Question about 1999 Dodge Intrepid

1 Answer

Air conditioning compressor is disconnected and waiting for a rebuilt on , today at a stop light car was idleing and water gauge went to hot and some smoke came out, let car cool and got it home it wa

1999 dodge intrepid, my air conditioning comprressor went bad, mechanic disconnected it, looking for a rebuilt one, today at a stop light my water gague went to hot and some smoke came out of my engine help

Posted by on

  • thebitts1 May 26, 2009

    It was disconnected about 3 weeks ago he is waiting to get a rebuilt compressor. I will be calling him tomorrow

  • Mike Butler
    Mike Butler May 11, 2010

    DO you know exactly what it was that he disconnected? Have you called him?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

You need to get coolant level checked first thing, and topped up as necessary to start with, then have to see what goes on with the temperature from there. Don't let it get all the way over to hot again, if you can help it. That can be costly. If at all possible, pull over & shut it off, but I suggest having that looked at before you go anywhere.

Posted on May 26, 2009

  • Mike Butler
    Mike Butler May 26, 2009

    Have oil checked as well.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My air conditioning stops working while I'm driving.


This is odd...will it do the same thing if you just let the car idle for an extended period of time or just when driving? The reason I ask is that the compressor has an electro magnet centrifugal clutch that makes sure that the compressor always spins at the same rpm regardless of your engines rpm's ...if that makes sense. If the clutch has failed, you will be forcing freon through or across the reed valve gasket since it's a closed system as the pressure will have no where else to go. If it works fine at idle you can either rebuild the compressor or get another depending on your skill level. Hope this helps

Jun 08, 2014 | 1998 Jeep Cherokee

1 Answer

Air conditioning


Was the compressor running when you hooked up the gauge ?

Jul 17, 2013 | 1999 Dodge Intrepid

1 Answer

How do i put water in my radiator?


you need to replace thermostat and radiator cap.look under hood around engine compartment.look for a radiator cap near radiator,add 50/50 antifreeze and water to coolant system to bring up boiling point.pure water will cause engine run hotter because water evaporate away,remove radiator pour coolant in the radiator until coolant stop dropping in the radiator now some vechicle pour coolant in the coolant overflow jug,pour coolant until coolant level stop dropping and the coolant level stay at cold full mark.start engie let idle few minutes, watch coolant level in radiator if coolant start dropping add more coolant, when coolant level stop dropping put radiator cap back on let engine idle until both top radaitor hose and bottom coolant hose get warm turn off engine wait until it get cool then take a large rag slightly open radiator just a litle at a time to keep from getting scaled.once radiator remove add more coolant if low,put radiator cap back on start the engine let it idle watch the temp gauge if temperature gauge going hot zone stop engine wait until cool then add more coolant,keep doing this until engine stop overheating going into hot zone and coolant level stop dropping,make the coolant overflow jug coolant level stay at full cold mark, dont let jug run empty if so air will get in the coolant system causing engine to overheat.

Jul 22, 2012 | 2000 Plymouth Breeze

1 Answer

2003 Lincoln LS hot air while stopped cold while driving


Hello
Based on what you have said and my 30 years a Ford dealer tech I believe you have a slightly low AC system refrigerant charge due to a small leak at the AC compressor or the AC line connections. I would have a shop hook up a set of gauges to monitor the pressures at idle and see just how low it is. DO NOT ADD UNTIL YOU KNOW HOW MUCH IS NEEDED, YOU CAN LOCK UP THE COMPRESSOR.

Jul 09, 2012 | 2003 Lincoln LS

2 Answers

The radiator was emptied out and i want to add antifreeze and water? there are 2 areas that say antifreeze goes here?


