Question about 1999 Oldsmobile Cutlass

1 Answer

How to replace gas sending unit on 99 olds cutlass

How do i replace gas sending unit on 99 olds cutlass

Posted by on

  • Richard Scordino May 11, 2010

    Pretty sure pump and sending unit aren't available separately on those. Its an electric pump inside the gas tank.

  • Roberta Smith
    Roberta Smith May 11, 2010

    gas sending unit ? you mean the fuel pump or for the gas gauge ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

First disconnect and remove the battery.
Then, remove gas cap to release pressure. Than remove fuel lines and drain gas into suitable container. Next, loosen the bolts (you can use a tranny jack or have someone else help hold tank and lower it down.
Now you will want to use a BRASS punch. (do NOT use metal or it will cause a spark)
Use brass punch and hammer and loosen nut on tank counter-clockwise to loosen sending unit.
Once nut is loose, pull out sending unit and unplug the wire harness.

Reverse procedure to reinstall

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The gas gauge doesn't give me the correct reading on how much fuel is in my tank.


that old of a car it would be best to replace the fuel pump and the sending unit at the same time in the gas tank. please be safe and good luck..

Oct 31, 2012 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Gas Gage always reads empty how to fix


This problem is caused by a defective gas gauge fuel level sending unit inside the gas tank. You will need to remove the gas tank and replace the sending unit for the gauge.

Mar 28, 2012 | 1999 Oldsmobile Cutlass

1 Answer

99 olds cutlass blower motor resistor


remove glove box to get better access to the blower motor. resistor is located beside the blower fan motor. with glove box removed, then you will not have to stand on your head doing the job, good-day!

Jan 29, 2012 | 1999 Oldsmobile Cutlass

2 Answers

How to replace a blower motor on a 99 oldsmobile cutlass


remove lower right dash insulator panal from beneath glove box. slide bcm aside to get to blower. remove the three screws holding the blower motor, pull blower and fan straight out. remove fan from old blower if replacing with a new motor. good-luck!!

Jul 17, 2010 | 1999 Oldsmobile Cutlass

1 Answer

Fuel gauge reads empty


this is caused by a defective fuel gauge sending unit, this sending unit is part of the fuel pump assembly and located inside the gas tank, the tank must be removed to access the part for replacement.

Feb 24, 2010 | 1998 Oldsmobile Cutlass

2 Answers

My 88 Oldsmobile Cutlass Ciera is running rich and


The Oxygen sensor is very suspect. it is easy to damage on install, even with the correct tool.

Put the old one back in and test the car...

Jan 31, 2010 | 1990 Oldsmobile Cutlass Ciera

1 Answer

I have an 1983 olds cutlass and the guage cluster is not working properly the oil temp and gas is not readind but the tach speedometer and battery is what could be the problem


Worn out gauges would be the first guess. The next would be the oil pressure sensor....

The gas gauge could have problems from a bad float in the gas tank or the wires to the sending unit are badly deteriorated.

Dec 01, 2009 | 1983 Oldsmobile Cutlass Supreme

1 Answer

Gas gauge basically shows either mostly full or empty


sending unit in tank needs to be replced, drop down tank and replce

Jul 01, 2009 | 1999 Oldsmobile Cutlass

1 Answer

Fuel guage


sounds like a bad ground on the sending unit. hope ths helps mike

Jun 16, 2009 | 1999 Oldsmobile Cutlass

1 Answer

Gas gauge quit working


sounds like ur fuel sending unit

Mar 24, 2009 | 1997 Oldsmobile Cutlass

Not finding what you are looking for?
1999 Oldsmobile Cutlass Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...