Question about 2007 Suzuki Grand Vitara 4WD

1 Answer

First gear slipping or jumbing while shifting to first

Gear jumb out from first. shift gear to first and just release from the clutch pedal gear lever return to nutral.i changed only f/gear hub and sleeve and synchronizer ring,except ist gear.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Our 07' gv did that when it was brand new.... it was a manufacturers flaw... if you take it to the shop they will replace it... im not a mechanic so forgive the explination... but some link join or something somewhere was actualy the wrong size or a flawed design which they have fixed now... suzuki replaced ours for free and provided the rental car to use while it was in the shop.

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just put a new slave cylinder and clutch master cylinder on a 2003 Honda accord 3.0 V6 six speed and you can shift the gears without the clutch pedal pushed in or the car started


that is normal if the gear synchro dogs ( teeth) are in line in the box
problems concerning a clutch are
slashing gears when trying to engage first or reverse with the pedal to the floor ---needs bleeding
slipping when the clutch pedal is released--- slipping clutch from the pressure not being released ---problem in master cylinder
reverse gear is the only gear not synchronised so even with the clutch depressed it is possible sometimes that it will not go into gear unless you let the clutch up to move the gears in the box then attempt to re-engage reverse

May 04, 2016 | Honda Cars & Trucks

1 Answer

My clutch goes all the way to the floor I have a standard Camaro 96 3.8


clutch pedals are suposed to go all the way to the floor , you sure you dont mean brake pedal (cus thats bad ! ) clutches should travel all the way to floor and release the "grab" of the engine about 2/3 down , this way they are more smoothly allowing shifting thru the gears and not jerking as you shift thru the gears , if clutch pedal does not start to "grab" the engines power by 2/3 off the floor and fully "grab"its power all the way up(slipping) ,and you have a hydraulic clutch (96's do) then the clutch disk may require replacement or there is a oil leak in the clutch/master/slave cylinder , look for small oil leaks from under car in area of foot pedals
clutches should be replaced as an assembly that includes , disk ,pressure plate, throwout bearing , with engine side clutch plate magnafluxed for heat cracks and any hydraulic oil leaks replaced or repaired

Mar 12, 2015 | 1996 Chevrolet Camaro

1 Answer

My Kia Rio is struggling to get into gear. I have to be going at least 3000rpm before the gears will shift and sometimes have to completely turn it off to get it into first from reverse. Shifting whil


Being shut out of gear like that is an indication that your clutch is not disengaging even when the clutch pedal is down. Revving to 3000 rpm matches speeds inside the gearbox, in effect shifting without clutch action.

I believe your clutch cable is broken, unattached at one end or the other, or is too slack to release the clutch.

Feb 03, 2015 | 2002 Kia Rio

1 Answer

1998 Saturn SC1 manuel stick is hard to shift into 1st & 2nd gear


Try to double clutch the clutch pedal. How to double clutch; push the clutch in moving the stick to neutral, then release the clutch and then push it back in and shift into first or second gear. If it works then it is not the shift linkage and could be a clutch adjustment. First how far do you have to release the clutch pedal until the clutch plate starts to engage? If only an inch or so the clutch pedal needs to be adjusted, which is an easy fix (this is more common). The other possible problems could be the clutch plate, throwout bearing of syncros could be bad. If it is one of the previous problems double clutching should buy you some time.

Jul 01, 2010 | 1998 Saturn SC

1 Answer

I have a 89 toyota pickup 4 speed. When I'm stopped at a stop light, and let out on the clutch it seems like it has lost pressure. When I'm shifting down the road it shifts fine. I checked the fluid and it...


this sounds like the clutch slave is goin out, this unit is on the outside of the transmission. Possibly losing pressure!! Your transmission does not use transmission fluid, but instead gear oil. Have the following checked:
1. Clutch Slave (possibly worn)-this will cause soft or hard clutch pedal feel, slipping clutch, unintended clutch release, hard gear engagement, no/insufficient clutch movement.

*2. Clutch pedal Mounting Plate (possibly cracked)-this will cause improper gear engagement, hard gear engagement, soft pedal feel, insufficient clutch movement.

*this plate is located above the clutch pedal itself, apply pressure on the pedal with one hand while inspecting the plate for fatigue cracks(use a bright flashlight). This is very common on these models. This problem will eventually get worst and most mechanics never figure this out.

more questions email me at gimconsulting@ymail.com!!

Mar 15, 2010 | 1989 Toyota Pickup SR5

1 Answer

1998/99 Dodge Dakota clutch and manual transmission problems


clutch needing replaced, very common on all manuals

pedal travel adjustment,yes
gear shift adjustment,no

May 12, 2009 | 1998 Dodge Dakota

1 Answer

When i put into gear and press on the gas and the clutch out the engin revs but the car goes no where. I HAVE SIMMILAR PROBLEM. CLUTCH PEDAL IS VERY HARD ENGINE RUNNING, CAN SHIFT BETWEEN GEARS WITH...


WITH ENGINE ON & RUNNING and you are able to shift to any & or all Gears and with this theres,
No Clutch Engagement Upon Releasing Clutch
With Info Provided seems that you have 1 or all 3
of the Fallowing and they all Should be Replaced as A Set even if on lt 1 of them has Failed
  1. Clutch Pressure Plate has Failed
  2. Clutch Disc Is Worn Down
  3. Clutch Release Bearing Has Failed
All Require Removal Of Transmission this is the reasoning for Replacing all as SET with the Labor cost if your replace only 1 Item, and 3 Months later another of the 3 components Fail, you have the same Labor cost to PAY.

This Solution is Answering the SOLE Question ask, Barring No other Problems have or did Happen such as Noises Ran out Of Trans Lube. if it is the Clutch that has Failed and you are unable to Perform the Repair yyourself, DO SHOP AROUND get 5 or more Estimates as the Fee Will Vary Sometimes very wide gaps in fee's
and also Try and Purchase the Parts yourself Due to the Tremendous Markup of parts at Shops

I Hope I have Answered you Question to your satisfaction and if you have any more questions Feel free to Ask Me

Jan 13, 2009 | 1992 Toyota 4Runner

1 Answer

Tranny clutch problems in Geo Tracker


well i have test.

if you have 1inch free play in pedal it clutch slips ,
clutch is bad , or the 89 93 bell housings are diffr.

was disk put in not backwards?
is it a new clutch.




Nov 19, 2008 | 1992 Geo Tracker

Not finding what you are looking for?
2007 Suzuki Grand Vitara 4WD Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...