  • One is the radiator and the other is an overflow tank. Sometimes anti freeze will back pressure a bit and need somewhere to go and other times the antifreeze gets low in the radiator. That is the purpose of the radiator.
  • Put the antifreeze in the radiator fist and then add to the reservoir. Pay attention to the cold/hot level fill on the overfill tank.
  • You need to find out where all that antifreeze went to if the radiator was empth. Pull the dipstick and look for a chocolate milk look on the oil. This would be a head gasket or a cracked head.
  • Otherwise keep an eye out for a leak and repair it soon.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Jun 15, 2011 | Ford F-250 Cars & Trucks

1 Answer

How do i replace the water thmostat 99 6 cylider


WELL YOU NEED TO DRAIN COOLANT LEVEL BELOW THERMOSTAT LEVEL.YOU HAVE TO DISCONNECT MAF SENSOR LOOSEN AIRDUCT 2 LARGE CLAMPS LOOSEN REMOVE 4 SCREWS TO AIR FILTER COVER LIFT UP REMOVE COVER. THEN REMOVE AIR FILTER AND HOUSING, FIRST DISCONNECT MAF SENSOR.YOU HAVE TO DISCONNECT THROTTLE CABLE AND SHIFT CABLE.YOU HAVE TO DISCONNECT REMOVE THROTTLE BODY COOLANT HOSES DISCONNECT IDLE SPEED CONTROL VALVE CONNECTOR AND DISCONNECT TPS SENSOR CONNECTOR. THEN REMOVE THROTTLE BODY ASSEMBLY. YOU NEED TO BUY NEW THROTTLE BODY COOLANT HOSES AND NEW THROTTLE BODY GASKET FOLLOW TOP COOLANT HOSE TO ENGINE BLOCK.NOW YOU SEE CAN AND REMOVE THE THERMOSTAT HOUSING REPLACE THE THERMOSTAT.BESURE TO HAVE EXTRA COOLANT ON HAND.BLEED COOLANT SYSTEM WHEN DONE.TO BLEED COOLANT SYSTEM REMOVE RADIATOR CAP ON OVERFLOW JUG.THEN OPEN BLEED SCREW ON THE WATER PUMP BYPASS HOSE PIPE JUST A LITTLE.POUR COOLANT IN THE OVERFLOW JUG UNTIL LEVEL STOP DROPPING.STOP AT COLD MARK ON JUG.CLOSE BLEEDER SCREW ON WATER PUMP BYPASS HOSE PIPE.CRANK VECHICLE CHECK FOR LEAKS. START UP ENGINE LET IDLE FEW MINUTES THEN CHECK COOLANT LEVEL ADD MORE UNTIL UNTIL LEVEL STOP DROPPING.PUT RADIATOR CAP BACK ON OVERFLOW RESERVOIR. LET ENGINE IDLE WATCH COOLANT TEMPERATURE GAUGE.WHEN GAUGE START CLIMBING. TURN OFF ENGINE WAIT FEW MINUTES TAKE A LARGE RAG OPEN RADIATOR JUST A LITTLE YOU HEAR HISS NOISE.WHEN PRESSURE STABILIZE DONT GET SCALDED BECAREFUL.OPEN CAP LITTLE MORE.IF COOLANT PRESSURE STILL BOILS OUT WAIT 20 MINUTES ADD MORE COOLANT TO RADIATOR OVER FLOW WHEN COOLANT LEVEL STOP DROPPING.PUT RADIATOR CAP BACK ON START VECHICLE UP LET IDLE UNTIL THERMOSTAT OPEN. THEN FEEL TOP RADIATOR HOSE FEELS HOT THERMOSTAT OPEN WATCH TEMPERATURE GAUGE.IF GAUGE TEMP START CLIMBING TURN OFF ENGINE WAIT A WHILE.CHECK AND ADD MORE COOLANT.WHEN THE ENGINE CAN IDLE TEMP GAUGE STOP CLIMBING YOU HAVE BLEED COOLANT SYSTEM.KEEP CHECK ON COOLANT LEVEL.

