly cheaply. Remove the cap first to note the position of the rotor. The distributor only goes in one way, but it's easier if you know which way to point the rotor when you install it. It's a good idea to re-time it after the install but if you mark the location of the old one, you can get pretty close if you put the new one in the same spot.

Jul 29, 2010 | 1991 Acura Integra Hatchback

1 Answer

Acura 96 rl wont start. Checked all fuses ender the hood and in the fuse panel. Pulled starter relay and checked connectivity also ignition switch plug. All points checked out. Cant find neutral switch and...


since youve said that al other checks were good then im lead to believe that the ignighter is bad usually you can find this under the dist.cap you will have to take the cap off remove the coil and this will give you access to the ignighter pull it up and out disconnect the wire harness and replace with a new one.

Jul 05, 2010 | 1996 Acura RL

1 Answer

When idling my 2003 Acura TL the engine seems to want to almost die, also when i got on the freeway it seem to pull hard and **** like it was having trouble shifting into 5th gear. It also seems to run...


You may need to change the coil pack(s) or modular. The modular is what the coil pack(s) mount to. I'm not familiar with that engine so you may have a 3 piece coil pack, or a 1 piece. (If it doesn't have a distributor). You may first try replacing the coil wire. There is a good chance that is loose, or bad. It could also be the coil itself. Try the coil wire and if it still acts up, then try the others. Also, when you changed the plugs, did you put new plug wires? When I do a tune up on my vehicles, I change the plugs, wires, distributor cap and rotor, (coil pack,modular), whichever is equipped, oil, oil filter, tranny fluid and filter with gasket, valve cover gaskets, oil pan gasket oil filter, and fuel filter. Try changing the fuel filter as well, as plugged or dirty fuel filters can cause stall outs. I hope this information helps. Thank you for choosing fixya.com for answers.

Apr 01, 2009 | 2000 Acura TL

Not finding what you are looking for?
1996 Acura Integra GS-R Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...