Question about 1997 Chevrolet Cavalier

1 Answer

Daylight lamps dont work

Changed my spidometer,checked the sensors too,cheked the daytime running lights sensor in front of radiator,changed the lightbulbs too

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Is car a 5 speed? parking brake switch cuts out daytime running lights when pulled up.

Posted on May 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can anyone tell me where the drl module is located on a 2000 Chevy Blazer


Behind the lower kick panel on the passenger's side good luck colin

Jun 24, 2017 | Cars & Trucks

1 Answer

2003 Chev Malibu. Radio inop with key in on position, auto systems not working, I.e. daytime running lamps, auto lock and drivers unlock, fuel and temp gauges not working.


Have you had vehicle check for DTC'S diagnostic trouble codes . Check fuse's an relays , find wiring diagrams to see what controls these systems ?
Radio/Battery fuse , fuse G 10 amp located in the right instrument panel fuse box . Do you know where this ?
Fuse Block - Right IP - On the right side of the instrument panel
An there is one on the other end of the instrument panel ,driver side .
Fuse Block - Left IP- On the left side of the instrument panel The fuel an temp . gauges not working is probably the step motors inside instrument cluster . GM had problem with this 03 to 06 .
How to repair GM Instrument Cluster Speedometer Gauge Stepper

Daytime Running Lamps (DRL)
The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal it will either turn on the daytime running lights (DRL) or the headlights. Any function or condition that turns on the headlights will cancel the daytime running lamps operation. With the headlight switch in the OFF position, the headlights will either be turned ON or OFF, after an approximate 30 second delay depending on whether daylight or low light conditions are sensed. The HTR A/C IGN fuse in the underhood junction block supplies ignition positive voltage to the daytime running lamp (DRL) relay coil circuit. The DRL relay switch contacts are connected to the low beam circuit. When the headlamp switch is placed in the OFF position, the BCM will either turn on or off the daytime running lamps, depending on whether daylight or low light conditions are sensed. The BCM energizes the DRL relay, closing the switch contacts and grounding the low beam circuit. Ground is provided at G101. The DRL illuminate the low beam headlights at a reduced intensity. The DRL will operate when the ignition switch is in the ON position, the gear selector is not in the PARK position and the parking brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate.
DRL operation in Manual Transmission equipped vehicles will occur when the ignition switch is in the ON position, and the parking brake is released. - check fuse's an relay first.
Door Lock System Components
The power door lock system consists of the following components:
?€¢
Driver door lock switch


?€¢
Front Passenger door lock switch


?€¢
Body Control Module (BCM)


?€¢
Relays: Driver Door Unlock--if equipped, Door Unlock, and Door Lock


?€¢
Door Lock fuse 15A


May 25, 2016 | Cars & Trucks

2 Answers

How to turn off the daytime running lights on my 2005 chevy equinox


you have to change daytime running lights module.For now remove cable from battery +

Mar 19, 2016 | Cars & Trucks

1 Answer

I need clarification on 2003 Chev Malibu DRL problems:


That piece you think is a ceramic DRL module is a resistor , When in DRL mode voltage to the low beam headlamps circuit goes through that resistor dimming the headlamps from low beam to daytime running lamps . It sounds to me like you need a new resistor ,but without doing some electrical testing it could be a lot of things . The DRL relay in the under hood fuse box could have a problem , could be the BCM - body control module , the ambient light sensor etc... Here is how daytime running lamps work .
Daytime Running Lamps (DRL)
The ambient light sensor is a light sensitive transistor that varies its voltage signal to the body control module (BCM) in response to changes to the outside (ambient) light level. When the BCM receives this signal it will either turn on the daytime running lights (DRL) or the headlights. Any function or condition that turns on the headlights will cancel the daytime running lamps operation. With the headlight switch in the OFF position, the headlights will either be turned ON or OFF, after an approximate 30 second delay depending on whether daylight or low light conditions are sensed. The HTR A/C IGN fuse in the underhood junction block supplies ignition positive voltage to the daytime running lamp (DRL) relay coil circuit. The DRL relay switch contacts are connected to the low beam circuit. When the headlamp switch is placed in the OFF position, the BCM will either turn on or off the daytime running lamps, depending on whether daylight or low light conditions are sensed. The BCM energizes the DRL relay, closing the switch contacts and grounding the low beam circuit. Ground is provided at G101. The DRL illuminate the low beam headlights at a reduced intensity. The DRL will operate when the ignition switch is in the ON position, the gear selector is not in the PARK position and the parking brake is released. When these conditions have been met and the ambient light sensor indicates daytime conditions, the DRL will illuminate.

