Question about 1995 Jeep Wrangler

1 Answer

Transmission or clutch

Jeep is very hard to grt into gear. Grinding when going into reverse especially

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI. your pressure plate is done. you will need to replace this part asap.

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gears really hard to shift 1990 toyota 4runner


pressure and clutch plate (clutch set) need to be inspected and probably replaced. be prepared for a transmission repair as well if the problem has been going on for months.

Mar 21, 2013 | Toyota 4Runner Cars & Trucks

2 Answers

Manual transmission.at times the car will not shift into first gear.once the car starts to roll it then shifts when forced.Followed by a loud grinding sound.


The "grinding" sound leads me to believe that your clutch is not completely disengaging. Does it also do it in Reverse? First gear and reverse gear is not syncronized. Sometimes it helps to go to reverse, then bring it back to first to keep from having to force the thing into gear. Forcing it will bend the shifting fork inside the transmission. If it has been forced a few times, you may allready have a bent fork. Anyway, if it is also "grinding" going into Reverse, it is time for a clutch.

Jan 27, 2011 | 1998 Ford Escort

1 Answer

Grind when putting into reverse, hard to gp into 1st gear


When it is hard to go into gear or grinding when going into gear is an indication of worn synchronizers. The only solution is to take it to a mechanic that specializes in transmissions and having the synchronizers replaced. Sometimes a weak clutch and clutch plate can make it hard to go into the lower gears, you may want to examine these first.

Aug 06, 2010 | 1995 Chevrolet C1500

1 Answer

Tranny trouble??


TRANSMISSION FLUIDS CAN BE CAUSED BY ONLY A COUPLE OF THINGS. MOST COMMON BEING A WORN OR BROKEN SEAL. THE TRANSMISSION SEALS ON MOST CARS ARE MADE FROM RUBBER OR METAL. BEING IN ALL KIND OF EXTREME TEMPS FOR YEARS ON END NOT TO MENTION THE PARTS MOVING AROUND THEM WILL EVENTUALLY CAUSE LEAKS. ALSO FAULTY INSTALLATION (OF A SEAL) CAN ALSO CAUSE A LEAK TO HAPPEN. THE ONLY OTHER THING THAT CAN CAUSE A LEAK TO MY KNOWLEGE WOULD BE IF YOU BOTTOMED OUT A CAR LOW ENOUGH THAT IT CAUSES DAMAGE TO THE TRANS CASE OR PAN. One cause of grinding when shifting into reverse is improper adjustment of the clutch linkage. If the adjustment is correct when the clutch is depressed the gears should stop turning and eliminate the grinding. Make sure there is some free play in the linkage when the clutch is not depressed. Most manual transmissions do not have a sychronized reverse gear. When you try to go into reverse from neutral, the transmission countershaft (which is linked to the pilot shaft) is still turning. The main shaft (which is linked to the tailshaft) is not turning. Therefore, since there is no sychronizer (or clutch brake like on a heavy truck tranny) the sliding cluctch gear (splined to the main shaft) grinds against the main shaft gear (floating over the main shaft but meshing its respecive countershaft gear through the reverse idler). The slider's function is to lock the main shaft gear to the main shaft thereby transmitting power to the rear wheels in the desired gear ratio (depending on which main shaft gear is locked to the main shaft). The way to cure this is to select a forward gear to stop the transmission and then go to reverse, all the while holding the clutch down. If it still won't go into gear you can either slip the clutch ever so slightly to "bump" the gears while gently pushing the stick into reverse (not too hard!! you can bend or break forks!! OUCH!!) or go into neutral, let the clutch all the way out, go into a forward gear and then reverse.

Feb 26, 2010 | 1999 GMC Suburban

2 Answers

Jeep 1997 Wrangler. 6 Cyl Manual Having real trouble getting into gear, especially from stop. Grinding noise when backing up. Easier on gears 3/4/5 once moving. Can it be something as simple as clutch...


easy #1 check is what gear is hard when running turn car off it goes in easy probably just a clutch adj. or problem. gone unfixed can destroy the trans synchronizers

Aug 19, 2009 | 1997 Jeep Wrangler

1 Answer

1995 jeep cherokee standard transmission will not go into reverse


If you can select another gear with no grinding and clutch feels normal likely either the reverse synchro is worn out or an internal shift fork is worn...either way, trans needs to come out and be opened up to check. Can you put it into reverse with the engine off?

Jun 27, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Jeep Wrangler 1998 straight drive has difficult times going into reverse gear. I don't drive it every day,usually towing it behind my RV. It seems better when I drive it more,but is still difficult to...


if this is a 5 speed manual transmission...all you need to do before putting your jeep into reverese is puting it into first gear and then shifting it to reverse to avoid any grinding or problems shifting into reverse...this isn't a problem just a poor jeep design by not installing an extra gear to eliminate this grinding or shifting problem

Mar 26, 2009 | 1998 Jeep Wrangler

1 Answer

Transmission or Clutch problem?


Jeep #1: Sounds like a shift linkage problem. Possibly synchro forks are sliding back and forth on shift rails and are out of adjustment. This is internal and cannot readily be fixed without trans removal as far as I know. Hydraulic clutch system is non-adjustable. A new clutch should last at least 70K so, unless it was installed improperly, it should be OK. Check hydraulics for leaks & bleed. Clutch should "catch" about two inches off floor (not too low or not too near top of travel)
Jeep#2: Has a synchro or other internal gear problem... Symptoms are similar but gringing and clicking noises indicate worn or broken internal components!
Good luck to both!

Dec 21, 2008 | 1989 Jeep Wrangler

1 Answer

Reverse gear has grinding noise...?


Have them flush the fluid out under warranty and put in new fluid, and have them bleed the clutch lines in case air is getting in there. Audi and VW claim lifetime transmission fluid but it's BS - I've changed relatively low mile fluid from these cars and it was horrendous. It's possible that the fluid itself is causing trouble, but it's more likely that it is a synchro problem. If it was a clutch issue, you should have problems with more than just reverse gear - a clutch simply engages and disengages the engine and transmission, regardless of which gear it is. The problem (if not fixed by fluid) is in the transmission, and being under warranty, don't accept another "suggestion" like they're giving you. Changing your clutch isn't gonna do it.

Aug 12, 2008 | 2004 Volkswagen GTI

Not finding what you are looking for?
1995 Jeep Wrangler Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...