Dec 29, 2010 | 1999 Oldsmobile Alero

1 Answer

Check engine light and air conditioning


I Think I Can,
You Might Be Blending Hot Air With A/C Cold Air And Being 100Deg Outside, Your Getting
Really Warm/Hot Air Inside,
Your System Is Charged w/Freon, The A/C Compressor Is On/Engaged,
There Are 2-Aluminum Tubes Comming From The Compressor, [In & Out Pressure]
1 Tube Will Goto The Front Condensor, Infront Of The Raidator,
The OTHER Tube Comming Out Of The Condensor Will Goto A Dryer,
[Aluminum Looking Cylinder] Bigger Aluminum Tube[s]
The DRYER Will Then Feed Freon To Your Evap-Coil Inside Your Car [Cool-Air],

OK, The Dryer Tube's, 1 Of Them Should Be Cool/Cold, Locate That Tube, A Thermometer
wrapped w/Alum-Foil Around This Tube,
A/C ON, [A/C Compressor Engaged]
If You See The Temp Is Around 50-55 Degree's Or Lower, You Have Cold Air,
If Not, Above That, Low Freon, Or A restriction In The System. [Comes Later]
You Have Cold Air, You Have Warm/Hot Air Inside Car/Vents?
You Are Blending Hot Air w/Cold A/C Air, Problem Is With Heater-A/C Blend Box
Under Dash. There Are 2 Seperate Coils Under The Dash,
1 For Winter/Heat, Other [Evaporator Coil] For A/C, There Is a Diverter/Flapper door
That, For A/C, Closes Off The Heater Coil, Or It Should, To Prevent Engine Hot Water/Heat
From Blending w/ Cold A/C Air.
Most Are Controlled By A Diaphram, Vaccum Controlled From The Heater-A/C Controller
On The Dash.
If You Can Select From Defrost Vent To Dash and Floor Vents, Most Likely you Have
a Bad Diaphram That Controls The Heat-A/C Flapper Valve.
Most Time's You Can Open/Remove The Glove Box And See It,
A Temp Fix, For Cold Air, Would Be Remove The Vaccum Line From That Diaphram,
And Plug It, Pull The Metal Rod Back On The Diaphram with a Needle Nose Pliers,
If you Get Cold Air, Take a Ty-Wrap, Around The Shaft, Secure It, To Keep The
Vent In The Cold Air Position.
Then You Will Have To Get A New Diaphram Installed, Most Time's, Can Be Done
Through The Glove Box Opening.

Now About The Restriction In A System,
You Will Need A Set Of A/C Gauges, Car-Off, A/C Off, Connect Gauges.
IMPORTANT: The Gauges Before Connecting Should Show Pressure In Them [Freon]
Either The Gauges Have Freon In Them Or They Are In A Vaccum.
Otherwise They Have Air In Them, Air w/Freon=BAD Things.
OK, Gauges Show Pressure, Gauges Not Connected To Anything,
Open Up Both Knob's, Blue [Low-Side], Red [High-Side]
Gauges Needles will Move/Equal Out pressure,
BOTH Gauges Should Read Same Pressure, If Not, Quick Fix, Remove Gauge Glass
Covers, Need Little Screwdriver, If Gauges Off By ie: 4 psig,
Adjsut Low-Side [Blue] By 2psig and other, by 2psig, [Split The Difference]
So Now Both Gauges Read IDENTICAL Pressure.
Close Both Valves, Blue & Red
Connect Gauges To Car, Car=Off, A-C=Off
You Will See Pressure On Both Gauges,
Low Side Shuld Be Around 75-95psig, Depending on Outside Temp, If Around 60 or less
need freon.
OK, BOTH Gauges Should Show SAME Pressure reading,
If There Is MORE Than a 4psig Difference Between Them,
There Is A restriction In The System,
a Plugged "Orfice Tube" [Filter] Part Cost $3.00, Servicing The Filter, Alot More.
Restriction Causing Might Be , Moisture/Air in System [Improper Vaccum On System During Last Repairs], Compressor Breaking Down [Metal, Black Goo Bul-up]

Hope You Get Some Cold Air Soon.

Jun 25, 2009 | 1999 Mazda Millenia

1 Answer

Air conditioning gets hot when stopped , fine as long as driving


The refrigerant may be low, also could be that the a/c compressor is going out. Have it checked

May 09, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1999 Dodge Intrepid Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...