Question about 2005 Peugeot 405

1 Answer

Fob wont work the locks

I have changed the batteries in my key for a peugeot expert 1.9d and now the remote locking wont work, how do i reset the key?

Posted by on

  • Anonymous Mar 29, 2014

    do you think it maybe a imobiliser fault?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Peugeot Expert
  • 205 Answers

I have done this procedure for my peugeot 307, but you can give it a try for your Pug expert and let me know if it works.
Disconnect the battery for 5 minutes then after connecting the battery perform the following steps
1. Turn the Ignition switch to the ON position using your key.
2. Press the LOCK button for 10 seconds. It will set your ECU in programming mode.
3. Remove the key and wait for 10 seconds.
4. Press the buttons on the key repetedly for operation (lock und unlock doors) to synchronise the key signals.
5. Again turn the ignition on and start the engine.
6. Turn the ignition OFF

If fails in step 4, then disconnect the battery and reconnect it and wait about 10 minutes to check the remote. Some new ecu units synchronises itselfs if you disconnect the battery while in programiing mode.

Posted on Jun 13, 2009

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

HeLpINHaRrY
  • 210 Answers

SOURCE: i need to reset my peugeot 406 key fob

check the obvious first beacuse this doesnt really seem llike a problem with the key , if the key needs resetting you will not be able to start the car with that key. has the battery in the key fob 
been low or been replaced recently


 , make sure all the doors are properly shut includind the bootlid , as most modern cars cenral locking systems does the lock unlock if a door is only partially shut,
resetting a key is not a diy job . the key needs to go to a locksmith or peugeot dealer . 

let us know how you get on 
and please rate

Posted on May 19, 2009

emissionwiz
  • 75817 Answers

SOURCE: Reset remote central locking key fob for 2003 Kia Sportage

U can't do it, it must go to the dealer for hook up to a special electronic scannner to reset this system.

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Peugeot saying plip battery spent, where can I get new battery from


The warning is regarding the battery in you key fob remote, used for central remote locking and alarming your car and registering the key to the car. It takes a small flat battery like a watch battery: CR1620-Lithium-Battery. You may have to reprogramme it after changing the battery though. Purchased from Peugeot or any good electrical store.

Dec 31, 2015 | Peugeot Cars & Trucks

2 Answers

How do i reprogram my key on peugeot 307 hdi 2001


Many cars have a different process to enabling passive systems, some require turn the key on and off 3 times then hold it in the on position while holding down the remote, or you may hear a chirp to start the calibration process, the safest way of course to marry the unit to the vehicle is to scoot down to the Peugeot dealer and get them to do the program, it may cost, but they also have to make sure everything works correctly too, so they will stand by the service they provide you. hope this helps, happy holidays.

Nov 29, 2014 | 2001 Peugeot 307

1 Answer

How to program key on peugeot 307 hdi 2001


put key in icnition turn on but don"t start engine,press door lock and hold for a few seconds,then turn off,key fob should now work,if not try again,also make sure you have the correct battery in key fob.

Nov 29, 2014 | 2005 Peugeot 307 HDi

2 Answers

Remote locking stopped working on both keys of my 407 peugeot still locks with key ok is there any thing i can check


If you take your keys to a Peugeot dealer they can test your keys to find out if it is the keys or not. That way you aren't tearing into your car to fix something that is not broken.

Jun 30, 2011 | Peugeot 405 Cars & Trucks

1 Answer

Key fob on my 54 plate peugeot expert van will not work after replacing the battery,no visible led on fob


most cars need a reset when being worked on even as simple as changeing the battery find fuse box look for fuse Labled (hazard or HZD) remove for 15.sec. then put back in it should reset the ECU

Apr 04, 2010 | 2005 Peugeot 405

1 Answer

Car doors wont lock with remote


Sounds like the rod that goes from the lock to the key came off. There is usually a little plastic clip that holds it together and they break and you get what you are experiencing. You have to take the inside panel off of the door to get inside it.

Jul 05, 2017 | Peugeot 406 Cars & Trucks

2 Answers

Key fob wont work on my Peugeot Expert


Does the battery need changing on the key fob?
you can check by using you'r mobile phone cam & pointing the key fob (ultra violet bulb) at the lens when pressing the button, you should see the light flashing on the key fob looking through the camera, you can use any camera, most of them will see the light as it's out of our sight range but cameras pick it up.
If not then unscrew the key fob & split it carefully (use an old credit card not a knife or screwdriver) & change the battery.
If the fob work's then the problem is with the receiver, usually up by the rear view mirror.
Hope this help's !

Sep 21, 2009 | 2005 Peugeot 405

3 Answers

I need to reset my peugeot 406 key fob


Had same trouble with my 406, fixing no problem, with new battery in fob, insert into ignition, turn key, BUT DO NOT START ENGINE, hold button for about 10 seconds release button and remove key from ignition, then try and see if doors lock on remote, if not try again, had to do this a couple of times, and it worked, sorry to say that now my key fob button has completely fell apart, through ware and tare

May 19, 2009 | 2005 Peugeot 405

1 Answer

Peugeot Expert 2005 locking problems


open your key pad again, and you will see hte little connector that the battery touches, take a small screw driver or a butter knife and gently pull the tab up some, it is common for them to get mashed down from pushing on the key pad.....

Oct 17, 2008 | 1997 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

1,187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...