Question about 2000 GMC New Sierra 1500

2 Answers

New fuel pump and still no start

Replaced the fuel pump and still no start also went thru fuses and there all good wat could be problem now

Posted by on

  • dnfmower3 May 24, 2009

    i chech all fuses and relay are good even hear the pump working in tank still no start

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

Did you check the fuel pump relay? it's located in the junction box under the hood. YOU CAN take the relay from the a/c clutch to check it. this should solve it.often times this get's weak with time and when it goes bad you wont get fuel.

Posted on May 24, 2009

  • KEN LaPOINT
    KEN LaPOINT May 24, 2009

    i'll do some more checking and see what i can find for you..
    K


×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,004 Answers

Still look at the fuel system which comprises of the fuel injector and plugs. also check your starter.

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 dodge neon 2.0 sohc itll turn over but want start we got it to start with starter fluid but had to hold the throttle down to keep it runnin


Check if your pump is working. Check the fuel pressure. If you have fuel pressure at the engine''s fuel rail, check if your injectors are pulsing. Sounds like gas is not getting to the engine or not getting into the cylinders.

Dec 22, 2012 | 1998 Dodge Neon

1 Answer

1999 chevy 1500 cranks but won't start. Have good spark.


Check the fuel pressure. If it has none the pump went bad but then you can have a pump that is pumping but at to low of a preesure to get thru the injectors. To verify a fuel issue pour just a bit of fuel into the intake and crank the vehicle. If it starts you need a new fuel pump.

Mar 17, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

7 months ago. I replaced fuel pump for my 98 chevy s 10. The other day. Went for a drive. Went to go start it after shutting it off. It wants to turn over. But know sound of fuel pump. An it wouldn't...


check the wiring and replace the pum with a good brand or from the dealer
1997 astro van the original fuel pump last 12 years the auto parts pump 11 months
there is a fuse and a relay also signal comes from the computer
good luck

Nov 23, 2010 | 1998 Chevrolet S-10 Pickup

3 Answers

No power to fuel pump car was running fine just quit repalced fuel pump no power to pump, car will start when spraying starting fluid in to intake, is there a fuse ? also replaced ECM, fuel filter,...


Check for 12 volts power at the fuel pump harness. If no power is going to the pump, check the fuel pump relay. Also, check the fuel pump inertia switch. Ford usually has it on either inside left or right rear trunk fenders.

Apr 09, 2010 | 1987 Ford Taurus

1 Answer

There is no fuel going thru the fuel line to the motor


start with fuses and relay to fuel pump if good check fuel pump if not working no pressure replace if good check fuel filter

Oct 14, 2009 | 2004 Volkswagen Jetta

1 Answer

1999 plymouth neon fuses


Start by checking for a wire shorting to ground if that checks good you will need to go thru the circuit and check the amp draw at each component, fuel pump,ignition coil,ect. until you find the bad part

Jul 25, 2009 | 1999 Plymouth Neon

2 Answers

Fuel issue i belive


check fuel pressure on fuel rail to ensure good fuel pressure according to specs for van. also check fuel pressure regulator look for fuel coming out of the vaccum line. if it is then replace it

Jun 28, 2009 | 1999 Chevrolet Express

1 Answer

Wont start, new fuel pump


replace fuse and relay.also check oil pressure switch.it controls fuel pump also. check fuel pump wires and fuel injector fuse .if all is good pcm could be faulty it controls fuel pump on .command circuit

May 31, 2009 | 1996 Chevrolet Blazer

1 Answer

Chev blazer 1996 fuelpump will damage why.?


let me see if i understand your question. You had a fuel pump installed. went with aftermarket pump instead of replacing whole module? before when you started it would start first try and now with new pump it takes two or three times? This happens a lot with aftermarket pumps as the check valve does not hold fuel in line as good as gm pump. so after sitting overnight you are having to pump the fuel back up thru lines.

Nov 18, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...