Question about 1997 Mazda 626

1 Answer

Mazda 626 1997 indicator not working

How do i split the cover once i have removed the retaining screws

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 4,369 Answers

It just pulls apart once you remove all the screws. look carefully.

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to remove ford taurus window switch


Door Panels

Print


REMOVAL & INSTALLATION

See Figures 1 through 8
This procedure applies to both the front and rear door panels.


0900c152802604e4.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Remove the cover from behind the inside door handle by gently pulling it out to release the retaining tabs


0900c152802604e5.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Remove the pull cup retaining screw cover and...


0900c152802604e6.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 3: ... remove the retaining screw from the cup and lift the cup straight up out of the door panel


0900c152802604e7.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 4: Remove the two sail panel/speaker grille retaining screws and...


0900c1528026022f.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 5: ... remove the panel/grille from the door


0900c152802604e8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 6: The door panel is retained to the door by 11 retaining clips


0900c152802604e9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 7: Carefully lift the door panel off of the door and...


0900c152802604ea.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 8: ... detach the electrical connectors from the switches and remove the panel from the vehicle

  1. Remove the cover behind the inside door handle.
  2. Remove the screw from the bottom of the pull cup retaining the front door trim panel to the front door.
  3. Remove the two screws retaining the sail panel/speaker grille assembly and remove the panel/grille from the door.
  4. Remove the three screws retaining the front door trim panel to the front door.

Do not attempt to remove more than one pushpin at a time.
  1. Use a suitable tool to remove the pushpins from the door.
  2. Carefully lift the door panel away from the door.
  3. Detach the electrical connectors as necessary and remove the panel from the door.

To install:
  1. Installation is the reverse of removal.

Aug 15, 2012 | 1998 Ford Taurus

1 Answer

Turn indicator/wiper switch assembly replacement instructions please?


steps required to remove and replace indicator switch assembly.
1.disconnect the battery earth lead.
2.from the rear of the steering wheel remove the screws retaining the horn pad..
3.lift the horn assembly away from the steering wheel far enough to remove wiring.
4.Once that is done then move to the next step.
5.Remove the locknut and steering wheel nut .
6.then mark the end of the steering shaft and the steering wheel to correctly relocate and install in same position.
7.then with the correct tool remove the steering wheel from shaft.
8.then once the steering wheel is removed you can then move on to removing the lower steering column cover screw and then remove cover.
9.disconnect the wiring from the multi point connector under instrument panel.
10.release and free wiring harness.
11.unscrew and remove the hazard switch knob.
12.remove the dipper-wiper switch securing screw and manoeurve the switch upwards.guiding the wiring through the column.
13.you will actual find there are 3 phillip head screws securing the switch to lever switch to the combination switch.

14.when putting this assembly back to together just follow these steps in reverse..
hope you find this helps you

Aug 03, 2012 | Holden VK Cars & Trucks

1 Answer

Replace fuel pump 1993 mazda 323



REMOVAL & INSTALLATION

323, Protege, 520-22 626 and MX-6 and 522-24 MX-3 Models
See Figures 1 and 2

  1. Relieve the fuel pressure and disconnect the negative battery cable.
  2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.



0900c152802612b0.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 1: Detach the fuel hoses and electrical connections from the fuel pump, then remove the attaching screws and the pump


0900c152802612b1.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 2: Exploded view of the fuel pump assembly for the 323, Protege, 520-22 626, MX-6 and 522-24 MX-3

  1. If not already done, detach the electrical connector from the fuel pump/sending unit.
  2. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.
  3. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.
  4. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.
  5. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.

To install:
  1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.
  2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.
  3. Connect the fuel supply and return lines.
  4. Install the access cover and the mounting screws.
  5. Attach the sending unit electrical connector.
  6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.
  7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.

May 08, 2012 | 1993 Mazda 323

2 Answers

Can you replace the lights behind the instrument panel? the entire right side of my dash is no longer lit up


Sure Can

Buy bulb number 161

Instrument Cluster Finish Panel

Removal and Installation

1. Remove three screws along the bottom of instrument panel steering column cover (04459). Pull on instrument panel steering column cover to unsnap the three clips across the top of the instrument panel steering column cover. Remove the lower instrument panel steering column cover.

1996fp.gif

2. Remove four screws retaining the steering column shrouds (3530) together and remove the steering column shrouds.

3. Remove the three screws retaining the bottom of the cluster instrument panel finish panel (044D70).

4. Remove two screws retaining the cluster instrument panel finish panel above the instrument cluster face.

5. Pull cluster instrument panel finish panel to unsnap one retaining clip above the LH A/C register (19893).

6. Pull cluster instrument panel finish panel to unsnap three retaining clips on the RH side vertical edge.

7. Pull cluster instrument panel finish panel away from instrument panel (04320) far enough to disconnect the wiring connector(s).

