Question about 1994 Ford Taurus

1 Answer

Change spark plugs and now car wont start.....1994 ford tarus

1994 ford tarus ..change spark plugs and now car wont start...geting fire but won't crank.

Posted by on

  • 6 more comments 
  • angelo783 May 23, 2009

    I pull one plug and got and sparks while trying to start it.

  • angelo783 May 23, 2009

    Car was running ok ..but once i change the plugs and wires ...it won't start..I change each plug one at atime with wire. I check to see if fuel was going to injectors and yes ...but still wont start.

  • angelo783 May 23, 2009

    the motor will turn over ,but won't start.

  • angelo783 May 23, 2009

    Ok thanks ...well all i did was the plugs ...i will check again.

  • angelo783 May 23, 2009

    Oh ! so far no backfires through exhaust or intake right now

  • Tyson Strickland
    Tyson Strickland May 11, 2010

    so the motor cranks over, Or how are you getting spark if the motor does not crank?

  • Tyson Strickland
    Tyson Strickland May 11, 2010

    how do you know if its getting fire if it won't crank

  • Anonymous Mar 24, 2014

    How do i get to the rear spark plugs

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 150 Answers

Do you have the "firing order" correct? In other words, is each spark plug wire going to the same cylinder it was on before you changed the plugs? If you have done nothing else but changed the plugs then this is the most likely problem.
If when you try to start the car it backfires through the exhaust or backfires through the intake. Then this " IS" the problem. Good luck.

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed spark plugs and firing order is correct but truck wont start


well if it started before then the distributor is most likely good but check your ignition coil and also you ignition module also the pickup coil

Feb 26, 2013 | 1986 Ford Bronco

1 Answer

Engine missing wont fire properly, i think its the spark plugs how do i change them ?


CHANGE SPARK PLUGS.YOU NEED SPARK PLUG 3/8 SOCKET.YOU NEED SHORT AND LONG 3/8 EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER AND A SPARK PLUG GAUGE SET THE SPARK PLUG GAP.NOW CHANGE 1 SPARK PLUG AT A TIME SO YOU MIX THEM UP GET FIRING ORDER MIX UP CAR BACK FIRE WONT CRANK.ALSO CHANGE PLUG WIRES ALSO.

Nov 10, 2010 | 1994 Honda Civic

1 Answer

I have a 1998 ford wind star new fule pump but still not geting fule , wont crank engine turns ove but won;t start


INSTALL PRESSURE GUAGE THEN CK, VOLTAGE TO PUMP PCM TURNS ON PUMP RELAY FOR 2 SECONDS WHEN KEY CYCLED ON ,, IF NO POWER CK INERTIA SWITCH ( MAY BE TRIPPED ) IF NO POWER TO INERTIA SWITCH CK FUEL PUMP RELAY IF NO VOLTAGE AT PUMP RELAY THEN CHECK FOR SPARK AT PLUGS IF NO SPARK CK PCM POWER RELAY IT SUPPLIES VOLTAGE TO PCM THAT INTURN POWERS FUEL PUMP RELAY

HOPE THIS HELPS

Aug 08, 2010 | 1998 Ford Windstar

2 Answers

My car wont start after i changed spark plugs and wires.


did u mix the plug leads up when u replaced them wrong firing order 1342

Apr 02, 2010 | 1994 Honda Civic

1 Answer

How to change the spark plugs in a 1998 E150 conversion van and whats the firing order


WELL YOU CHANGE PLUGS GOOD TO CHANGE WIRES ALSO.YOU REPLACE ONE AT A TIME SO YOU WONT GET CONFUSED.YOU NEED A SPARK PLUG SOCKET TORQUE WRENCH.A 3/8 RATCHET.SHORT AND LONG EXTENSION.SPARK PLUG GAUGE. YOUR FIRING ORDER IS 1 3 7 2 6 5 4 8 THIS FIRING ORDER FOR THE 4.6L V8 AND 5.4L V8 ENGINE.

Mar 05, 2010 | Ford E-150 Cars & Trucks

1 Answer

I want to change the spark plug wires on my ford tarus and need to know how to locate them


If you don't see them, there might not be any. Some cars have a coil for each plug and they are mounted right above the plug so that there is no need for plug wires.

Jan 15, 2010 | 2001 Ford Taurus

1 Answer

Just changed plugs on 1994 ford explorer and it wont turn over wondering if its the gas ladder or fuel relay switch


Is it not turning over or not firing? If not firing, it could be bad crank sensor, coilpacks, or module
If no spark

If no fuel, bad fuel pump relay, plugged fuel filter, or low fuel pressure.

Sep 30, 2009 | 1994 Ford Explorer Limited

1 Answer

Terus miss fireing


daer friend:please check the following items in order to illiminate problem,compression test cyl 1,spark plug,plug lead,and coil pack,if not have ECU checked out

Sep 22, 2009 | Cars & Trucks

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...