Feb 25, 2016 | Cars & Trucks

1 Answer

Where is the DRL relay located?


There is no DRL relay , has a lamp control module .
The daytime running lamps (DRL) activate under the following conditions:
?€¢
The ignition switch is in the RUN position.


?€¢
The ambient light sensor indicates daylight.


?€¢
The vehicle is not in the PARK position.

When the above conditions are met, the lamp control module (LCM) supplies battery positive voltage (B+) to the low beam headlamps through CKT 589 (GRY), the DRL resistor, and CKT 12 (TAN). The DRL resistor reduces the voltage supplied by the LCM. The low beam headlamps light at a reduced intensity. The DRL disable if the vehicle is placed in the PARK position. When the ambient light sensor indicates darkness, the low beam headlamps automatically switch from a reduced intensity to a regular intensity.
Lamp Control Module (LCM)
In the center of the IP, below the center heater outlets

Nov 17, 2015 | 1998 Oldsmobile 88

1 Answer

2006 grand Prix the drl stay on and will not go off if they do go off the come back on with nobody around the car keeps running the battery dead ????? Ready to burn it


Daytime Running Lamps (DRL)
The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 volts depending on outside lighting conditions. The body control module (BCM) provides a 5-volt reference signal to the ambient light sensor. The ambient light sensor is permanently grounded at ground G202. The body control module (BCM) monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either daytime running lights (DRL) or automatic lamp control (ALC) when the headlamp switch is in the AUTO position. In daylight conditions the BCM will command the low beam headlamps ON at reduced intensityy. Any function or condition that turns on the headlamps will cancel DRL operation.
There could be a DTC stored in the BCM pointing to a problem !
DTC B2645 Ambient Light Circuit

2

Turn the headlamp switch to the OFF position.
Do the low and high beam headlamps remain OFF?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3

3

Remove the appropriate low or high relay.
Do the lamps turn OFF?
Go to Step 5
Go to Step 4

there could

Oct 26, 2015 | Cars & Trucks

2 Answers

Auto headlights don't come on 2008 Chevy Trailblazer LT. What's the problem?


Maybe bad sensor as seen on the following video



And see how he troubleshoot it

Apr 15, 2015 | Cars & Trucks

1 Answer

1998 Lumina lights don't work at night!The lights work during the day but not at night. Does anyone know how to fix it?


Theres a sensor in the middle of the dash by the front windshield that detects sunlight and triggers the automatic headlights. The main headlights and daytime running lights might be on a different circuit, in which case they daytime running lamps would turn off at night and the main headlights would turn on, indicating the main headlights arent working and the daytime running lamps are working as intended.

I would check all the fuses related to headlights, check the bulbs and check the switch, then last the light sensor on the dash.

Jan 08, 2014 | 1998 Chevrolet Lumina

1 Answer

The headlights dont work at night but do in daylight,is their a sensor


yea its called a daytime running light sensor. if you dont have mechanical skills you should bring it to a shop it can get pretty complicated.

Jan 05, 2011 | 2001 Toyota Celica

2 Answers

My headlights come on when i start the engine in auto even if it is daylight


Is this a new issue? Daytime running lights are pretty standard might have the switch turned on for full time is all check owners manual on how to change.

Apr 17, 2010 | 2006 Ford F-150

Not finding what you are looking for?
1997 Chevrolet Cavalier Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...