Question about 2003 Pontiac Montana

1 Answer

Light brake doesn't work-light on ant-lock brake

Driver side-brake light does't work,i change light bulb,but still doesn't work,panel in side light .ant-lock brake.can you help me.pontiac montana2003.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

You need a rear left circuit board. they come with new lights, and is generaly inexpensive20-30 dollars

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ELECTRICAL PROBLEM


take it to a body shop

Nov 27, 2013 | 2000 Dodge Stratus

1 Answer

Weird tail light problem


HI Matt,
Your issue sounds like a fault, most likely in the rear lights. Current is feeding from the brake light circuit, into the running light circuit. The most common causes are a bulb filament broken and touching the running light circuit, and loss of ground.
observe the rear lights closely and you should get a clue as to which light is failing....but if not, just pick one....
I would run a temporary ground and test again, if no results, pull the brake light bulbs...
Transient current is often difficult to wrap your mind around, until you understand what can happen.
Doc

Mar 08, 2012 | 2006 Jeep Grand Cherokee

1 Answer

My drivers side brake light doesn't work on my 1992 volvo 240


Check for power at the bulb socket then make sure it has a good ground.

Feb 24, 2012 | 1992 Volvo 240

1 Answer

Left tail light only blinks with main light switch turned off. With main light switch on it doesn't work but front left turn signal works in both instances but fast with main switch on.


change the flasher unit, located behind the fuse panel on the drivers side foot kick panel , then check the bulb of the bad light, with a Meter,, you could have a bulb filament flopping around and it looks to be good , also check that the base of the bulb is clean and has good grounding

Jul 29, 2011 | 1999 Chevrolet S-10 Pickup

1 Answer

Hell i just bought a chevy cavlier and my back break light is out...the light its self is on...its just the break light when pressed...


you don`t say if its both or just one brake light out.you say the light itself is on but not if you mean tail light or what.the tail lights use a different filament in the bulb than the signal light which is the same filament that the brake light uses.if the signal light work on the rear then the bulbs are good,if just one side works then the bulb is no good on the side that doesn`t work.if the signal lights work but neither brake light works then you need to check the fuses in the fuse panel under the dash on the drivers side.if the fuses are good then it will be either a bad wire at the brake switch or a bad brake light switch,this is located on the brake pedal lever under the dash.

Mar 18, 2011 | 1999 Chevrolet Cavalier

1 Answer

Brale light doesn't work-driver side


could be a corroded socket or a broken wire on the socket. not sure. if you have a tester check to see if you are getting voltage at the socket. if you are the lamp may not be contacting the pins good. some have springs in the socket and they get dirty and wont move like they should.

May 24, 2009 | 2003 Pontiac Montana

1 Answer

Tail light won't work but brake light will


Check 10amp fuses #9 and #23 in the fuse block on outbord end of left side of dash panel. With driver door open you should be able to see the small access panel on end of dash.

Mar 05, 2009 | 2002 Jeep Liberty

1 Answer

03 pt ONLY driver brake light out


Ok you can't tell anyone, but I changed the wrong bulb. Only two choices and I changed the good bulb. ugh. all fixed now..

Jan 22, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2003 Pontiac Montana Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...