Question about 2003 Chevrolet Impala

2 Answers

Cant find reservoir to fill power steering fluid, not where manual says...

WHERE IS THE RESERVOIR TO FILL FLUID CANT FIND ACCORDING TO MANUAL....WAS TOLD IT HAD A LEAK

Posted by on

  • Richard Scordino May 11, 2010

    If you can find the pump, follow the lines coming out of it. one goes to the reservoir.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The power steering reservoir is under the altnator and idler pully on the bottom near the fire wall...this is by far the stupidest place every to put such a thing!!!!

Posted on May 25, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Look at the drive belt and see if you see a pulley on a pump with a small cap you can remove that should be marked power steering fluid.
Some chevrolets have this reservoir on the firewall near the driver side by the master cylinder.
hope this helps. There are good sealers you can ad to stop minor leaks, Leakstoppers by Gold Eagle are great, at most retail auto parts chains.
martytasco

Posted on May 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Check power steering fluid in honda accord 1994


The power steering reservoir (I believe) is on the drivers side just behind the headlight. about mid-way down the side of the reservoir are a high and low mark. The reservoir should be just at or below the high mark when the vehicle is off. ONLY USE HONDA POWER STEERING FLUID. There are certain conditioners and additives in the Honda fluid that keep seals in the system in good condition. Using a generic/aftermarket fluid will cause the seals to shrink and the system will likely develop leaks.

Jan 05, 2014 | 1994 Honda Accord

2 Answers

What kind of power steering and brake fluids do I use on a 2006 town and country van?


You can use any fluid marked as power steering fluid. (not transmission fluid) Use dot3 brake fluid in brake systems. Don't use synthetics in brake systems unless system has been completely disassembled and cleaned.
For better service life, remove brake fluid from reservoir with a turkey baster once a year and refill with new fluid (no bleeding required) You can also drain power steering and re-fill every two years by removing return line to pump, allowing it to drain, then re-connecting and re-filling. Nothing lasts forever, but this helps it last a lot longer.

Aug 08, 2009 | 2006 Chrysler Town & Country

2 Answers

Where do i add power steering fluid


The power steering resover is under the alternator on these model cars your going to have look for it.

Feb 08, 2011 | 1995 Pontiac Bonneville

1 Answer

Where does the power steering fluid go in a 1991 chevy caprice classic


POWER STEERING FLUID GOES IN THE POWER STEERING PUMP RESERVOIR WHICH IS PART OF PUMP.POWER STEERING FLUID RESERVOIR SITS IN FRONT OF ENGINE LOOK FOR A RESERVOIR WITH A ROUND COVER THAT READ POWER STEERING FLUID ONLY.REMOVE COVER LOOK AT COVER DIP STICK POWER STEERING FLUID LEVEL SHOULD BE AT COLD MARK FOR COLD ENGINE HOT MARK ON DIP STICK WITH A HOT ENGINE.DONT OVER FILL.

Nov 06, 2010 | Chevrolet Caprice Classic Cars & Trucks

1 Answer

WeMy power steering fluid was leaking I tool it to the shop they told me It was the pump so I brought a new pump and got It put in and now I still cant turn my steering wheel


HEY DO THIS,YOU NEED TO BLEED SYSTEM. TO BLEED POWER STEERING SYSTEM.TO DO THIS.FILL THE POWER STEERING RESERVOIR TO COLD FULL MARK ON DIP STICK.WAIT A FEW MINITES,FLUID LEVEL DROP ADD MORE FLUID UNTIL REACH COLD MARK ON THE DIP STICK..WAIT FEW MINUTES.START ENGINE LET IT RUN FOR 2 OR 3 SECONDS.TURN OFF ENGINE CHECK POWER STEERING FLUID ADD MORE FLUID.DO THIS UNTIL FLUID LEVEL STOP DROPPING.WHEN FLUID LEVEL STOP DROPPING.SAFELY RAISE FRONT OF THE VECHICLE UNTIL FRONT WHEELS DONT TOUCH THE GROUND.START ENGINE UP.TURN THE STEERING WHEEL GENTLY FROM STOP TO STOP,CHECK THE RESERVOIR FLUID LEVEL LOOKS GOOD TURN OFF ENGINE LOWER VECHICLE .LOWER VECHICLE TO GROUND. LET VECHICLE SET FOR 2 MINUTES CHECK POWER STEERING FLUID LEVEL.IF STILL LOW ADD LITTLE MORE.TO THE COLD FULL MARK ON DIP STICK. DONT OVER FILL BECAUSE FLUID LEVEL RISES WHEN IT GET HOT.WHEN DONE IF STEERING WHEEL STILL FEEL HARD TO TURN YOU SEE AIR BUBBLES IN FLUID THATS WHEN FLUID HAS A TAN LOOKING COLOR WAIT 5 MINUTES AND.REPEAT THE BLEEDING PROCESS. DONT DRIVE OR OPERATE VECHICLE ON HIGHWAY UNTIL POWER STEERING HAS NORMAL OPERATION.

Sep 26, 2010 | 1999 Oldsmobile Alero

1 Answer

How frequent should I change my power steering fluid? I have a 2004 Honda Accord LX with 70524 miles.


You should never have to replace the power steering fluid in your vehicle. But if you still want to, the best way is to use a turkey baster and pull as much fluid out of the reservoir and into a suitable container, then refill the power steering reservoir.

Jun 15, 2010 | 2004 Honda Accord

1 Answer

Power steering fluid foams up in reservoir, and


you need to replace power steering box the wheel inside is bad

May 25, 2010 | 1991 Honda Accord

2 Answers

Peplaced power steering pump and it still makes


Check that the filter at the bottom of the reservoir isn't blocked and restricting fluid to the power steering pump.

Mar 03, 2009 | 1992 Honda Accord

1 Answer

Inatallation 92 honda accord power steering pump


Hey, here's the procedure, disable air bag, if equipped w/ one, disconnect the pump return hose from the reservoir and place the end in a large container. Plug the port in the reservoir. Start the engine and turn the steering wheel lock to lock several times, until fluid stops running from the hose. Turn off engine immediately. Re-attach hose. Disconnect the inlet and outlet hoses at the pump. Remove the drive belt. Remove the mounting bolts/nuts and remove pump.
Install in reverse order. Adjust belt tension,fill ps reservoir and bleed any air from the system (to bleed air from system, fill reservoir, start engine and allow to idle, turn wheel from side to side all the way several times. Shut off, fill if necessary.
. Tighten bolts to : Thru bolt 30 ft lbs., mounting nut 16 ft lbs.

Dec 26, 2008 | 1992 Honda Accord

Not finding what you are looking for?
2003 Chevrolet Impala Logo

2,274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...