8. To install, reverse Removal procedure.

I've never done #2, and #1 refers to the panel below the steering column. To remove it completely, pull it towards the driver's seat. There may be retaining clasps on it also.

May 25, 2011 | 1996 Ford Thunderbird LX

1 Answer

How do i install a new dash for 83 mazda rx7


Instrument Panel and Pad REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. If so equipped, unfasten the inside hood release handle.
  3. Remove the steering wheel and the lower steering column cover.
  4. Remove the glove box, switch panel and console. Fig. 1: Loosen the retaining nut to unfasten the inside hood release handle 85810013.jpg
    Fig. 2: If necessary, remove the dash mounted speaker covers to access hidden instrument panel bolts 85810003.jpg
    Fig. 3: Due to space limitations, some bolts are best removed with an open end or box wrench 85810004.jpg
    Fig. 4: Other bolts are easily removed with a socket 85810005.jpg

  5. Remove the meter (gauge) hood, heater control panel mounting screws and separate the heater controls from the instrument panel frame. Remove the combination meter.
  6. Remove the air duct(s) and the steering shaft mounting bracket bolts. Allow the column to lower.
  7. Disconnect and label the meter wiring. Unfasten the mounting bolts and remove the crash pad and instrument panel. Fig. 5: Some of the instrument panel attaching bolts are hidden behind removable trim covers or plugs. Carefully pry off the cover . . . 85810006.jpg
    Fig. 6: . . . then remove the bolts with a socket 85810007.jpg
    Fig. 7: The glove box must be removed to unfasten some of the instrument panel retaining bolts 85810008.jpg
    Fig. 8: Other retaining bolts are accessible with the meter hood and combination meter removed 85810009.jpg
    To install:
  8. Position and fasten the crash pad and instrument panel, being careful to route the wiring correctly. Attach the meter wiring to its appropriate connections.
  9. Raise the steering column to its normal operating position and install the steering shaft mounting bracket bolts. Connect the air ducts.
  10. Install the combination meter. Install the heater controls into the instrument panel frame with the mounting screws. Attach the meter hood.
  11. Install the console, switch panel and glove box.
  12. Install the steering wheel column cover and steering wheel.
  13. If applicable, attach the inside hood release handle.
  14. Connect the negative battery cable.
prev.gif next.gif

Nov 05, 2010 | 1983 Mazda RX-7

1 Answer

Heater core. where is it located and how do you replace it?


Heater Core REMOVAL & INSTALLATION For the removal of the heater core, which is located inside the heater-A/C unit assembly, first remove the heater-A/C unit assembly from the vehicle as described later in this section. Once the unit has been removed, use the following procedure to extract the heater core:
  1. Place the heater-A/C unit on a suitable work surface.
  2. Locate and remove one retaining nut from the blend-air door pivot shaft.
  3. To remove the top cover from the heater-A/C case, the crank arm must be removed.
  4. Disconnect the vacuum lines from the defroster and panel mode vacuum actuators and position them out of the way.
  5. Remove the 3 heater-A/C unit cover attaching screws, fastened upward at the defroster outlet chamber.
  6. Remove the 2 heater-A/C unit cover attaching screws, fastened upward at the air inlet plenum.
  7. Remove the 11 heater-A/C unit cover attaching screws, fastened downward into the housing. Then lift the cover from the heater-A/C unit.
  8. Remove the old heater core from the case. To install:
  9. Install the new heater core into the heater-A/C unit case in the same position as the old one.
  10. Place the cover onto the case and secure in place with the 11 retaining screws.
  11. Install the 2 heater-A/C unit cover attaching screws in the air inlet plenum.
  12. Install the 3 heater-A/C unit cover attaching screws in the defroster outlet chamber.
  13. Attach the vacuum lines from the defroster and panel mode vacuum actuators to the heater-A/C unit case.
  14. Install the crank arm and the retaining nut on the blend-air door pivot shaft.
  15. Install the heater-A/C unit assembly into the vehicle.

Oct 13, 2010 | 1990 Chrysler New Yorker

2 Answers

How do I change the dash lights in my 1997 ford crown victoria? I took out all the screws but still cant get the cover off to get to the bulbs. URG!!!


