Question about 1995 Chrysler LeBaron

3 Answers

My power steering has gone out.

My steering has gotten all screwed up and it takes all the muscle i have to turn a cornor. what could be worng?

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 68 Answers

Check your power steering fluid if empty fill it up see if your power steering is working after filling it.if it is full you are goin to have to get a new pump also make sure you have no leaks coming from pump alot of times the seal goes bad in the pump causing it to run out of fluid and burn the pump up and of course make sure belt is on

Posted on May 22, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chrysler Master
  • 2,007 Answers

It's either lost all it's oil from a blown hose, or the belt is broken.

Posted on May 22, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 767 Answers

Have checked if the belt is there on the power steering pump?
It could just be tht the belt has snapped thus the pump not functioning and thus the tough steering wheel!

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Ford 500 steering wheel locked or power steering not working. Check system alert and battery light turns on.


Call your Ford dealer and ask them if you car has a locking steering wheel.
Since "forever" ago, there was a were "star wheels" attached to the inside of the steering column, for the purpose of preventing theft by locking the steering wheel when the key was removed.. The bad side was that those locks can jamb if the steering wheel
is at the end of it's travel, such as can happen if the front wheel of the car is jammed against a curb when parked.
Your fix might just be to turn the steering wheel whilst trying to start it, though it may take a little muscle.
God bless your efforts.

Jul 04, 2017 | Ford Cars & Trucks

1 Answer

2000 Mercury Cougar, Automatic, 2.5L, V6. Car started making a whining noise when turning the wheel so I start putting in Power Steering Fluid within a couple days it does the same thing. Now car is making...


You likely have a bad power steering pump or a hose that is leaking. Do not put any fluid other than power steering fluid in the power steering reservoir. if you do you will wreck the hoses and pump. Better not drive it till you get it repaired or you may ruin something else or have an accident.

Mar 21, 2017 | Cars & Trucks

1 Answer

My steering wheel is hard to turn? Like you need to use muscles for it to turn. And I put power steering fluid in it, but still nothing? And when I cut the wheel all the away either way it get's...


lift car up on the front on both sides,put chassis stands,and try turning wheel and feel if any different.
Is the power steering belt still intact .

Jul 28, 2011 | Mitsubishi Galant Cars & Trucks

1 Answer

The tilt steering wheel on my 1988 Chevrolet P/U 2500 series suddenly became very loose and wabbly inside the cab. It still steers fine, but would like to know if there are bearings or something else that...


You will need a steering wheel puller, a lock plate depressor, and a number 4 or 6 star socket. Pull the steering wheel, then the lock plate. Remove the screw that holds the hazzard light button on, there is a spring in the switch so hold on to it. Pull the turn signal lever out of the switch, some have a screw some just pull out, if you do not see a screw where the lever plugs into the switch then it just pulls out. Remove 3 screws that hold turn signal switch in the steering column, pull up on the switch to get it over the end of the steering shaft, if there is not enough slack in the wire you will need to get undr the dash and unplug the wire so it can move up. You do not need to pull the switch out just get it out of the way. After all that is done you should be able to see two holes on the left and right side of the steering shaft, above center, in the bottom of these holes there are star headed screws that have come loose, tighten these and youe wobble will be gone. Then all you have to do is put er back together.

Apr 05, 2010 | 1988 Chevrolet C1500

2 Answers

No power steering to the left.


Well, the pump doesnt know what direction you are turning, so I suspect the box. Thats guessing because I really dont know what you have. Year? Make? Model? Trans? Gas? Diesel? Ect.

Nov 11, 2009 | Cars & Trucks

2 Answers

Hard steering


There is no power steering fluid since the steering is manual. LOL It takes a little braun and muscles, it's a good form of exercise to look at the bright side, and most of all you save a lot of gas at the same time. Hey i wish my car was like that.

Jun 30, 2009 | 2001 Toyota Echo

2 Answers

Can not turn the key .on my 1996 toyota camry


Look for a certified diagnostic centre so your car can be properly checked. I suspect that it has a security code issue. It can only be corrected that way. Try it out and get back to me. +2348023080045

Mar 17, 2009 | 1996 Toyota Camry

1 Answer

Power steering gone


the motor could have gone bad that turns the tires

Jan 02, 2009 | 2007 Volkswagen Jetta 2.5 Sedan

Not finding what you are looking for?
1995 Chrysler LeBaron Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...