Question about 1999 Suzuki Esteem

1 Answer

The precedure on how to replace cv boots

Precedure for replacing cv outer boots

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 46 Answers

The wheel has to come off, then the axle, Then it slips on like a glove after you apply grease to certain parts....goto ur local Autozone or car parts store for a book on you vehicle.

You can cut off the old one but you can't put the new one back on like that because the whole thing spins while the car moves. The boot has to be perfectly centered, and a cut boot will spin out of control.

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace outer cv boot on alfa 156


Remove tire, remove brake caliper, and hang on suspension with a tie, remove lower suspensin from lower A-Arm, then with a "Breaker Bar" or Impact Gun Remove the nut in the center of your rotor, and you should be able to remove the axle from the hub. The old CV boot you can just cut off, and after a good clean, reinstall the new boot (I recommend you add some CV Grease as long as it's exposed to lubricate the joint), then slide new boot on.

Sep 24, 2014 | 2004 Alfa Romeo 156

1 Answer

On a 2003 hummer h3, if the outer cv boot is damaged, do both inner and outer need to be replaced?


  • Boots only need replaced when they have been negated and are leaking grease. However, the time effort and money to replace just one boot when the other is right there might bite you if the other boot needs replaced in the near future. However, if upon inspection the boot is not torn, worn and the knuckle still performs well you do not need to replace that boot.

  • Hope this helps.

Nov 17, 2011 | Cars & Trucks

1 Answer

How to replace the front outer boot


The outer CV-joint boot can be serviced or replaced by removing the inner CV-joint. Click this link below for replacing instructions:--- http://repairhelpcenter.blogspot.com/2011/10/how-to-replace-front-drive-axle-cv.html ----------- This will help.Thanks.Helpmech.

Oct 17, 2011 | 2003 Chevrolet Tracker

1 Answer

When makeing a left turn clicking.


this is the sign of a failing outer CV joint in the drive shaft. look under car at driveshaft. the rubber boot around CV joint is probably torn. This allows lube to fling out and water to come in, contaminating the CV joint. Replace the entire drive shaft instead of replacing only the outer CV joint.

Nov 11, 2010 | 1994 Plymouth Voyager

2 Answers

Cv joint but the plastic thang that go around it


One would have to remove the half shaft to service the cv joint properly.

CV-Joints Overhaul Check the CV-boot for wear tccs7030.jpg

Removing the outer band from the CV-boot tccs7031.jpg

Removing the inner band from the CV-boot tccs7032.jpg

Removing the CV-boot from the joint housing tccs7033.jpg

Clean the CV-joint housing prior to removing boot tccs7034.jpg

Removing the CV-joint housing assembly tccs7035.jpg

Removing the CV-joint tccs7036.jpg

Inspecting the CV-joint housing tccs7037.jpg

Removing the CV-joint outer snapring tccs7038.jpg

Checking the CV-joint snapring for wear tccs7039.jpg

CV-joint snapring (typical) tccs7040.jpg

Removing the CV-joint assembly tccs7041.jpg

Removing the CV-joint inner snapring tccs7042.jpg

Installing the CV-joint assembly (typical) tccs7043.jpg

prev.gif next.gif

Oct 08, 2010 | 2004 Oldsmobile Alero

3 Answers

When replacing a outer C.V joint boot , do you


you can replace just the outter but you may want to replace the whole axle alot easier

Jan 17, 2010 | 1993 Ford Festiva

1 Answer

How do I replace cv boot on a buick park ave


The boot you need to replace is call OUTER CV BOOT.

The quickest way to inspect is to drive it in low speed (UNDER 10 mph) tight left and right turns.

If you hear clicking sound then the CV shaft is bad.

It's also depending on how long the CV boot been crack.

===
If you decide to go ahead on the job then please observe safety and use jack stands to fully support the front end.

Remove wheel,cotter pin,retainer cap and larger axle nut.

Make alignments markings on the strut tower and steering mount so your front end will able to put back to alignment.

You will need an able body to do the following.

Remove the large lower strut bolts and swing the strut off the CV.

DO NOT ROCK THE CAR!!!

Clean off the outer CV.

Install boot,grease and the two bands.

Line up the strut and steering yoke marks

repack bearings,lock nut,cap,cotter pin,wheel.


Drive the car in low speed for 1 miles with tight turns.

Do a quick inspection to make sure the CV boot is sitting perfectly on the CV.

















Nov 16, 2009 | 1990 Buick Electra

1 Answer

Cv outer boot


Normal proceedure is to remove the entire cv axle and replace it as a whole unit. It's a lot less messy and cost-effective. The hub nut must be removed along with the brake caliper and caliper mount. Good luck. Be safe

Apr 25, 2009 | 1997 Honda CR-V

1 Answer

Replacing outer cv boot


go get a univeral boot at the store, cut the old one off with a knife, and use pliers to remove the band, and put the new ones on.

Nov 26, 2008 | 1989 Toyota Camry

Not finding what you are looking for?
1999 Suzuki Esteem Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...