Question about 2002 Chevrolet TrailBlazer

1 Answer

What goes wrong , get hot two cylinders stop firing

Ran hot changed therostat now engine is hesitant computer says two cylinders are not firing '

Posted by on

  • gladdeng May 23, 2009

    what do you mean rach other or other sides i dont understand what you mean.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

You fouled some plugs or ran hot to much and head gasket are cylinders next to rach other or other sides let me know we can do this tell fix ya bout me ok

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost power then came to stop then backfired.restarts for only few seconds then backfires at intake


Did you change the distributor? Could have put it back in the wrong direction or forward too much on the timing notch or put too plug wires on the wrong post..... It definitely sounds like a timing issue and the back fire sounds like the plug is firing the cylinder on the intake stroke.... if you keep at it you will blow your muffler off or start a fire. Look up the firing sequence for your year and make of car to be sure

Apr 27, 2015 | Cars & Trucks

1 Answer

Broken timing belt damage engine 93


You mean it will crank but not start ? Do you have normal compression, spark and fuel pressure ?
If the timing belt broke you won't have compression on all cylinders.

Feb 11, 2014 | Nissan Pathfinder Cars & Trucks

1 Answer

Truck won't start when hot


Check fuel pressure with a gauge

Sounds like the pump is going bad & stops
mechanically or electrically

You don't need codes to have cylinder misfires,bad
egr valve or O2 Sensors with over 100,000 miles

Nov 20, 2012 | Cars & Trucks

1 Answer

Have 1994 toy. truck with v6, when choke goes off the engine misses


Hey 94 TOY...

When did the problem start? Before you changed the wires and plugs? Or did it start, AFTER you changed the wires and plugs? Did the problem remain the same BEFORE & AFTER you made the changes?

1 - If the TOY ran fair to Okay before you did the work, then you may have done something wrong when you made the cahages. Check for correct plugs and firing order. Check for cross wiring. With engine runing pull one plug wire off each plug one at a time. Each pulled plug wire will slow down the engine. When you pull a plug wire that doesn't react and does not make any change ON or OFF that cylinder Plug.
Then that cylinder is not firing.

2 - Check for spark at that wire. If you do-not have Spark there, But the other wires do... the wire going to that cylinder is BAD.

3 - If you have the correct firing order and spark at all cylinders then the cylinder that did-not change the speed of engine has a compresstion problem. Bad valves, Piston or rings are bad... Major engine work and Major repair bill for the repair job.... GOOD LUCK....

Oct 15, 2012 | 1994 Toyota Pickup

1 Answer

The car hesitates when idling or stopped at light/ stop sign, and the rpm drops to zero then goes back up.


The battery was a red herring - it would not have anything to do with the problem.
Faulty spark plugs could cause a miss but probably not make the engine stall.
What you described is a classic example of a faulty idle air control valve or a dirty throttle body. The computer controls idle speed by regulating how much air enters the intake. It opens the control valve to raise idle speed when necessary.
I would check the control valve and the throttle body.

Sep 27, 2012 | 2003 Nissan Altima

2 Answers

Why does p0304 appear when engine warms up on 2002 c240


Seems to be a misfire code, you could have a partially clogged injector. You can have them tested at a local car shop.

Feb 09, 2012 | Cars & Trucks

1 Answer

05 freestar sputtering and bogs when excellerating in rainy wet days. I get a miss firing on cylinder one reading from computer. I 've changed all 6 sparkplugs and wires. Also replaced mass air flow...


A P0301 code means that the the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #1.

Symptoms may include:
* the engine may be harder to start
* the engine may stumble / stumble, and/or hesitate
* other symptoms may also be present

Causes: A code P0301 may mean that one or more of the following has happened:
* Faulty spark plug or wire
* Faulty coil (pack)
* Faulty oxygen sensor(s)
* Faulty fuel injector
* Burned exhaust valve
* Faulty catalytic converter(s)
* Running out of fuel
* Poor compression
* Defective computer

Possible Solutions:
* If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
* If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Test it and send us news.

Mar 11, 2011 | Ford Freestar Cars & Trucks

1 Answer

How do i change the thermostat in my 96 blazer?


take bracket off throd body then take therostat housen off to change therostat then put back together fill with coolent run with cap off it water goes down then fill on up put cap on drive and watch gage make shur it dont run hot

Jan 31, 2011 | 1996 Chevrolet Blazer

2 Answers

Car Hesitation


Check IAC motor - Idle Air Control - and replace. 

Apr 24, 2009 | 1992 Mitsubishi Diamante

Not finding what you are looking for?
2002 Chevrolet TrailBlazer Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...