Question about 1996 GMC Sierra
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
My 2003 Sierra's blower came on by itself in the garage while I was sleeping and ran the battery completely down. I had to replace the blower switch located under the glove box next to the blower at the bottom of the right corner of the dash. The switch is in front of the blower and held in by two screws. Disconnect the two wire connections. This is a "dealer only" part and cost me 65.00. Also check the wire harness with seven wires connected to it for melted plastic. It will be marked "ABCDEFG". If it has melted, you'll need to replace it. Pay attention when reinstalling either part, that the wires "ABCDEFG" match the switch in that order.
Posted on Jan 17, 2009
Check coolant level. Check for heat at the heater hose going from water pump to heater core at firewall. Check to see that cable is moving coolant control valve from the closed to open position. Low mileage so it shouldn't be plugged heater core.
Posted on Jan 07, 2010
Testimonial: "You were absolutely correct. Low coolant level. Put in some 50/50 and we're nice and toasty now, but need to find out why coolant was so low. Thanks."
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
The brake light switch is at fault. Get a new one and replace it. The location is at the brake pedal area mounted on a bracket with a plunger stud that rest on the brake pedal's arm the pad is attached to
Posted on May 08, 2010
Tips for a great answer:
Sep 27, 2015 | 1996 GMC Sierra
Feb 11, 2015 | 2004 GMC Sierra
Jan 03, 2014 | 1996 GMC Sierra
Nov 15, 2010 | 1996 GMC Sierra
Feb 18, 2010 | 1996 GMC Yukon
Oct 10, 2009 | 1996 GMC Sierra
Oct 02, 2009 | 2001 GMC Sierra Crew Cab
Apr 17, 2009 | 2004 GMC Sierra
Nov 02, 2015 | 1996 GMC Sierra
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: