Question about 2004 Ford Expedition

Open Question

04' ford expedition A/C diverter stuck on defrost

A/C air diverter does not turn off of defrost. Fan speeds work, rear air works but only defrost. Also the A/c in seats do not work. Checked all fuses but cant tell if the relay's are bad. Any help would be great.
Thanks, Chris

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dgjtex
  • 405 Answers

SOURCE: location of fuses and relays for the rear window defroster

two locations, one under dash and one under hood. without your manual, thats about all I can help you with

Posted on Dec 18, 2008

  • 1 Answer

SOURCE: rear window defroster, no driver heated seat

check the ground on the passenger side of the rear window under the trim panel. That is what was wrong with mine.

Posted on Jan 27, 2009

michigan man
  • 3533 Answers

SOURCE: Rear window defroster

you need to make sure the wires are on the glass on each side and there is no broken wires in the glass there is a repair kit at a auto store to fix if you have a volt meter test it and that way you can find the problem look for breaks in the wire in the glass and do not for get the wires on each side of the glass.

Posted on Feb 12, 2009

localwonder
  • 6784 Answers

SOURCE: heater is blowing but its cold air not hot air 2000 expedition

Make sure the heater core is in the open position by using the shut off valve and turning it to open. next, you may have a malfunction in the direction door the directs the air flow in the dash. a lever may have become lose or separated. may be a bad servo motor not directing the door to move to the heater position. i would start by checking that shut off valve first on the heater core.

Posted on Mar 13, 2009

moparownr
  • 667 Answers

SOURCE: 2004 Ford Expedition XLT, front blend door actuator

Hope I was avle to help, glad you up and going.

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard removal 2001 expedition


Chances are You My Need A climate control Module, But You Need to Drop the Heater and AC Housing to make sure the Diverter doors are working,Since Fords Do have a Outside Leaf Catcher Problem It May just Be Leaves Preventing the Doors from Operating Properly,But then Again It requires that the Heater Box be dropped,Have Had some luck Using Compressed Air to Clean the debris into the A/C Drain but that will also have to be Blown Clear anyway Expect A few Hours of work to fix the Problem

Jul 18, 2014 | 2001 Ford Expedition

1 Answer

2003 ford expedition i just got it a week ago and the front heat works great but the back vents only blow cold air. How do i fix this?


With the car parked and engine idling, turn the ventilation control between windshield defroster and "open air ducts" to front and rear vents. Listen to pinpoint where the valves are that open and closes the air ducts. It sounds like the air duct to rear vents are blocked, and the cold air in rear air duct is coming from "outside ventilation." The air vent to allow hot air to the rear vent is stuck in "open ventilation" mode, like when you're driving in spring or summer months.

Nov 29, 2013 | Cars & Trucks

1 Answer

Cold air blowing out of vents when the heat is on but the rear heat works fine 99 ford expedition


Could be the diverter valve. It's the one located near the firewall in the engine bay. the valve is in-line on one of the two coolant hoses that run through the firewall. Have a helper rotate the temperature knob back and forth, with the ignition turned on, and you watch to see if the valve is being adjusted. I'm guessing it isn't. Best of luck!

Jan 30, 2010 | 2007 Ford Expedition EL XLT

1 Answer

Fan forced air trouble in a 2005 Focus


it could be a vaccum line thats disconnected or the bypass vent door that diverts the air is either stuck or broken.

Sep 16, 2009 | 2005 Ford Focus

1 Answer

I have a 2006 Ford Expedition. The Air


you have a vacuum loss to the ac control head, the motors that divert air are vacuum operated, if you loose vacuum the system goes to defrost for safety reasons, the vacuum comes from the engine, then goes o a plastic vacuum tank under the hook start there, it is a 3/16 id hose.

Aug 14, 2009 | Ford Expedition Cars & Trucks

3 Answers

2004 Ford Expedition XLT, front blend door actuator


Hope I was avle to help, glad you up and going.

May 26, 2009 | 2004 Ford Expedition

1 Answer

2003 Ford Expedition XLT FX4 MAIN FAN CONTROL SWITCH


That usually means the circuit board for the fan motor is Burt out big job prob to replace dealer may be.

Jan 22, 2009 | 2003 Ford Expedition

1 Answer

Air diverter only diverts blown air to feet or defroster.


its a hvac mode accuator it controls where the air blows i have the same problem with my envoy waiting on the part in the mail its up under the dash. the part is vin specific so check for the part number with a dealer they told me $103 but i found one online for $57

Jan 06, 2009 | 2006 Chevrolet Trailblazer

1 Answer

A/c problem


You either have a bad control, or motor running the air direction door in the front HVAC unit, or a door that is stuck.

The front and rear units are totally separate.

The door directs where the air, cold or hot, should come out, whether it is panel vents, floor, defrost, or any combination of those.

This door and motor are located inside the heater box which usually requires a lot of the vehicle dash assembly to be taken apart to get to these parts.

Aug 28, 2008 | 2000 Ford Expedition

1 Answer

2000 ford expedition fan control only has high speed. Where is the module?


it is more than likely your blower motor, the control module only controls the position of the air flow, such as vent, floor defrost......

Jun 11, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2004 Ford Expedition Logo

Related Topics:

564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...