Question about 1996 Isuzu Trooper

1 Answer

C/v axel replacement

I know i need to replace the c/v axel in my 96 trooper,need to know if i can tackle the job it difficult?

Posted by on



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

You can do it. time consuming as with any repair at long as you got repair manual & proper tools.if ur not sure go to put in ur info .then you can view step by step instructions with pix under repair info.good luck!

Posted on May 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need to replace alternator on 96 Isuzu trooper. CCalled auto zone they asked if it was a 60 or 75 amp alternator how do I know which I have ?

The information you need will be stamped on the old alternator! If you are doing the replacement yourself then you will have to take it out anyway! As long as auto zone have both.....take it out and make sure then purchase the new one!

Jan 03, 2015 | 1996 Isuzu Trooper

1 Answer

How to fixe a noise on the rear truck axel?

Probably a problem with pinion shaft endplay. New shims would take care of it, but if you don't know how to work on rear ends, then finding a shop that does suspension work or the dealer would be your best options ( or some guy on craigslist if you want to gamble ) It's really not a difficult job, but it requires know how and you'll need to replace the rear differential fluid ( make sure you get the right stuff it the rear differential is limited slip )

Mar 07, 2014 | Cars & Trucks

1 Answer

What tool do I need to replace serpentine belt on a 98 isuzu trooper?

This is no job for a novice. Take it to somebody that knows about these. NOT a simple job. You will need to replace water pump and tensioner also.

Mar 04, 2011 | 1998 Isuzu Trooper

1 Answer

O2 sensor(s) need replacing. Does anyone know where they are located and how difficult it is for the average guy to replace? Also, which ones do I buy,,1 wire, 2 wire, 3 wire, etc.

You do not change any O2 Sensors based on an OBD2 Code

You change sensors,front 2 only at 80,000 to 100,000 miles

You use a 22 mm wrench or special O2 socket.
Some veh use a diffent size

Easy job,they are in the front of the converter
or pipe before it

The number of wires with be year and application

You get an OEM Type, NOT a universal cut and splice

5 minute job per side

Feb 01, 2011 | 1996 Isuzu Trooper

1 Answer

How difficult is it to replace a heater core? my 96 grand Caravan blew the heater core. I have just put a couple of thousand into other repairs and I either have to do this job myself, or bypass the...

It's a big job but nothing especially difficult (several hours at least). Recommend you buy or borrow (library?) a repair manual that has the procedure in it.

Sep 04, 2010 | 1996 Dodge Caravan

1 Answer

Pop out front axels 2000 trooper

I just did this on an 06,not too difficult.Take off the cover and unscrew the 3 tiny Phillips head screws and undo the large nuts, pull off the rotors etc. Then it is pretty much standard as a front wheel drive vehicle.I replaced them both on mine and it cost me approx.500.00 bucks at N.A.P.A.

Mar 20, 2010 | 2000 Isuzu Trooper

1 Answer

Brake job on 1994 isuzu trooper

are they drums on the rear? if not you can do this. on the caliper there should be 2 bolts holding it on. loosen one and pull the other out. lift the caliper up or down remove pads open the master cylinder so that you can compres the piston on the caliper. if you dont open the master sylinder cap it will be very tough. replace pads. tighten bolts nice and snug. then with car off pump brakes till tough. make sure you fill the master sylinder up that way no air gets in to it. if you do you gonna have to bleed the brakes. if that happens start at the passenger side rear then driver side rear then passenger front then driver front. please lemme know if you need help or if i helpd at all

Apr 24, 2009 | 1994 Isuzu Trooper

1 Answer

Replacing a clutch

First congratulations on buying a camaro. If you have the clutch replaced, cost is in the $500. range. Can you do it yourself depends on several factors. The transmission weighs around 75 pounds. Do yo have a hoist or going to do it on the ground? Are you mechanically inclined enogh to tackle the job? It is an easy straight forward job if you know what you are doing or can have someone help.
Let me kow if you have other questiions regarding this. I have done a lot of clutchs so I can answer your questions quickly.
RPM Northwest

Jan 23, 2009 | 1988 Chevrolet Camaro

1 Answer

Replace turbocharger

idk for sure if its gonna be the same or not, but basically replacing a turbo is pulling some bolts and replacing some bolts, the only thing that i would recomend looking up would be the torque ratings for the bolts on the turbo, but you'll prolly be able to pull it off no problem

Oct 20, 2008 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
1996 Isuzu Trooper Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14417 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides