Question about 1997 Audi A4

1 Answer

A4 1997-Front upper door hinge-same as Rear door upper hinge?

Hi team! I have Audi 1997 2.8L quattro. My question is like that: Is the front conductor door hinge upper, is the same that the rear door hinge upper too, same sode of the car?? Thank you very much!

Posted by on

  • Anonymous Mar 16, 2014

    the door is pushed to the rear it has no gap between the door and post. are the door hinges slotted and could they be loosened to adjust it

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 99 Answers

As far you mention about the front & rear hinge they are different you cant fit the front hinge in rear or the rear in the front they have differnt specification as compare to each other for much more trouble free solution do consult yout nearest autorised dealer or authorised service centre for more solution do keep in writing trouble free hazard free driving drive safe & take care untill then see you sir..!

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes front end driver's side to wobble on a 97 audi quattro A6?


tire imbalance
bent wheel
warped brake rotor
worn upper control arms
worn lower controls arms
worn CV axles
Not using hubcentric wheels or rings
worn wheel bearing
Combination of above

Jan 08, 2017 | 1997 Audi A6

1 Answer

How to remove the door handle of a 2010 audi q5 3.5 Quattro front passengers door ?


I think you have to partially remove the door trim to get to the back of the handle. I found some potentially useful references on YouTube. Search "Audi door handle removal"

Jun 17, 2015 | 2010 Audi Q5

1 Answer

2006 Audi A6 quattro low vacuum at rear tap on intake manifold


have a compression test done to determine the condition of the rings and valves.

Apr 05, 2014 | Audi A6 Cars & Trucks

1 Answer

How do get access to the top driverside door hinge


Here is the repair procedure straight from Ford manual, but it doesnt give any information about access problems, I will ask a coworker and see if he knows:

Removal and Installation
  1. NOTE: Front and rear door hinges can be removed and installed using this procedure.

    Support the front door (20124) or rear door (24630) for service using Rotunda Flexi-Work Table 156-00070 or equivalent.
  1. Mark the location of the front door upper hinge (22800) or lower door hinge on the front door or rear door and body.
  1. Remove the door hinge-to-body retaining bolts.
  1. Remove the door hinge-to-door retaining bolts. Remove front door upper hinge or lower door hinge.
  1. To install, position the front door upper hinge or lower door hinge to the front door or rear door and body. Install retaining bolts.
  1. Adjust the front door or rear door as outlined. Tighten hinge retaining screw and washer assemblies to 25-35 Nm (18-25 lb-ft) and remove the support.

Apr 19, 2011 | 1996 Mercury Grand Marquis

1 Answer

Where is the fuel filter located on my 91 Audi 90 quattro


it should be under the car in front of the rear wheel well. if not then it will be located on the firewall on the fuel line.

Feb 04, 2011 | 1991 Audi Quattro

1 Answer

Tire pressure for a 2002 Audi A4 quattro 3L with 17inch wheels. Thanks.


Look inside your driverside front door or door jam the manufacturer puts a label specifying tire information, what it displays is what to properly inflate the front and rear tires to as well as what tire size they recommend you use on your particular vehical....

Dec 10, 2010 | 2002 Audi A4

1 Answer

Bottom door hinge replacement easiest way?


Hinge, Door Removal and Installation
  1. NOTE: A second person is required if the Flexi-Work Table 156-00070 is not available.
    Support the front door (20124) using Rotunda Flexi-Work Table 156-00070 or equivalent.
  1. Mark the location of the front door upper hinge (22800) and front door lower hinge on the front door and body.
  1. Remove the front door hinge-to-body retaining bolts.
  1. Remove the front door hinge-to-door retaining bolts and remove the front door upper hinge and front door lower hinge.
  1. To install, position the front door upper hinge and front door lower hinge to the front door and body. Install the retaining bolts. Tighten to 25-35 Nm (18-26 lb-ft).
  1. Adjust the front door and front door upper hinge and front door lower hinge as outlined, and remove the support.

Jul 01, 2009 | 1995 Ford Thunderbird

2 Answers

I want a user manaul for my audi a4 1.8l quattro


Here is a manual, but you have to purchase it:

http://shopping.msn.com/prices/audi-a4-service-manual-1-8l-turbo-2-8l-including-avant-and-quattro/itemid2373553/?itemtext=itemname:audi-a4-service-manual-1-8l-turbo-2-8l-including-avant-and-quattro

Apr 14, 2009 | 2001 Audi A4

1 Answer

1990 audi quattro. how to remove the door panel?


This is great as I am doing one of these right this moment and this one has gone long since unanswered and there appears to be no solution.

For the front panel.

1. Remove the two Phillips screws front and rear at the top of the panel.
2. Remove 3 - 4mm Hex head screws in the arm rest, these are expansion fasteners so you will not be able to completely remove the screw. When you have these loose enough the arm rest will slip straight out.
3. Pull interior door handle until you can see the Phillips screw hidden near the hinge and remove.
4. Pull out door handle and carefully release cable from the handle assembly. Be careful with this clip as it can easily be bent and damaged.
5. Start at bottom of door panel and pull the panel straight out, once the bottom is free lift upward until panel comes off.

Nov 24, 2008 | 1990 Audi Quattro

Not finding what you are looking for?
1997 Audi A4 Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...