Question about 2002 Audi TT

2 Answers

Indicators not flashing on Audi TT

Hazard lights work, but indicator lights light up but don't flash. Is it the same relay for indicators as hazards? Also any ideas where flasher relay is located?

Posted by on

  • merta May 26, 2009

    Hi,my emergency light has no problem. But,turn lights are not blinking,just stay on.And also no tic-tac sound is coming from interior of the car when i move the turn light stick.How can i replace this part?And where can i find?Is this flasher behind the radio?Where is it located? I have 2001 audi tt quattro.

  • Anonymous Apr 01, 2014

    letf side front and rear flicker ligt not workoing but when i switch on the hazards its working

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

I believe the audi uses two relays for the turn signals and hazzard lights so it would appear the turn relay has failed. it should be located under the dash near the steer column.... seems to me me they have some shielding under the dash so it may be hard to get to.

Posted on May 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 43 Answers

Hazard light switch fails a lot on Audis and VWs.  It is located above the radio.  It is the big red button with the triangle on it.  To removed and replace you need to remove the radio.  Note special audi radio tools require to remove radio.  Once the radio is out there is a black cover above where radio was at.  This cover pulls out.  Now you can access the Hazard lite switch.  I would install new switch and test before reassembling.  

Posted on May 28, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 88 Answers

SOURCE: I have a 2002 audi tt, the indicators are not working but the hazard lights are still working

check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94mazda 323 glx when I indicate left all right all indicators go I have replaced relays and the whole indicator assembly on steering rack


check that he hazard button has not been pressed as some mazdas use a direction indicator to flash and the hazard just connects all 4 lights to flash together

Jan 29, 2017 | 1994 Mazda 323

1 Answer

Problem: A co-worker has a 1999 Audi A6 Quattro. Her directionals stopped working and she's had to resort to manually moving the switch arm (the hazards work fine, though). Someone on the internet...


i think her problem is the hazard light switch this is how they go when they go wrong the indicators stop working ,their is no magic relay or seting dash lights --- not on such an old car ,the hazards work but no indicators ,they all use the same flasher unit but its all wired through teh hazard light switch ,anyway shes a female and they never use indicators anyway ,only hazards for triple parking outside the hairdresser

Dec 30, 2010 | 1999 Audi A6

1 Answer

Wipers, Brake light, heater and flashers have all


hazard relay should be the same as the turn indicators. They are separated with diodes that are in line with the wireing!

Dec 09, 2009 | 1985 Jaguar XJ6

1 Answer

I have a 2002 audi tt, the indicators are not working but the hazard lights are still working


check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse

May 20, 2009 | 2002 Audi TT

1 Answer

My indicators on my audi tt have stopped working


The turn signal actuator is behind the hazard light. You have to remove the radio and the switch will be above the radio area behind the hazard light.

Mar 29, 2009 | 2000 Audi TT

2 Answers

Indicators do not work Although al lamps light when locking Car


Hazard warning light switch fault.
The hazard light warning button in the middle of your dash is actually a relay that often fails, causing this problem. New switch required.

Jan 12, 2009 | 2000 Audi TT

2 Answers

Hazard Lights working. Indicators will not operate/flash


The Hazard and turn signals share the same relay module located in the dashboard behind the hazard switch. Remove the trim by prying from the sides (Either side of the Cup holder drawer and Card drawer). Pry the hazard switch assembly out from the dashboard. The relay is part of the hazard switch assembly.

Unclip the wiring terminal from the relay. replace with appropriate relay. Part costs under $50.00 delivered from Import Parts Specialists.

Nov 02, 2008 | 2003 Audi A6

3 Answers

HAZARD LIGHTS ON BUT NOT FLASHING, INDICATORS NOT WORKING. IF REMOVE HAZARD FUSE, INDICATORS FLASH AT HIGH RATE. (INTERMITTANT FAULT)


HI,
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)

Oct 29, 2008 | 2002 Audi A6

1 Answer

Flashing Unit for Indicators Replacement


Most likely it's the hazard switch - the relay for the hazards and the turn signals is built into it. When they start to die, you will see erratic behavior with the turn signals and/or hazards, and eventually they'll both fail completely. Replace your hazard switch on the dash and you'll be good to go.

Aug 31, 2008 | 2000 Audi TT

Not finding what you are looking for?
2002 Audi TT Logo

3,652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14333 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...