Question about 1997 Ford Explorer AWD

1 Answer

Left hand park light not working

Need to change the left hand side park light bulb, how to please. it is a 1997 UN model

Posted by on

  • Anonymous Mar 14, 2014

    How you change left side park light

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 744 Answers

Hi first of all check ur fuses with a good test light see if any are blown and if u had cut any wires when u took out the old stereo that would have caused the problem..

thank u
rate me!!

Posted on May 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get left hand park lights and dash lights to work.


Your left hand park light needs a new bulb. If I knew what year car I could tell you which bulb, 1156 or 1157 bulb on older cars, on newer ones ??? There are a lot of them but it is bulb.

Instrument cluster is a blown fuse in your fuse box, most likely 15 or 20 amp. Replace.

Hope this helps Mike

Mar 04, 2015 | Cars & Trucks

2 Answers

Front side marker / turn signal wiring diagram for 1997 crown vic LX. Both directionals works, but parking light on driver side dosn't. passenger side works fine . 3157 bulb and only 2 wires to socket !...


Verify:
- the bulb socket are still wired soundly on the back side
- contacts inside socket are still intact.
- wires are not frayed/broken (entire length)
- the actual bulb is good
-all ground wires are soundly connected

3cf55e8d-23c8-4483-b9ba-2225f93e3a2a.jpg

Oct 11, 2014 | 1997 Ford Crown Victoria

1 Answer

The right turn signal on my 1997 buick park avenue will not work. all other parts of this multi switch work


Does the front and rear light on the right side come on when you activate the switch ?
If a light is out the system won't flash.
If one side comes on and the other does not, the problem is usually in the turn signal switch.

Jul 03, 2012 | 1997 Buick Park Avenue

1 Answer

1997 ford contour tail lights won't work but brake lights do already changed bulbs what fuse is for parking light


There are 2 fuses,left and right, so I dont think both could be out? fuses. 33 and 35. make sure they have power on both sides of the fuse. If one side has power, its blown, if no power, the headlamp switch is bad, or bad connection. The RED/BLACK wires coming out of the headlamp switch go to those fuses. 33-35

Dec 10, 2010 | 1997 Ford Contour

1 Answer

Rear light install for 1997 jeep grand cherokee


Just changing the bulb or didya crash out the whole light and need to change the whole thing? Both are easy with the tailgate open there's two screws that screw into the light, with them out the light pulls out to the side some then straight back ( it pops out with the screws removed. once the light is away from the body the bulb scocktes can be removed by depressing the tab on the side of the scocket and turning the socket to the left. The bulb just pulls stright out and the new one is a 3157 a 3057 will work the back up light and the yellow turn signal are 3156 put in the ones you need turn em on and test that they work, There's a plug in the harness that can be disconnected and reconnected that may cause the light not to work as for changing the whole light just take out all the blub bases and the light is in your hand. A new light will come with the blub bases and bulbs all you need to do is plug in the harness and pop the light in pust it forward till the screw holes line up and install the screws and your done.

Sep 16, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Ford f-250 taillights wont work bulbs new everything else works??? 1999 model checked fuses


check the rear whip,usually right under the bumper where the left side and right side come together,un-tape everything and check the brown wire and connection,if looks green with corrosion then cut it and re-solder it and seal with insulating wire wrap or shrink wrap tube---its for the tail lights or parking lights

Jan 20, 2010 | 1999 Ford F250 Regular Cab

1 Answer

1989 Pontiac Bonneville Left hand turn signal blinks, right hand does not. The bulbs are all working on the right side, just won't flash. I cannot find the flasher but not so sure that is it since the left...


Take bulbs out and check sockets also bottom of bulbs, park lights and tail lamps. If the solder contacts on bottom of bulbs are flat replace them.

Jul 01, 2009 | 1989 Pontiac Bonneville

1 Answer

1997 chevrolet lumina


If your talking about the headlamp, open your hood, look right behind the headlamp and you will see either two or three black funny looking nuts (I think they call them "wing nuts") turn them off while holding on the headlamp, then pull headlamp out slowly, unplug the headlight bulb, grab the back of the headlight bulb, turn and pull it out. (Put a plastic bag, like a sandwich bag over your hand). DO NOT touch the headlight bulb with your hands or you will burn out the bulb. These are very sensitive bulbs and DO NOT like the oils from your skin. Set it down somewhere very safe so it will not roll or touch anything greasy or oily. Next, unplug the parking light, turn and pull out. Replacement is reversal. Hope this helped!

Sep 07, 2008 | 1997 Chevrolet Lumina

Not finding what you are looking for?
1997 Ford Explorer AWD Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...