Question about 2002 BMW 5 Series

2 Answers

Punctured tyre warning indicator

I have recently bought a 2003 bmw 530 d with bmw i drive system install,the car has had after market tyres fitted and no longer has the run flat tyres on. Every time i start the car i have tyre puncture warning on the i drive screen and it wont turn off is it possible to reset this manually.

Posted by on

  • aarronbingha May 24, 2009

    Cheers i will give it a go.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Use the I drive system to reset flat tire monitor, go to vehicle settings, then flat tire monitor, then select reset, then you have to drive the car system resets as you drive

Posted on May 24, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2006 BMW 320D. The aircondioner does not give sufficient cooling when on.

Posted on Sep 02, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset bmw 530 puncture warning light


The TPMS signal is not idetified by your vehicle,when a predetermine amount of air is not present the sensor turns off. When this sensor turns off .Your vehicle TPMS monitor notice it and turns the light on.Some vehicle needs the TPMS monitor to be reset.Others need to be turned on. Still others just needs a set amount of air pressure to turn on and driven in your case the TPMS monitor should detect the sensor and the light will turn off

Mar 13, 2012 | Cars & Trucks

1 Answer

Hi, my tyre pressure sensor came on indicating a puncture? I have felt the tyres over a 3 hr period, but no tyres are going soft. Could it be the sensor?


Try to inflate each tire to the same pressure and run it. If the light comes on after clearing it, then it could be a bad wheel speed sensor circuit.

But, be warned, that the car will sense even slight pressure irregularities over several miles based on wheel speed sensor data.

Nov 29, 2010 | 2004 BMW 5 Series

1 Answer

How do i turn off tyre puncture warning on bmw 5 series


When your typ BMW 5.serie is E60/61 confirm air tyre presure and reset RPA (reifen pannen anzaige) in to i-Drive menu/setting/car/RPA.
When your typ BMW 5.serie is E39 ,here are systems used by the RDC and RSC!
RDC confirm tyre value and a more settled ride system itself sets the RSC and the system would have had on the center tunnel RSC she button pressed the system will reboot.

Jun 24, 2010 | 2002 BMW 5 Series

3 Answers

Warning sign on bmw 1 series 2007 looks like horseshoe with explanation mark next to it with squiggly lines underneath. do not have handbook so cannot check.


Tyre pressure warning light
Check pressures
When correct,turn ignition on and use lever on top of indicator stalk to scrool untill you see tyre pressure reset
Press end of stalk to reset

May 07, 2010 | 2005 BMW 1 Series

1 Answer

2003 X5 - TyreIndicatior Inactive shows on VDU.


Just double check the tyre pressure as per specification and reset the the Tyre Pressure Monitor system. Also make sure no Tyre punture on it.

Mar 05, 2010 | 2004 BMW 5 Series

1 Answer

I've had 4 new tyres fitted to my 2006 BMW 320d and the tyre pressure control warning light stays on - how do I turn this off?


Insert key press start button,push scrool on top of indicator stalk,untill you see tyre warning. Then press end of stalk to reset

Feb 28, 2010 | 2006 BMW 3 Series

1 Answer

I have a orange warning light flasing on my mini cooper 51 plate and i do0nt no wat it is can u help?? the symbol has a (!) on it? there is a button with the exact same symbol under my handbrake


This is the tyre pressure indicator. It shows that one of the tyres is losing pressure through a calve leak or puncture, or can also be triggered after you get new tyres or rotate the tyres.

The method to re-set the tyre pressure warning light is as follows:

Turn the ignition to position 2 (ignition on but motor not started). Press and hold the button under the handbrake until the warning light on the dashboard comes on for several seconds. Start the engine. Drive the car normally for several minutes. This will cause the system to re-set to the current tyres and pressures you have. It will then only turn the warning light on if the pressures change - for example if you get a puncture.

Oct 17, 2009 | 2002 Mini Cooper

2 Answers

Run flat tyre warning light is on i have checked tyre pressure


This will only come on when a tyre has dropped in pressure (not spare). It work on the principle that a tyre with less air has a smaller rolling circumference and therefore a different wheel speed. This is then monitored against other signals from other wheels and determined that a loss in pressure has occured.

If all tyre pressures seem ok, there could be a chance of a small unoticeable leak and would require a bath test. This is when the tyre is dipped in water and bubbles would appear where the puncture is.

Ultimately the system may just need to be reset, or has incorrectly been reset from a tyre change. For this you just press and hold the TPC button (located on the centre console above the gearstick - looks like a flat tyre with an exclamation) turn on the ignition to position 2 and the light will come on re then yellow,go out, come back on yellow. When it comes back on yellow it re-initializing the system. You can let go of the button and after 20 odd seconds the light will go out for the final time, completing the reset.

If the light continues to come on after the reset then you definitely have a puncture somewhere!

Hope this helps!

May 28, 2009 | 2005 BMW 3 Series

1 Answer

BMW i system


this needs to be reset with a scan tool capable of doing european cars, call around and see if some one has this tool, get back to me if you need more help.pleaserate my fix as i strive to be te best Thanks Ray

May 12, 2009 | BMW 525 Cars & Trucks

5 Answers

BMW 320D,2006- run flat tyre warning light is on. How do I reset?


Using the indicator stalk, navigate to the tyre pressure reset option, press the reset button twice in short succession but hold it in the second time until a tick appears on the display

Apr 19, 2009 | 2003 BMW 325

Not finding what you are looking for?
2002 BMW 5 Series Logo

2,461 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...