Question about 2007 BMW X3 3.0si SAV

1 Answer

DCS indicator always on...can not turn it off with dcs dash switch

After i install the car audio in my BMW X3 2005....why the dcs indicator always on and not turn off?? i have been try to push the dcs button and it's still on....how can i fix that problem?? thank you in advance...

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

What did you in install/ remove to install radio - there are many things that could have been disturbed to cause this light.
unfortunately the only correct way to clear the fault or find the problem would be to take it to a dealer.
If you were inder the dash, checked the wires to the steering angle sensor.

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bmw 316ti compact dcs light stays on


See the information attached, and use the common sense, and logically. God bless you
The CD/DVD, has 2 switch one for open and another for to close. the swicth can be dust, dirty, or defective.Test the power switch for dirty, dust, or defective.
The unity can be dissasembly, and make troubleshooting, diagnose.
I can recommend you to go the repair shop. When the switch is NOT open they NOT send the signal to the SYSCON(CPU) or microcontroller.
God bless you
7_25_2012_7_29_53_pm.gif

Jul 25, 2012 | 2004 BMW 316ti Compact

1 Answer

Dcs fault light comes on


Several possible causes = inspect in the order listed

1 Brakes need service/checking
2 ABS wheel sensor faulty, check condition and cable connections
3 ABS/DCS unit faulty

A good independant garage should be able to check the above quickly and cheaply, if you cannot.

Hope this helps - good luck.

Aug 31, 2009 | 2000 Jaguar S-Type

1 Answer

The dash light indicating that door is ajar, but is not. dome lights won't go off and can't get into my trunk.


Hi ,
the most likely cause of this is a faulty micro-switch in the doorlocking mechanism on the drivers door,as for the trunk ,if you can`t open it via the remote control or the button inside the car,then it will be a fault in the boot locking solenoid or a blown fuse.It is possible that the 2 are related and that there is a fault in the central locking control module,but for this you will need to take it to a Jaguar trained garage.
Darren DCS

Jul 06, 2009 | 2004 Jaguar X-Type

1 Answer

2004 BMW 328i bluetooth


Are you sure the blutooth is active in your car? Contact the local dealer and have them run a "DCS" and confirm the car is fitted with Blutooth. Then go to www.bmwusa.com and check that your phone is apporved to work with the car. Provided nothing is wrong with the car you can then follow the instructions below.
  1. make sure your phone's bluetooth is "always on"
  2. get your phone all the way to the "search screen" and stop
  3. press the "menu button on the radio
  4. press the button below the "phone" in the menu screen of the radio.
  5. press search on your phone to locate the car.
  6. after the phone locates the car press yes to "bond"
  7. the phone/car will now ask for a password, enter 1111 and press enter or ok.
Ifyour passwrd does not work you will have to go to the dealer to get the correct one or you can locate the TCU in the driver's rear inner panel in the trunk and get the number off the unit. It will say "PK XXX"

Jun 01, 2009 | 1999 BMW 328 Series

1 Answer

My dcs light has come on


needs to be replaced buy a dealer and must be programmed at the dealer

Apr 08, 2009 | 2001 BMW 5 Series

1 Answer

Dcs and abs light staying on


car is sensing a problem with the stability control system (DSC) or the antilock brake system (ABS). usually an ABS problem will turn off the DSC, so DSC may be ok, just ABS needs a look at.

since its an '08 model, it should still be covered by the BMW warranty provided you live in the USA. take it in and have them fix it. not safe driving with both systems deactivated.

Feb 23, 2009 | 2008 BMW 528i Sedan

Not finding what you are looking for?
2007 BMW X3 3.0si SAV Logo

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...