Question about 2006 Chevrolet Equinox

1 Answer

"06 chevy equinox how to reset security system. engine light on abs light on and break light on the radio clock turns to 12:00 everytime when turning the key

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 95 Answers

Take + terminal off the battery and leave it sit for 2-3 mins. This act's like a reset-to default factory settings...I had same problem on my 97 Z28, endeded up being the negative terminal to the battery was just slighly loose. I noticed it while disconnecting the the battery to reset my ob-cpu...Try this and let me know if it worked... i should!

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I stop my car showing ABS, POWER STEERING and BREAKING SYSTEM lights and beeping.?


-First able check all the belts. If any loose. (I mean not tight or good tension).
-If all tensions are good then turn on the car, let it run for 10-15 minutes and check the voltage at the battery. If it's below 13 volts
then the problem is the alternator.

Good Luck

Mai

Apr 24, 2014 | 2006 Volkswagen Polo 1.9

2 Answers

I have a 2005 Equinox. The abs and tc light are on. Also there is an occaisional sound and vibration when I press on the brakes going at a slow rate of speed. The local Chevy dealer test drove the...


Have a competent mechanic scan the codes in the ABS control. A common fail point of the 2005 Equinox is the wire harness jumper for the drivers front wheel sensor. This is a foot and a half long jumper that connects the wheel sensor to the engine compartment wire harness. It is rigidly held in place by a couple of plastic stays that create a pinch flex point just beneath the lower stay where wheel turn moves the wire against this rigid point. After about 60-80k miles, the wire begins to break down in the insulator and false wheel speed readings are read as false wheel slip indications while the ABS system tries to modulate brake pressure. This modlation creates the grinding feel. After an amount of time, the ABS computer "recognizes" this as a fault and shuts ABS and traction control off since both systems use the wheel spin input, and the dash lights light.
Although this is a pretty pricey part at a dealer, a genuine Delco replacement part can be found online often at a much more reasonable price.

Nov 01, 2011 | 2005 Chevrolet Equinox

1 Answer

Chevy equinox has abs engine symbol on


check if ABS system is connected properly even if one of the the gauges is disconnetcted then you'll have ABS light ON

Jan 29, 2010 | 2006 Chevrolet Equinox

2 Answers

How do i reset my oil light? my husband changed


TURN THE IGNITION KEY TO RUN WITH THE ENGINE OFF.FULLY PRESS AND RELEASE THE ACCELERATOR PEDAL THREE TIMES WITH IN FIVE SECONDS.YOU HAVE TO DO THIS MORE THAN ONE TIME.ITS NOT GOING TO RESET FIRST TRY BUT DO THIS PROCEDURE.UNTIL THE CHANGE ENGINE OIL LIGHT WILL FLASH WHILE THE SYSTEM IS RESETTING.TURN THE KEY TO OFF.WAIT A FEW SECONDS.START CAR UP TO SEE IF CHANGE OIL LIGHT COME BACK ON.IF YES YOU HAVE TO TRY THE RESET PROCEDURE AGAIN.

Sep 26, 2009 | 2006 Chevrolet Equinox

2 Answers

Tires


When both of these lights are on you should suspect a wheel sensor. Check the sensor at each wheel (look for small 2-wire plug). Make sure each one is securely plugged in and no wires are broken or bare. Also make sure no sensor has been damaged. Dealt with same issue with one yesterday and it had a sensor left unplugged after wheel service.

Jun 26, 2009 | 2005 Chevrolet Equinox

2 Answers

Won't start just clicks battery is charge


Start with the small stuff. Check the battery ends,look for corrosion,check battery voltage.

May 22, 2009 | 2006 Chevrolet Equinox

2 Answers

How do I reset the change oil soon light?


Hi to reset the oil life monitor
turn the key on engine off
push the gas pedal to the floor 3 TIMES WITH IN 5 SECONDS
the light will flash then go out

May 12, 2009 | 2005 Chevrolet Equinox

2 Answers

2006 Chevy Equinox - Service Lamp Reset


Turn the ignition to run. Within three seconds push the gas pedal to the floor three times. Turn the key to off, and then start the car. The light should flash three times signifying that it reset. If it does not, try repeating the process, but instead of turning it to off after stepping on the pedal, just start the car.

Nov 02, 2008 | 2006 Chevrolet Equinox

Not finding what you are looking for?
Cars & Trucks Logo

1,519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...