Question about 1995 Geo Tracker

2 Answers

1995 Geo tracker Stereo Unlock Code

My daughter bought a used Geo Tracker. The horn stopped working and my husband tried pulling fuses trying to fix it. In the process the stereo set itself to LOC. How do I get the code to unlock it?

Posted by on

  • 1 more comment 
  • aurorasun May 23, 2009

    Oh that sucks. Ugh. Boy do I feel ripped off. thanks!

  • aurorasun May 23, 2009

    I know how to dial through the numbers with the seek & tune buttons, but I'm not sure if I'm supposed to do something else next. I think I'm out of luck anyway. I tried the 000 (execpt it's a four digit number so I added an extra 0) and then pushed the Am/Fm button and got Inop (or Inpo can't remember which). I read somewhere you can't do anything after that. I knew I shouldn't have let her buy this car. Ugh.

  • aurorasun May 23, 2009

    I tried holding the 1 & 4 button down but the ---- won't display. Thanks for the link. I'm going to go to the used car dealer I bought the car from (a month ago!) and see if maybe he has the code or can get it for me. And while he's at it, I'll have him look at the horn that STILL doesn't work.

    Thanks for your help!!



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Geo Master
  • 3,854 Answers

If your lucky the code may have been written down in the manuel book. If it's not written down in the book or it's missing, drive to the chevy dealer that sells Geo trackers and the Service adviser can help you unlock the stereo by getting the information from the Vin number.
Good luck and hope this help.

Posted on May 23, 2009

  • Harvey N Tawatao
    Harvey N Tawatao May 23, 2009

    Was just thinking your code may be 000 if was never set by the owner. Check with me if you're not sure how to unlock the radio with the code. Good luck.

  • Harvey N Tawatao
    Harvey N Tawatao May 23, 2009

    Setting your security code:
    1. Write down any four-digit number and keep it in a safe place. 2. Turn on the ignition to the ACC or ON position. 3. Turn the audio system off. 4. Press the 1 and 4 buttons together. Hold them down until ---- shows on the display. 5. Press Seek and/or Tune and 000 will appear in the display. 6. Press Seek< and hold it until the first digit of your code appears. Release the button. 7. Press Seek> and hold it until the second digit of your code appears. Release the button. 8. Press Tune< and hold it until the third digit of your code appears. Release the button. 9. Press Tune> and hold it until the fourth digit of your code appears. Release the button. 10. Press AM-FM after you have checked that the code you entered is the one you wrote down. "rEP" will appear in the display, which means you need to repeat steps 5 through 9. 11. Press AM-FM again and the display will now show SEC. 

    Go to step 4 enter 000 then skip to step 11. and see if that works. if not there is always the link i gave you above or


  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

You must bring the the car to a geo/chevy dealer so they can reset the radio to factory unlock. It might be cheeper to have a new cd radio installed best by is a good place for around $200 a radio can be purched and installed .

Posted on May 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Changing a clutch in a 95 geo tracker

there are in fact 2 disks, one for 8v and one for 16v 95hp.
its all here, every step.
click clutch

Dec 16, 2012 | 1995 Geo Tracker

1 Answer

1993 Geo tracker blows fuse when the horn is honked

If blowing fuse when honking horn you have a bad ground to the horn or the horn itself has a internail switch. Try using a higher amp fuse, good luck

Apr 04, 2011 | 1993 Geo Tracker

1 Answer

We just bought a 1989 geo tracker. It had a oil leak someone has started to fix. However we're not sure all the parts are under the hood. My husband thinks something is missing. How can i find out what it...

I might look on or and search for one that someone is trying to sell. Tell them you're interested in seeing what condition the engine bay is in. Ask for some pictures.

Mar 14, 2011 | 1996 Geo Tracker 2 Door

1 Answer

95 geo tracker blowing fuse .changed flasher works few flashes than blows fuse. replaced all bulbs and checked wires,ok.

the flasher is defective return it and try another one i have seen this before several times.

Feb 01, 2011 | 1995 Geo Tracker

1 Answer

95 geo tracker, radio locked

get cpy of your title, remove radio, call dealer, and they give u unlock code for free

May 14, 2010 | 1995 Geo Tracker

1 Answer

1996 Geo Tracker horn won't work. Fuses all look good!

well what i can say is try and rig some wire to see if the horn speaker even works and if does then you may have a short in the wiring in the steering wheel switch try and see if you can close the horn switch under the steering wheel cover where the horn switch is by removing the screws on the back un hooking the wires and then ground it out by touching the center where the bolt is after years of honking the wires may not have gotten a good first connection when the car was first made and may have broke inside and even tho the fuse may look good there might be a break you may not know about its best to use a test light there about 3 bucks and will help better find a bad fuse then just looking to see if its burnt a new fuse can still be a bad one

Aug 28, 2009 | 1991 Geo Tracker

2 Answers

Dash lights, dome lights and stereo quit workign when installing

You probaly fried the dimmer switch, I did the same thing to mine. All i did was eliminate the switch. I cant change the brightmness but they do turn on.

Jul 11, 2009 | 1995 Geo Tracker

Not finding what you are looking for?
1995 Geo Tracker Logo

1,358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides