Question about 1992 Daihatsu Rocky

1 Answer

Gas(gauge)problem the (gas)gauge moves only when it's full, can be changed or fixed?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Daihatsu Master
  • 1,348 Answers

The sender unit is attached to the fuel pump in the tank.
it can be repaired but it is costly.the other option is to remove the cluster and make sure that the indicator needle is free to move and is not hanging up from a weak return spring or a warped cluster plate

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix gas gauge?


If your gauge reads full or empty all the time or just doesn't move at all chances are its not the gauge but rather the sender unit in the gas tank itself.service on these is replacement only.Depending on the car,(unless you have an access hatch in the floor of the car) it will require dropping the gas tank out to replace this.It can get expensive to fix and you might just w ant to live with the problem.good luck

May 07, 2014 | 1999 Pontiac Grand Am GT

1 Answer

Gas gauge stay on full but at idle moves up and down


Replace fuel sender in gas tank, mounted on fuel pump module.

Jan 17, 2014 | Cars & Trucks

1 Answer

Fuel Gauge wont move past 3/4 tank even with full tank


There is no easy fix.
Either the gauge on the dash is faulty, or the sending unit in the tank.
The sending unit uses a float which may be getting stuck at the 3/4 mark.

Jan 28, 2013 | 1995 Mercury Mystique

1 Answer

1970 Ford F100 Gas Gauge Not Working


It may be the sending unit in the tank that needs replacing. Here's how you can check: Turn the key on and disconnect the sender unit at the gas tank. Ground the sender unit's wire with a jumper wire from the truck's harness to ground. Watch the gauge. If the gauge on the dash is good, grounding the sender wire will cause the gauge needle to react and should move to full. This would indicate a new sending unit is required. If the gauge doesn't move when the sender unit is grounded, the gauge is bad and needs replacing. Pull the instrument cluster out to replace the gas gauge. Likely any old ford gas gauge might work-back then, there were not so many production changes.

Nov 14, 2012 | Ford Cars & Trucks

1 Answer

Gas gauge not working


Since the guage moved, your wiring to your pick up is still good. Bad news is that if it doesn't move or moves all at once from full to 1/4, your float sensor is probably sticking or just bad. To clean or replace it would require you to drop the tank and pull the sending unit out. Sorry.

Dec 04, 2011 | 1993 Cadillac Fleetwood

1 Answer

Stop at gas station after driving 250 miles in my 2000 s10 extreme and pump shuts off like tank is full after 3 gallons of gas go in...should take 11 or so gallons. Also gas gauge stays on full and will...


sounds like you have a restriction in the fuel inlet pipe,( maybe air locking) also your tank sender unit neads replacing to fix you gauge fault, or it maybe that it has something that is not alowingf it to move freely inside the tank, have a good look inside when low on fuel. through the hole where the sender is fitted.

Sep 30, 2010 | Chevrolet S 10 Cars & Trucks

3 Answers

Gas gauge is not reading correctly. Shows a full


the problem is caused by a defective gas gauge sending unit, this part is located inside the gas tank, you must remove the gas tank to replace it.

Dec 02, 2009 | 2002 Cadillac Deville

2 Answers

Fuel gauge stuck on full for my 2000 ford taurus SE


it is probbally the fuel pump in the gas tank. It has a float like the one in your toilet and a sensor attached to it to tell you how much gas you have.

Aug 08, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
1992 Daihatsu Rocky Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...