Question about 1994 Ford F150 Styleside Supercab

1 Answer

I need to replace the front left headlight on my truck. How do I do that when there is a screw on the side that I can't get to? And, I need to put freon in it. I was told that was easy to do. Is t

I need to replace the front left headlight on my 1994 Ford F150. How do I do that when there is a screw on the side that I can't get to?. And, I need to put freon in it. I was told that was easy to do. Is that true and how do you do that? I look foward to your help with these issues.

Posted by on

  • Roberta Smith
    Roberta Smith May 11, 2010

    sounds like two questions there.... are you trying to replace the headlight.... and you could add freon to the a/c but you should have it pressure tested first.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Do you need to replace the bulb or the complete headlight assembly? If it ust the bulb it has a group of wires about 4-6 follow those to a round plastic knod like nut turn it off lefty loosy righty tighty and pull it out the bulb is in the connector. when rplaceing the bulb be sure not to touch it with your bare hane as it will overheat from the oils in your fingers and burn out right away. I use a paper towel to hold it.

Posted on Jun 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Replace Headlight Bulb on 2005 Prius?


Remove fender well trim ( a few screws)
Remove front bumper COVER (not the bumper- the plastic cover)
About 14 screws. Mostly on the underside, get a creeper, and a few
on the top.

Remove the (left or right side) Headlight assembly ( a couple more screws).
One assembly contains the headlight, turn signal and running light. Unplug
the electrical connector from the assembly. All bulbs remove from the back
of the headlight assembly. Headlight is held in place by bail wire, smaller
bulbs are 1/4 turn.

Oct 20, 2016 | 2005 Toyota Prius

2 Answers

How do u adjust headlghts on 1991 gmc seirre


adjustment is on the top of the light and the side.

Jun 22, 2014 | 2003 GMC Sonoma Extended Cab

1 Answer

How to replace nissan murano 2011 front driver side turn light


Lift hood, remove grill plastic screws on top, jack car left hand side, remove corner screw on end of bumper, undo lower splash shield screws, slide bumper away from car {about 4 inches}, remove,top bolts on headlight and lift out, the is a locating slot that you will need to manipulate it from, assembly is the reversal. good luck.

Oct 20, 2013 | 2007 Nissan Murano SE

1 Answer

Installed new headlamps but they point to the ground directly in front of the vehicle - how do I adjust them up to the proper level


I just did this today..After you put the headlight back together there are two other small adjustment screws on the left and right side of that little window on top of the headlight...they are just smaller versions of the torx screws you loosened to get the headlight out...one will control the up and down adjustment and the other controls the left and right....I pointed my lights at the wall and just slowly adjusted the screws until they were both even...

Nov 30, 2010 | 1997 Plymouth Breeze

2 Answers

How do you adjust headlights??


The best way to do it is to park your car in front on a garage door, a building or put a piece of plywood in front. Whichever you use, park you car at least 10 feet away; so you can tell if you are going up, down or in the middle when adjusting.
  1. Remove the four screws that secure the headlight trim bezel to the grille.
  2. Remove the headlight trim bezel.
  3. Turn the headlight high beams on.
  4. Adjust the headlights. Use the adjustment screws located along the outboard side and the inboard lower corner of the headlight bucket. Adjust the headlights until the beams are centered directly on the wall.
  5. Replace the headlight trim bezel.

Nov 15, 2010 | 1995 Ford Escort

2 Answers

How do you replace the front turn signal on a 2005 Buick Terraza?


