Question about 1996 Chevrolet K1500

1 Answer

Misfire after ten minutes or so it starts to misfire parked or diving changed my fuel pump fuel pressure regulates fuel filter, plugs, wires dist. sensor and its still the same problem help me please

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

How about the distributor cap? It is a common failure on these trucks. Also Try unplugging the O2 sensors(upstream) and drive the truck with them unplugged. The Service engine light will be on but see if it makes a difference to the miss.

Posted on May 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

01 pontiac boniville multaple mis fire change all wire and apark plug


P0300 ? random misfire ? Having a qualified repair shop diagnose the problem using scan data is the proper way to diagnose , not guessing and just replacing parts .
002 Fuel System Tests Start Here

Could be a fuel delivery problem , What are the fuel trims at ? Short and long term ? Are the O2 sensors switching normally ? What is the MAF sensor grams per second / HTZ .
Is there a vacuum leak . What's the fuel pressure ?
003 Fuel System Tests Scan Data Tests

Aug 24, 2017 | Pontiac Cars & Trucks

1 Answer

Have changed to crankshaft sensor the oxygen sensor spark plugs and wire and wont start even when it is turning over


Borrow a fuel pressure tester from Auto Zone and test the fuel system. It could be that you have a bad fuel pump or fuel pressure regulator. It also could be a plugged fuel filter.

Mar 14, 2013 | 2000 Pontiac Sunfire

2 Answers

Hard starting, no power, idles rough, check engine lite code shows misfire on #1,#2 and #3 cylinders


check fuel pressure, check fuel pressure regulator, change fuel filter. If fuel pressure is low it could be a bad pump, a clogged filter, or a malfunctioning fuel pressure regulator. If all those check out, then check crankshaft and camshaft position sensors.

Jan 19, 2011 | 2001 Kia Spectra

1 Answer

My suburban stalls and sputters out after running for about 15 minutes. I have replaced all the O2 sensors, plugs, wires, crank sensor, oil change, fuel filter, cap and rotor. What else could be the...


need to check the fuel pressure.and if its blowing black smoke,the fuel pressure regulator is bad.the fuel pressure should be around 65 pounds.

Mar 27, 2010 | 1999 GMC Suburban

1 Answer

I have a 2000 s-10 blazer 2wd vortec 6 it has been a great truck .Lately it has balked on the road,when in out of gear it will not rev over 2500 rpm,when driving its slow to pick up ,sometimes...


Check fuel pressure wit a guage at schrader valve on fuel rail with key on and engine not running. The pressure needs to be 55 to 61 PSI. If it is less than 55 PSI, replace the fuel pump in gas tank and fuel filter. If it is more than 61 PSI, replace fuel pressure regulator.

Feb 21, 2010 | 2000 Chevrolet Blazer

2 Answers

Engine misfiring before and after changing the plugs and wires.


or the fuel pressure regulator! wens the last time u changed the plug wires and checked the dist system-those things wear and so do ign modules-go to a parts place n chec out the maintenance manuals

Jan 22, 2010 | 1996 Ford Explorer

1 Answer

1999 Ford Windstar-Will Turn over but won't start?


fuel pressure regulator could hav failed-located by engine or the ignition module may not be workin-by dist area try not to be a parts replacer-buy a repair book

Jan 09, 2010 | 1999 Ford Windstar

1 Answer

1994 jeep grand cherokee laredo starting problems


Check to see if the fuel pump is running after it shuts down...could be a relay or the pump itself (overheating internally) Checked the fuel filter yet? Some crank sensors need to be shimmed. If it's too close to the flywheel even though you recently changed it, if it's too close to the wheel it can fail again. May not be the case but worth checking over. Also check the ceramic resistor on the left fender near the master cylinder if you have one. That too can cause problems.

Dec 27, 2009 | 1994 Jeep Grand Cherokee

1 Answer

96 s10 2.2 4cyl. running lean . It has new fuel pump and fuel filter. I've checked the converter, new 195 degree thermostat,changed fuel regulator,changed front 02 sensor, changed coils and Diagnostic tool...


I know you said new fuel pump and filter but I would recheck the fuel pressure. Drive the vehicle with the fuel pressure gauge on it and see if the pressure drops after 10 minutes.

Sep 02, 2009 | 1983 Chevrolet S-10

Not finding what you are looking for?
1996 Chevrolet K1500 Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...