Question about 2003 Mazda MPV

1 Answer

Replacing drivers side power window motor

I need to replace the drivers side power window motor on my 2003 Mazda MPV. I already have the door panel off and it does not look to hard but I was wondering if there were any pitfalls I should be looking out for.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 78 Answers

NO not really just make sure you have the window is all the ways up and hold it with duct take to keep it from coming down.Remove the motor and unplug the harness.Install the new one and plug it in .Its that easy

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Window wont go up


Power window repair - Mazdas247




www.mazdas247.com > ... > Mazda Protege Forum > Protege How-To

Aug 8, 2005 - 10 posts - ‎10 authors

I have a 2002 and last week the driver's side power window died a horrible death. ... Check out my mods -> 2001 Mazda Protege LX aka Rum Runner ... My front pass sidewindow won't go up or down anymore. haven't taken ...


Passenger Window on 2007 CX-7 will not come up ...

2 posts

Nov 28, 2012


Driver's side window auto-up/down issues - Mazdas247

15 posts

Jun 10, 2011


Power Window Problem - Mazdas247

7 posts

Aug 9, 2009


Driver Side window controller won't work

14 posts

Nov 11, 2006


More results from www.mazdas247.com




2003 Mazda Protege 5 Replacing The Power Window Motor ...





? 7:02


https://www.youtube.com/watch?v=N3GP2UwTtAQ

Feb 3, 2015 - Uploaded by Steve K.

2003 Mazda Protege 5 Replacing The Power Window Motor and Regulator. Steve K. ... Looks like you just ...





Amazon.com: Dorman 741-741 Mazda Protege Fr


Oct 30, 2015 | 2002 Mazda Protege

1 Answer

Drivers side window is not working


replace the window regulator/motor assembly...you'll find it at most auto parts stores here is a listing at autozone http://www.autozone.com/autozone/parts/2000-Mazda-MPV-2WD/Window-Lift-Motor/_/N-jermuZ9ck77 as far as the procedure, there are a few screws to take out and pop the door panel off, then the regulator thing is only a couple of screws...easy project. should take about 30 min. to complete. have fun!

Jun 24, 2012 | 2000 Mazda MPV

1 Answer

How do i replace a driver side window regulator and motor for a 2005 mazda mpv?


Remove the door panel, disconnect the window from the regulator. Push the window all the way up. Secure it either with duct tape, or prop good with screwdriver. Do not let it fall down. You should be able to work inside the door now to get the bolts and screws out to remove the motor and regulator.

Sep 23, 2010 | 2005 Mazda MPV

1 Answer

Mazda MPV: how to raise power window manually?


Hi,
I just had this problem with my driver door window. I took the door panel off and discovered that the motor was burnt out by testing with a meter.

I called around and found a motor at a junkyard for $135 dollars! I didn't bother looking at the price for a new one yet. Budget is very tight right now.

Like you I just wanted a way to get the window up until I could get around to replacing the part.

You can find out what I did with pictures here.

This is for the front driver side window. I did the same for the rear passenger side window and the steps are fairly similar.

There are few less steps to getting the panel off, but it was a little trickier to get the panel back on. (The key was to pull the bottom out and start at the front: Lower the forward part of the panel over the top of the frame first - while pushing firmly at the top of the panel).

The steps for disengaging the motor and raising the window with the motor re-engaged are almost the same. The only differences are that the motor is in a different position in the frame. It's down near the bottom of the frame - and seemingly inaccessible at first glance.

However, if you disconnect the motor from the frame and let it dangle on the regulator wires, you can pull it all the way through to the other port in the frame. That way, it turns out that, it was even easier to work with than the driver window motor.

Hope this helps.

May 11, 2010 | Mazda MPV Cars & Trucks

1 Answer

How do I remove driver side door window


You need to remove inner door panel by unscrewing the screws on inner door handle and take a flat screw driver wedge it between the panel and door use flash light to see the clips along the sides and lower part of door and pry them free. then look through the inner door cut outs to find window track. Once you see it use ratchet or screw driver and loosen the window free form track. Then carefully remove window.

Apr 01, 2010 | 2003 Mazda MPV

1 Answer

Drivers side window has slipped off track 2006 mazda mpv


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.

Sep 29, 2009 | 2006 Mazda MPV

1 Answer

Replace driver side power window motor


Once you have removed the inner door panel you unbolt the motor and regulator (They should come togther) and install.

Sep 28, 2009 | 2004 Mazda MPV

1 Answer

Front passenger will not work


take all the screw out of the door panel handle and lift panel off and unplug motor and put direct power to motor if motor work check you power relay i

Aug 06, 2009 | 2003 Mazda MPV

1 Answer

Driver's side power window will not work


Remove door panel to check wiring to switch and motor
See if motor is getting power through the switch - if so motor is bad
If no power to motor check operation of switch - jump wires to test
if window works bad switch

thanks.

Jul 08, 2009 | 2003 Mazda MPV

Not finding what you are looking for?
2003 Mazda MPV Logo

1,305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...