Changing front, right turn signal on 2005 Buick Terraza: Open hood; when facing the front of vehicle, the right turn signal is on the passenger side (left). The headlight assembly needs to be removed to easily reach the turn signal. On my vehicle, there is a 10 mm screw on the left side. Remove it. There is L-shaped pin on the right side of the headlight assembly. Swing the pin counter-clockwise (to the left). Pull the pin straight up to remove. The headlight assembly is now loose, but there is a pin snapped in a socket on the back of the assembly that still holds the assembly. Pull the headlight assembly hard and straight to the front of the vehicle. When it snaps loose, the assembly is now held just by the rubber gasket surrounding the assembly. You need to gently work the right side of the gasket out of the grill cowling. The assembly should pull straight out. The wires are long enough to lay the headlight assembly in the engine compartment. Finally, the turn signal is now accessible. Twist the light holder counter-clockwise and pull out the light holder. Change the bulb. Do not punch your man-card for credit until you have successfully reinstalled the headlight assembly. It goes back in a little easier the second time. Once you have put the L-pin in place, the screw back, and successfully tested the lights, you can now punch your man-card.

I give the mechanical engineers and designers a D-minus instead of an F only because I was successful on the first try. No light bulb on anything commonly used by people should be this hard to figure out.

Sep 07, 2010 | 2005 Buick Terraza

1 Answer

Need to change left front turn single whole ***. come out?


  1. Go to the front of the car and open the hood. Locate the two screws that mount the headlight assembly to the front of the vehicle. The screws are on top of the assembly at both ends. Use a Phillips head screwdriver to remove the screws. Pull the headlight assembly straight off of the Intrepid.
  2. Locate the turn signal electrical connector at the outer side of the headlight assembly. There is a thick wire coming out of it. Turn the electrical bulb socket counterclockwise to take it out of the headlight assembly.
  3. Pull the turn signal bulb straight out of the electrical socket.
  4. Push in a new turn signal bulb. Reinstall the electrical socket with the new bulb in it to the headlight assembly. Turn the socket clockwise until it is tight. Push the headlight assembly back in place on the car and use and screwdriver to put the mounting screws back in.

Nov 18, 2009 | 2002 Dodge Intrepid

1 Answer

How to replace the entire left side headlight assembly?


to replace : start by raising the hood, un screwing the turn signal and popping it out, next remove the front bumper, this makes everything so much easier, then locate and remove all the nuts and bolts attaching the headlight assembly. fairly simple, just time consuming, good luck and i hope this helps

Jun 01, 2009 | 1998 Toyota Corolla

2 Answers

88 Honda Accord left front turn signal assembly


*The Turn signal on the Side of the car next to the headlight*
1. Open the retractable headlights.
2. Remove the plastic shroud around the headlight: two screws in front and one on each side.
3. Look to the outside of the headlight and you will see a single screw in a small plastic cover on the front inside edge of the signal light assembly. The headlight prevents you from getting at the screw straight-on. I broke it loose with an offset phillips screwdriver, and then backed it out with a regular phillips.
4. Remove the plastic cover, and you will see two screws. Remove them.
5. Now you can pull the turn signal assembly forward and out.
6. To remove the bulb holders from the assembly, twist counterclockwise and pull out.
7. Pull straight outward to remove the bulbs. To assemble, follow the steps in reverse. Note that there are two plastic rods on the back end of the turn signal assembly that you will insert into two holes in the channel of the fender

*The turn signal in the bumper*
1. You will need a phillips head And Flat head screw driver, right below the turn signal there is a panel that you can pop out, (or its allready gone, Looks like a Fog light can go in there.)
2. once u find that, (Pretty easy to find) Look directly up in there., there is styrofoam up there and u will also notice a little hole,
3. Stick the Phillips head screw driver in that hole and turn it counter clockwize, The screw will not fall out,
4.once it feels like the screw is loose put the flat head in between the turn signal lense and bumper, the side where you unscrewed it and SLOWLY pry it out,
4. once out, just twist the plug and replace light bulb
to replace just reverse instructions

Jun 29, 2008 | 1988 Honda Accord 4 Door

3 Answers

Low side for air condition


its behind the front grill left side i had to remove 4 plastic screws on top to get at it the lower screws look hard to remove so i left them in place and gently pulled the grill away to attach the sealer

May 28, 2008 | 2002 Suzuki XL-7

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...