Question about 2000 Ford Taurus

1 Answer

No brake lights on 2000 taurus

Changed switch none still....wires seemed to be different sizes from the harness to the switch have running lights/turn signals/emergency lights....

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,869 Answers

Check the feed to your brakelight switch
using a long,long piece of #18 gauge wire connected to the + (positive) battery post/cable then to the brakelight switch press the brake pedal if the brakelights come on run a new supply wire to the brakelight switch

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

97 Olds Bravada wipers and turn signals not working properly


I agree, the multi-function switch would affect both components.

You could get a wiring diagram and test the circuits - or get a new switch and plug it into the harness.

Jul 06, 2012 | 1997 Oldsmobile Bravada

1 Answer

My turn signals are not workin,none in front or back,the lights on dash are not even coming on;but my hazards work!


Turn signal and emergancy lights usually use the same light bulbs and run off different flashers,try changing out the turn signal flasher.

Mar 15, 2011 | 1993 Buick Park Avenue

1 Answer

2002 Malibu. The turn signals work intermittently. By tapping on the emergency light button the signals work. Any solution?


Sounds like you may have a loose wire in the harness. It may be a loose wire in the turn switch. The only way to check is by getting to the wiring harness. There is a chance they will eventually quit working though Lyn.

Mar 03, 2011 | 2008 Chevrolet Malibu

2 Answers

Both of the rear turn signals stopped working at the same time, but everything else seems to work. Do you know what can cause this to happen? I changed one of the bulbs and it didn't work.


There is a turn signal flasher under dash...most have a flasher for the emergency signals and one for the turn signals...some have one flasher....but check fuses first...normally it is fuse burnt...if you can locate the flasher normally they will get abnormally warm when bad......it should look like a round or square silver shiney or black cube.........if these are good with ign.on hold turn signal lever down firmly ...if it works replace turn signal unit.....if none of this works you have to troubleshoot wiring...
...normally yellow wire is left turn and green wire is right turn...black or white is ground red is stop light....but normally it is a blown fuse or flasher.

Feb 19, 2011 | 2007 Ford Freestyle Limited

1 Answer

Turn signal sound stays clicking with no lights how do i fix


Try turning on the emergency flashers(they operate on a different flasher) if all your lights are flashing then all you need is a turn sig. flasher. Easy to find right near or on the fuse block. If none of the emergency lites flash you may have an open cicuit in the turn sig, switch.

Aug 06, 2009 | 2002 Pontiac Grand Am

1 Answer

1995 chevy silverado z71 no power to right tail light


check fuse.if good you got grounding problems or faulty turn signal switch.

May 09, 2009 | 1996 Chevrolet K1500

1 Answer

No brake lights of blinkers 1990 dodge dynasty


While not likely, it is possible that the light bulbs in both sides are have bad filaments. Turn on ignition key (but don't start engine). Then turn on parking lamps (first detent or "click" on headlamp switch). Walk around car and look for illumination on front parking lamps and rear tail lights. Turn on the right turn signal. Are those (right hand) lamps now changing brilliance? Try the left turn signal in the same manner. Are those (left hand) front and rear lights changing briiliance? Take note of any positions that did NOT change briliance when the turn signals were activated. If NONE changed briliance, you either have a bunch of bad bulbs (unlikely) or a bad flasher (more likely) or a bad turn signal switch (most likely) or perhaps wiring problems (possible if the car has been in a collision or has been "worked on" by some "non-expert" mechanic). Check the action of the emergency flasher control switch located on the steering column (facing up). Pushing it in (down) should result in the button going to two different heights alternately (low, high, low, high). You could just have bad flashers or corroded flasher contacts! Good luck!

Nov 15, 2008 | 1993 Dodge Dynasty

1 Answer

Low mount stop lights not working on 2003 Ford Focus SE 4 Door Sedan, the high mount works fine, the light bulbs are fine the fuse is fine the polarity seem to be reversed for the brake lights as the...


Some of these cars have a problem with the wiring harness. Part of the harness runs into the hatch/rear door, and the moving back and forth when opening and closing it causes the harness to get damaged. I have heard rumors of a recall, but I don't know if it is true or not.

Jul 30, 2008 | 2003 Ford Focus

Not finding what you are looking for?
2000 Ford Taurus Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...