Question about 2006 Toyota Camry

1 Answer

06 Camry, new breaks/rotars now sounds like metal and grinding.

Just spent $630.00 for new breaks and rotars for an 06 Camry. Now here noises worse than before. Metal griding, squeeking. When I pull slowly off my drive way, it has a loud grinding sound like I have no breaks at all.

Posted by on

  • Dave  C
    Dave C May 11, 2010

    Take it back right away and let them have a chance to fix it.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 6,982 Answers

First, if the brakes are stopping the car OK. Check that the metal shields behind the rotors are not touching the rotors...that can make terrible noise though it's not serious and is easily corrected by bending. If that is not the problem, bring it back to whoever did the work immediately!!!
I'd much rather see a car not starting than one that can't stop...Obviously dangerous and important not to delay having looked at!

Posted on May 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's causing my 2001 hyundai accent to be noisy when moving on the driver side front wheel?


It could be the disc brake pads telling you they need to be replaced.

Jan 19, 2016 | 2001 Hyundai Accent

2 Answers

I have a honda c-rv 97 and it produces grinding sound on the rear left wheel. When I jacked the wheel and tried to remove it, rhe rim got stucket with the wheel drum so I used a piece of timber to hit the...


Most likely your rear brake shoes are worn down far beyond the min limits and you now have metal to metal contact, which causes the grinding noise, overheating and poor braking. You most likely will need to replace the drums. The other rear wheel will probably be the same.

Feb 05, 2015 | Honda Cars & Trucks

1 Answer

My toyota corolla2005 rear right side wheel scrubing th tire when breaks


I would first check the break parts on that tire. remove the tire...making sure you take the precaution to chock the other tires and use an appropriate jack and proceed to removing the tire. Once the tire is down look at the the components for wear. Some break pads come equipped with a metal blade that once the pad wears out this metal plate comes in contact with the rotar or drum and makes a high pitch metal grind sound. This would be the indicator to change your pads and may possibly need to resurface your rotars or drums to spec. Let me know if that's what it was. GE.

Nov 07, 2013 | 2005 Toyota Corolla CE

1 Answer

I have a 2002 Toy Camry and today while driving I went to make a left turn. I heard a deep "thud" sound that came the front right-side wheel area and a strange grinding noise that followed also...


check for failed wheel bearings or loose wheel on studs. Check suspension ball joints and steering joints the problem is serious so have the front inspected by a competent mechanic

Jul 15, 2013 | Cars & Trucks

2 Answers

Grinding and rubbin when breaking, seems to be getting worse. Only happens when breaking.


Get your brake pads replaced. Sounds like the brake linings have worn down to nothing, and you are now metal to metal on your brakes.

Sep 05, 2011 | 2000 GMC Jimmy

1 Answer

Break Noise


check the dust shield mounted behind the rotor,see if theres any signs of contact if so use a pry bar and slitly pry it away from rotor,what type of pads do you use none metalic or semimetalic? some semimetalic will
give you this problem as they are brakiging in

Jul 02, 2009 | 2002 Jaguar X-Type

4 Answers

04 cavalier makes grinding noise in front end turn the wheel to the right grinding gets worse turn the wheel to the left grinding stops. it sounds worse at 40mph and above. what would cause this?


3 things to check:
Worn disc brake pads, grinding against the rotor.
Wheel bearing
cv joint.
You posted grinding gets worse turning to the right, the problem is the driver side wheel, but it would be best to have both wheeles checked.

Jun 19, 2009 | 2004 Chevrolet Cavalier

1 Answer

2003 BMW 325i, Metal-on-metal grinding left turn only


This sounds like a wheel bering. If you turn left on a bad passengerside bering it growls louder because more pressure is shifted onto it.

Mar 22, 2009 | 2003 BMW 325

2 Answers

Grinding sound when step on break


Sounds like your brake pads/shoes need replaced. When the brake linings wear out, you have metal to metal when you step on your brake pedal. You may have to replace rotors/drums due to severe scarring.

Jul 12, 2008 | 2003 Ford Escape

Not finding what you are looking for?
2006 Toyota Camry Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...