Question about 2000 Oldsmobile Intrigue

1 Answer

Pass lockm system

Pass lock system on my 99 chey s10 has engaged can it be reset without taking it to the dealer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Oldsmobile Master
  • 3,854 Answers

To reset the pass lock system, turn key on for five minuets, then shut key off for five minuets. then restart normally. If the system resets for no reason you need to replace the anti theft module.

Oh leave the key's in the ignition switch when turning the key to the off position. I know that to replace the ignition lock and key at the dealer will be expensive. Your S10 is 9 years old and if you can find a lock smith who knows how to by pass the wire harness in the steering colum have him do that so you'll never have this problem again.
If you want to know how to by pass it your self, i'll send you an e mail on how to do it. Just can't post it here, never know who's reading eh.
Good luck and hope this helps.

Posted on May 22, 2009

  • snipes0276 Mar 04, 2011

    please send me the info on how to bypass the passlock system sillysnipes_0103@yahoo.com thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Theft lock engaged because multiple attempts to start without key in car. How do I reset?


Try locking it with the fob, then unlock it with fob. If the antitheft is engaged, the light will stay on or flash.

Oct 02, 2016 | 2010 Land Rover Range Rover

1 Answer

Belt routing diagram for 1991 chey S10 2.5L 4 cylinder


google it ask google the same way you did here and it will show you the diadram

Feb 19, 2015 | 1991 Chevrolet S-10

1 Answer

99 S10 4 wheel drive wont engage


have you tried some of the chevy 4x4 forums. they have diagrams and many work on these vechiles. i have received good info from them before

Jan 30, 2015 | 2000 Tracrac Chevy S10 Pickup - 7 long bed...

1 Answer

2003 GMC S10 the security light is on after some repairs to it now it won't start, help. how do i reset the security,


it resets every time you use the remote or lock and unlock the drivers door with the key, if that doesn't reset the system try this, if the following reset doesn't unlock the system u still have a problem and the dealer needs to rescan the system.

PASSKEY LOCKOUT RESET ALL GM CARS 1999 AND UP

1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the PASSKEY system to recognize your key.

Oct 20, 2010 | 2003 GMC Sonoma Extended Cab

1 Answer

My 1997 Jetta power windows automatically engage and


yes this does happen,try disconnecting the battery and joining the leads together ,this often resets it other than that its either a new drivers door lock or the dealers to have it re programmed

Mar 20, 2010 | 1997 Volkswagen Jetta

1 Answer

Transmission problem


Sounds like the clutch went out.

Dec 23, 2009 | 1999 GMC Suburban

1 Answer

MY CTS IGNITION WONT TURN BACK AND IT STATES THAT IS IN LOCKED MODE ON THE DASH. DOES ANYONE HAVE AN IDEA OF WHAT IT COULD BE ?


this is a Pass Key anti theft problem, do the following to reset the system, if this doesn't work u will have to take it to the dealer, they are the only ones with the test gear to find and fix the problem

PASS LOCK RESET GM CARS 1999 UP
1) Put the key in the ignition and turn to the "ON" position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the passlock system to recognize your key.

Feb 22, 2009 | 2003 Cadillac CTS

2 Answers

2000 chey blazer s10 wont go into 4 wheel drive


Need more information, but try to engage with engine at idle and transmission in nuetral and then slowly put into gear. Some vehicles will only engage 4wd system in D for Drive not the D with the circle around it for Over Drive, due to speed restrictions on the system. 4H is used for inclement weather and snow for highway use or cruising off road. 4L should only be used OFF road not on pavement and for slow speeds only. If that does not work put in drive and slowly move vehicle forward with 4wd switch engaged shift to nuetral while coasting and then put into a forward gear NOT reverse and it should engage, make sure you do not have locking hubs as well, I don't know many vehicles that have locking hubs as of late, but I could be mistaken. Hope this helps. Other post have also stated that the 4wd switch could be faulty, and can easily burn out.

Jan 10, 2009 | 2000 Chevrolet Blazer

1 Answer

99 olds aurora pass key problem


There is most likely a problem with the tiny sensor in the ignition lock cylinder, it is not reading the key chip and locks u out, the problem is u can't just replace the lock cylinder u need a dealer only re-programm of the pass key system since the control module will not recognize the new lock code, catch 22 if u ask me. Do u have more than one key for the car? do both do this?

Jan 10, 2009 | 1999 Oldsmobile Aurora

1 Answer

S10 pickup truck-


Take it to Midas and have them inspect the brakes. It is probably the anti-lock system starting to flake out. See if you get the ABS light on at any time (might want to get engine codes read at AutoZone just as an extra measure of thoroughness too)

Aug 25, 2008 | 1999 Chevrolet S-10 Pickup

Not finding what you are looking for?
2000 Oldsmobile Intrigue Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...