Question about 2007 Chevrolet Equinox LS New Cars

1 Answer

My shift lever has an "I" on it before the letter "D" for Drive. What is "I" for???? When do you drive in that "gear"

My gear shift indicator on my 2007 chevrolet equinox has the letter "I" on it. What is that for????

Posted by on

  • Lee Glascock May 11, 2010

    is r or below the D ?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 114 Answers

Hopes this helps:

PRNDIL

D is obviously Drive
I is Intermediate usually 4th and 3rd on a 5 Speed
L is Low usually 2nd and 1st when I is present

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my 1998 chrysler cirrus shift into gear?


I'm not familiar with YOUR Chrysler, BUT... my brother' father-in-law had a Buick [about 1998 model] that would NOT shift into any gear UNLESS the brake pedal was FULLY DEPRESSED!!!!!

I could move the shift lever into any of the indicator positions, but the transmission would not engage if my foot was not firmly on the brake pedal while selecting a gear position!

Sep 03, 2014 | 1998 Chrysler Cirrus

1 Answer

Car only starts in neutral?


I was first going to say the problem is the neutral safety switch, but based on what you said about it being stuck in drive and the shifter can be moved around, I would say the cable is broke or a connector on either end of the cable. The cable connects the shifter with the shift lever on the side of the transmission.
The shift lever is probably under the master cylinder on the driver side.

Feb 06, 2013 | 2000 Buick Century

1 Answer

Have a 97 f150 transmisson shows second gear when in drive on indicator how do i fix it


Some where and some how there is a way to adjust the gear lever indicator, try google it

Sep 16, 2012 | 1997 Ford F150 Regular Cab

2 Answers

My 1993 Gmc Sierra 2500 automatic first gear shifts hard also from park to drive others gears are smooth i have overdrive


The gear shift lever indicators tell you what gear you have an automatic transmission in on your vehicle. The shift solenoid tells the transmission when to shift gears and what gear to shift into. Newer model automatic transmissions have electronic shift solenoids that are activated and change gears based on the speed the vehicle is traveling. Troubleshooting either one of these transmission components is relatively easy if you know a little about automobile mechanics. With the right tools, you can determine whether the transmission shift solenoid is having a problem. Gear shift indicator problems can be determined simply by moving the gears into their designated position.
Transmission Shift Solenoid
  • 1 Raise each corner of the vehicle up with the car jack and place jack stands under the frame. Make sure the car is raised high enough so you can work under the car freely.
  • 2 Slide the drain pan under the transmission fluid drain plug. Remove the drain plug with a ratchet and socket, and let all the fluid drain out of the transmission. Remove the transmission pan bolts with a ratchet and socket. Pull the pan away from the bottom of the transmission, revealing the transmission shift solenoid.
  • 3 Wipe off the shift solenoid with a shop towel. Disconnect one of the two plugs that attaches to the shift solenoid. Turn the knob on the volt meter to the ohms setting, so resistance can be measured. Set the volt meter on 200.
  • 4 Take the black lead of the volt meter and touch the negative battery terminal wire. Take the red lead of volt meter and slide the tip into the terminal plug you just disconnected from the shift solenoid. Look at the reading you get on the digital display of your volt meter. Determine if the reading is between 12 and 25. Readings below 12 or above 25 tell you that the shift solenoid is not working. Reattach the plug to the shift solenoid and pull the second plug attached to the solenoid. Perform the same procedures on this plug wire. Replace the transmission shift solenoid after determining it is bad.
Gear Shift Indicator
  • 1 Move the gear shift into the desired gear. Look at the gear labels and the arrow, or other indicator, to see if the gear shift indicator lines up with the selected gear.
  • 2 Move the gear lever to another gear and look to see if the indicator lines up with the selected gear. Misalignment of the arrow will tell you if there is a problem. Moving the gear shift to "neutral" but having the indicator show the transmission is in "drive" tells you the gear shift indicator is not working properly.
  • 3 Try each gear position to determine how much misalignment is in the indicator. Slide under the car and check for a loose gear shift cable. Check all the gear shift cable connections to ensure they are all tight and are not missing. Tighten any loose gear shift cable clamps or bolts. Replace the gear shift cable if you find that this is causing the misalignment with the gear shift indicator.

Feb 02, 2012 | 1993 GMC Sierra

1 Answer

97 grande cherokee 4.0 straight 6....dropped automatic trans and replaced the torque converter and seal that was leaking. put back together and shifts and bogs down in reverse but drive hesitates until...


I'd venture to say your linkage is out of adjustment - don't mess with the bands if the transmission worked before. Move the shift lever all the way to the lowest gear detent (farthest away from Park), then tighten the linkage cable adjustment until the shifter on the transmission is right at its stop on the transmission. The shift indicator needle should be centered on the letter. (If the transmission is now working properly and the needle is still off, you can adjust the needle inside the shifter housing by sliding its clip on the bracket attached to the shift lever. I didn't say it would be easy to get at it...)

Nov 14, 2011 | 1997 Jeep Grand Cherokee

1 Answer

My 97 ford Taurus shift ( gear ) indicator strip ( little red line ) is not correctly lined up over the letter for the gear it is in when in park it points to R when in D it points to 1st gear how can...


If you remove the plastic around the steering colum you will see a little cable that hooks to the park lever, there is an adjustment ion this cable

Jul 31, 2011 | 1997 Ford Taurus

1 Answer

I have a 2004 GMC Envoy XT with 4wd. I started to


sounds like you have a broken shifter cable.Go under the rig and shift the transmision manually.Put on the parking brake and on the drivers side of the trany should be the lever to move.Look for the broken part while you are there it will also help to locate the shift lever on the trany.

Jul 31, 2010 | 2004 GMC Envoy

1 Answer

Have 1999 Ford Expedition xlt. My gear indicator is messed up, When I am in drive, it shows 2, when i am in park it shows reverse.


This comes straight from the repair manual..
1. Remove the upper steering column cover.
2. Put the shifter in drive position.
3. Move the shift lever clockwise until it stops (all the way to first gear position, then move it back two detent positions to the Drive position.
4. Hang an a weight (something) with 8 pounds of weight on the lever to hold it in place.
5. Center the indicator neddle in the middle of drive position.
6. Rotate the thumbwheel on the bottom of the steering column to remove all slack from the indicator cable.
7 Install the upper steering column cover.

Jan 16, 2010 | 1999 Ford Expedition

1 Answer

Tahoe is stuck in drive. The shifter moves freely but the indicator stays on drive and tahoe would go in park or reverse.


On my 93 S-10 Blazer there is a small cable that goes from the shift lever to the gear indicator. As you shft gears it pulls the indicator with it. that cable may have come off or broken.

Mar 19, 2009 | 1996 Chevrolet Tahoe

Not finding what you are looking for?
2007 Chevrolet Equinox LS New Cars Logo

Related Topics:

1,010 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...