REMOVAL & INSTALLATION Conventional Cluster Fig. 1: Remove the trim screw covers on the driver's and . . . 89606p41.jpg
Fig. 2: . . . passenger side of the instrument cluster 89606p42.jpg
Fig. 3: Remove the upper trim panel retaining screws 89606p43.jpg
Fig. 4: Remove the headlight switch knob 89606p44.jpg
Fig. 5: Detach the electrical connectors for the trim panel and remove it from the vehicle 89606p45.jpg
Fig. 6: Remove the instrument cluster retaining screws from either side of the cluster 89606p46.jpg
Fig. 7: Remove the transmission range indicator cable 89606p47.jpg
Fig. 8: Slide the cluster out and detach the electrical connectors and . . . 89606p48.jpg
Fig. 9: . . . . remove the instrument cluster from the vehicle 89606p49.jpg
  1. Disconnect the negative battery cable.
  2. On 1989 vehicles, disconnect the speedometer cable. On 1989 Crown Victoria and Grand Marquis, remove the headlight switch knob and shaft assembly.
  3. Remove the instrument cluster trim cover attaching screws and remove the trim cover.
  4. Except 1992-98 Grand Marquis, remove the lower steering column cover retaining screws and remove the lower cover. On 1992-98 Grand Marquis, remove the knee bolster retaining screws and remove the knee bolster.
  5. On all except 1992-98 Grand Marquis, remove the lower half of the steering column shroud.
  6. Remove the screw holding the transmission range indicator column bracket to the steering column. Detach the cable loop from the pin and cane shift lever. Remove the column bracket from the column.
  7. Remove the 4 cluster retaining screws. Disconnect the cluster feed plugs from the receptacle and remove the cluster assembly.
  8. Installation is the reverse of the removal procedure.
Electronic Cluster NOTE: The electronics within the electronic instrument cluster are not serviceable. In the event of an electronic failure, the entire instrument cluster must be replaced or returned to the manufacturer for repair.
  1. Disconnect the negative battery cable and set the parking brake.
  2. Unsnap the center moulding on the left and right sides of the instrument panel. Remove the steering column cover and column shroud.
  3. Remove the knobs from the auto dim and auto lamp switches, if equipped. Remove the 13 screws retaining the instrument panel and pull the panel out.
  4. Move the shift lever to the 1 position, if required, for easier access.
  5. Detach the electrical connectors from the warning lamp module, switch module and center panel switches, if equipped.
  6. Remove the instrument cluster carefully so as not to scratch the cluster lens. Detach the electrical connector from the front of the cluster.
  7. Disconnect the transmission range indicator assembly from the cluster by carefully bending the bottom tab down and pulling the indicator assembly forward.
  8. Pull the cluster out and detach the electrical connectors on the rear of the cluster. Remove the instrument cluster.
  9. Installation is the reverse of the removal procedure.
prev.gif next.gif

Sep 18, 2010 | Ford Crown Victoria Cars & Trucks

1 Answer

How do i change mazda 6 headlight bulb do i need to remove the whole light as its awkward to access


This is difficult give yourself a good 30 mins. I have only found one way. Bonnet up - You will need a slim torch and a stubby x headed strewdriver to remove the plastic screws that hold on the wheel arch cover. Turn wheel away to give you more room. Once this is out of the way you can see the back of the light cluster, A twist and the back cover comes off. Remove the electrical connector, locate the retaining clip (much of this is by feel) when you take out the bulb make sure you note the way it came out as the replacement must go in the same way. Do not touch the bulb glass with your fingers, use paper or gloves. By feel, re-fasten the clip then reconnect the electrics. Reposition cover and twist back on, Refasten wheel arch cover. Make sure the cover goes inside the lip of the wheel arch otherwise spray from the wheel may get in., good luck

Dec 09, 2009 | 2004 Mazda 6

2 Answers

My father is outside now trying to pop out the ignition lock to my 1996 Mazda B2300 to replace it. And a piece of it broke off inside of the terminal that the ignition goes into. What and how do we need to...


this model the colum has a split plastic shell that come apart screws are in some holes philups screwdriver or torx driver#15 plastic will come apart and u can access the ingnition switch

Jul 01, 2009 | Mazda B2300 Cars & Trucks

1 Answer

How do i replace the fuel pump in my 1993 mazda 626 2.5


1. Relieve the fuel pressure and disconnect the negative battery cable.

2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.

3. If not already done, detach the electrical connector from the fuel pump/sending unit.

4. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.

5. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.

6. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.

7. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.



To install:

1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.

2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.

3. Connect the fuel supply and return lines.

4. Install the access cover and the mounting screws.

5. Attach the sending unit electrical connector.

6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.

7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.

Jun 13, 2009 | 1993 Mazda 626

Not finding what you are looking for?
1997 Mazda 626 Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...