Question about Chrysler PT Cruiser

Open Question

Location fan cooling sensor - PT Cruiser Chrysler Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: cooling fan switch/or sensor

The Coolant temp Sensor is located right under the top radiator hose (on the engine side), with a little black connector!, You might have to remove th etop hose to get to it with a deep socket and extension!.
Also Dont Forget to blled the coolant system by the bleeder valve uptop right near/above the coolant sensor!.(10MM Mini socket w/ extension IIRC!)

Posted on Sep 28, 2009

Ajkill
  • 2035 Answers

SOURCE: rx8 fan cooling sensor location?

Please use this link:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801a429a



Good luck......

Posted on Jul 14, 2008

  • 1 Answer

SOURCE: Replace Cooling Fan sensor unit

Located behind passenger headlight. Must cut small acess hole in plastic to acess.(directly behind where headlight mounts) Plastic cuts easily. Remove just enough to install new unit. It is blue and black in color with a plug in the bottom. Remove 2 mounting screws,Slide red connector lock back,and squeeze rear of connector to release.

Posted on Jun 03, 2009

  • 91 Answers

SOURCE: cooling fans sensor

On 3.5l, screwed into the rear of the rear cylinder head.

Posted on Apr 06, 2010

  • 1207 Answers

SOURCE: Location of cooling fan sensor 1993 Chevy lumina

it seems to be on the bottom left front of front of the intake right below the thermostat. Good luck for you!
______________________
auto key programmer x-100

Posted on Sep 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cooling fan sensor/switch located on this unidentified vehicle?


You are not giving a year,make, or model of vehicle, but as a general rule the coolant temp sensor (which many cars use for the fan) and/or the fan sensor are usually located near the water outlet for the upper radiator hose. This is also the location of the thermostat on most vehicles. Hope that helps.

Aug 26, 2015 | Cars & Trucks

1 Answer

The location of a 2002 chevy cavalier cooling fan sensor


The cooling fan is controlled by the PCM - powertrain control module through a relay ! There is no cooling fan sensor , there is a coolant temperature sensor ! This coolant temperature sensor is an input to the engine computer , if there were a problem wit the sensor the check engine light would be on .
Cooling Fan Control
The engine cooling fan system consists of one cooling fan and one relay. The relay is powered by the battery positive voltage circuit and controlled by a switched ground from the powertrain control module (PCM).
During operation, the PCM supplies the ground path for the cooling fan relay through the cooling fan relay control circuit. This energizes the cooling fan relay coil, closes the relay contacts, and supplies battery positive voltage from the cooling fan fuse through the cooling fan motor supply voltage circuit to the cooling fan. The cooling fan motor is grounded through its own ground circuit.
The PCM commands the fan on under the following conditions:
?€¢
Engine coolant temperature exceeds approximately 106?°C (223?°F).


?€¢
A/C refrigerant pressure exceeds 1310 kPa (190 psi).


?€¢
A/C is requested and vehicle speed is below 100 km/h (62 mph) with A/C pressure above 1413 kPa (205 psi).


?€¢
Vehicle speed is less than 8 km/h (5 mph) for more than 750 seconds. The fan will turn off when vehicle speed is greater than 8 km/h (5 mph) for more than 20 seconds.

Jun 12, 2015 | 2002 Chevrolet Cavalier

3 Answers

My radiator fan stays on its not the relay,could it be the sensor? where is it located if it is the sensor? thanks laurie


Could very well be the sensor (thermostat). No idea where yours is located, but parts store location chart may help, or you could buy a shop manual.

May 23, 2015 | 2003 Mercury Grand Marquis

2 Answers

My cooling fan will not turn on. What could this be? I had someone tell me the water pump, but it does not leak.


Step 1:

This cooling fan circuit has 2 cooling fans and 2 cooling fan relays, both cooling fan relays are located in the BJB (battery junction box, underhood fuse box) there is a low speed or main cooling fan relay in cavity location # K-46 and the high speed relay is location # K-47! Also check the main cooling fan power fuse # 2 in the same BJB, The fuse is a MAXI-FUSE (large one) it is blue in color and is rated at 60amps!

Step 2:

Also check the coolent tempature sensor thats what signals the fan to turn on.

Step 3:

Do the fans turn on when you turn the a/c on. if not may have bad fan motor

Feb 27, 2013 | 1998 Ford Contour

1 Answer

Cooling fan not kicking on


Three thing you need to be concerned when the cooling fan fails to turn on, the fan, the fan relay, the coolant temp sensor, First the relay,go to the engine junction fuse and relay box there listed next to thethe ABS relay heater blower relay is the cooling fan relay, Now make a tool from the cooling fan relay,take the cover apart and expose the relay,when you collapse this relay the fan turns on stick in back in the socket key on engine off collapse the relay the fan should turn on if the fan doesnt turn on a fan is the solution if the fan turns on the coolant temp sensor will be the solution this sensor is located at the thermostat housing just follow the top radiator hose,you will see a sensor there

Mar 27, 2012 | 1997 Chevrolet Cavalier

2 Answers

I have a 1999 chevy cavalier and the cooling fan will not start


CHECK COOLING FAN FUSE AND RELAY.IF BOTH GOOD SCAN CAR TO CHECK COOLANT TEMPERATURE SENSOR FAULT CODE.THE PCM AND COOLANT TEMP. SENSOR IS WHAT CAUSE FAN TO RUN AT CERTAIN TEMPERATURE.IF ALL IS GOOD.HOT WIRE COOLING FAN USING JUMPER WIRES TO BATTERY.IF FAN DONT RUN REPLACE FAN MOTOR.IF FAN RUNS YOU HAVE SHORT OR BROKE WIRE IN THE COOLING FAN ELECTRICAL CONNECTOR.

May 06, 2010 | 1999 Chevrolet Cavalier

2 Answers

Cooling fan switch/or sensor


The Coolant temp Sensor is located right under the top radiator hose (on the engine side), with a little black connector!, You might have to remove th etop hose to get to it with a deep socket and extension!.
Also Dont Forget to blled the coolant system by the bleeder valve uptop right near/above the coolant sensor!.(10MM Mini socket w/ extension IIRC!)

Jun 03, 2009 | 2002 Chrysler 300M

1 Answer

Cooling fan wont work


The water temp sensor is located near the thermostat housing. This sensor is what tells the ECM to turn the fan on/off. The water temp sending unit is located near the same area. You know you have the correct sensor is because the water temp sensor has a 2 prong plug. The water temp sending unit only has 1 prong.

Sep 26, 2008 | 1998 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...