Question about 1997 Honda Prelude

2 Answers

Fault code 16 auto-transmission honda prelude

What could be the definition of fault code 16 ( hard code )on honda prelude model 1997 automatic trnsmission honda prelude

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

These auto trans on 5 gens are allaround problems I went through two auto trans in 10.000 miles. Jus do a manual swap w a Lude trans not accord! Don't let anyone talk u into an accord trans thr garbage and slow. After the manual swap my life was night and day and had no issues since.

Posted on Mar 12, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 153 Answers

You have a problem with the linear solenoid on the trans. it needs to diagd properly to c if its broke, or shorted wire, or disconnected

Posted on Sep 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission fluid capacity


Automatic or manual? Need more information. Automatic for this model should be no more than 3 quarts of Honda DW1 ATF. Manual should be no more than 2 quarts of Honda MTF.

Sep 16, 2013 | 1992 Honda Prelude

1 Answer

What does diagnostic code PO0706 and PO700 mean?


OBD II Fault Code
  • OBD II P0706
Fault Code Definition
  • Transmission Range Sensor Circuit Range/Performance
The purpose of the automatic transmission is to match the engine's optimum power and torque characteristics to the driver's desired rate of acceleration and speed by auto-selecting different gear ratios or 'speeds' to power the wheels. The Transmission Range Sensor (also referred to as the PRNDL input and/or neutral safety switch) tells the transmission control module (TCM) and the powertrain control module (PCM) that the transmission is in park, reverse, neutral, drive, low, 2nd, 3rd etc. It is attached directly to the manual valve of transmission, so when the shift lever is moved say from park to drive, the Transmission Range Sensor communicates this critical information to the above mentioned vehicle computer systems.

P0700
Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.

May 18, 2013 | 2000 Honda Civic

1 Answer

1997 honda accord tranmission problem code p0700 drive 4 flashes


Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.
This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.

Symptoms Symptoms of a P0700 DTC may include:
  • Malfunction Indicator Lamp (MIL) illumination
  • The transmission may exhibit drivability problems like slipping, etc.
Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.
If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.

Oct 20, 2012 | 1997 Honda Accord

1 Answer

Will a 1993 prelude automatic transmission fit my 1992 honda accord


If it's the S model, it *should* as it has a F22 motor in it.. the Si and SE has a H23 motor, and the VTEC has a H22 motor. I have heard of people using the F22 transmission on a Prelude motor for longer gearing at highway speeds (per Honda-Tech.com), but I haven't tried the combination myself

Dec 02, 2011 | 1992 Honda Accord

1 Answer

1986 Honda Prelude Problem where does the automatic transmission fluid go in a Honda Prelude 1986 automatic car?


There is a dipstick in the transmission down by the radiator. It is yellow in color. You add the fluid thru the dipstick hole. Check the fluid with the engine off.

Sep 23, 2010 | Honda Prelude Cars & Trucks

2 Answers

99 Honda Accord and Prelude Transmissions Interchangeability


the trans will actually bolt up to the engine..but it will not work properly without the pressure switch plugged in to the harness... if u notice, there is a hole with no threads in the prelude trans..u couldnt even thread a 3rd gear pressure switch in the trans case..trust me ive seen it b4 at the dealer where i work.. i even went as far as installing the trans and when going back together, saw the difference when trying to plug the harness in...its not the same..i laugh about it now, but was very mad at myself at the time for assumeing the parts guy brought me the right part..the guy with the prelude was about to install my accord  trans in his prelude ...luckily i was able to stop him b4 he installed my trans in his prelude...i laugh about it now

Apr 21, 2009 | 1999 Honda Accord

1 Answer

Honda prelude 93 auto transmission: "s" light flashes


Try changing the Transmission oil - can solve a host of problems, including rough changes.

Apr 12, 2009 | 1993 Honda Prelude

2 Answers

Transmission light stays on in my 2000 honda prelude


Hi there Firstly, you need to locate the Autobox ECU and identify whether a fault code is showing. This will more accurately determine where the fault is where the Honda Dealer will be best placed to advice you accordingly. Best regards, Scottech.

Apr 03, 2009 | 2000 Honda Prelude

Not finding what you are looking for?
1997 Honda Prelude Logo

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...