Question about 2003 Chevrolet Malibu

1 Answer

The car does not power on desk after a crash,

We had a crash in a Chevy Malibu 2003, the crash was in front rigth corner, and after that the tailligths and the power windows works, but nothing in the desk is powering on.

We suppose that it could be because the knock sensor is activated, but we can not locate it.

Please do you can help me to locate it?

Best Regards

Karlo

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 99 Answers

See for electriacl problem such as  1.see weather the bulb are ok or fused in deck pannel 2. see for fuses that are related to perticular system 3.like you told about the knock sensor most of them are located behind the bumper assembly, near bumper mounting chassis,bracket, the best thing for a hazard free trouble free thing you can visit the nearest authorised service station or workshop they will surely help you sir till then have happy motoring, & drive safely see you soon Sir...!

Posted on May 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i know when my spark plugs and wires are bad


have to take one by one together out and start a car .or with the proper totool

Sep 03, 2012 | 2003 Chevrolet Malibu

1 Answer

Head light relay for chevy malibu 2003


check the fuse panel under the dash in front of the driver seat.

May 13, 2012 | 2003 Chevrolet Malibu

1 Answer

2003 chevy malibu gas gauge always on empty, replaced the fuel pump


Need to replace the sensor inside the gas tank. I have a 2008 Malibu with the same problem. It was a faulty fuel gauge sensor.

Jan 31, 2012 | 2003 Chevrolet Malibu

1 Answer

2006 Chevy Malibu power mirror fuse


On the right front of the center console, remove the panel directly next to the floor. It is marked with a fuse symbol. It has a velcro pad behind the "O" marking near the front. Just pull on the end with the "O" marking. once the panel is removed, fuses are identified on the back. Power Mirror = 2a fuse in the front upper of the panel.

Jan 17, 2012 | 2006 Chevrolet Malibu

1 Answer

Replace Front Shockabsorbers on 2003 chevy Malibu


It has struts,and they need a strut compressor tool to do this,and a front end alignment.

Apr 10, 2010 | 2003 Chevrolet Malibu

1 Answer

Finding where to connect the canister on a chevy malibu 2003


on the low side of the ac system, that is the large lins from the compressor.

Oct 24, 2009 | 2003 Chevrolet Malibu

1 Answer

Horn not working chevy malibu


Check the fuse it may need replacing.

Apr 23, 2009 | 2003 Chevrolet Malibu

2 Answers

Drivers door panel removal


The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
3. pry door handle plug by using small flat bladed tool
4.remove door trim handle mounting screws
5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
6. remove door panel.
KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
Hope this helps you out.

Mar 23, 2009 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2003 Chevrolet Malibu Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...