Question about 1989 Ford Ranger

Open Question

Replace turn signal bulb in dash cluster - 1989 Ford Ranger

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10865 Answers

SOURCE: Brake light, reverse light and turn signal issues

Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Posted on Jan 28, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I fix the interior turn signal lights?


remove cluster,
remove lamps
replace with new
done.
ask any mechanic in town, its not something , super hard.

Nov 11, 2015 | 1990 Jeep Wrangler

1 Answer

1991 honda civic turn signal problem


I can't recall as its been a while since I've worked on the older Civics, but there may be 2 bulbs in the cluster. They are not that hard to pop out and have a look.

Jun 17, 2013 | 1991 Honda Civic

1 Answer

Dash turn signal light does not work right one.


Remove the gauge cluster and replace the small light bulb that is behind the turn signal.

Jun 19, 2012 | 1998 Ford Windstar

1 Answer

Instrument cluster and tail lights went out. checked all fuses, replaced bulbs. what naxt


replace them and get new led lights for ur car buddy ..
i also bought from www.wholesaleledlghts.co.uk they are COOL ..:)

Dec 11, 2011 | 1994 Buick Roadmaster

1 Answer

Hello i took off my cluster on my 02 sebring and i have everything apart i want to know which bulb do i replace for my dash lights to work


If you have it all apart, I would replace all of them so you don't have to take it all apart again! Bulbs fail close to each other.

But not the error warning signal lights.

Generally the dashboard lights for the instrument cluster are directly above and below the cluster.

Aug 28, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

How do I remove dash enough to change bulbs in 2000 ford ranger?


First locate the screws hidden above the instrument cluster . If the truck has a tilt wheel shift it downward and put the vehicle in neutral if it has an automatic trans. The outer instrument cluster bezel will then bel loose at the top. Under the lower edge of the dash there are several hex head screws holding the plastic moldings in place. Remove all of them including the two holding the brake release handle. The dash face should then pull off. There are 4 hex head screws holding the cluster into the inner dash structure. Remove those and carefully pull the cluster out and turn it toward the left side. Reach behind the cluster and unplug the connectors. The bulbs are in removable black sockets which you will turn about 1/4 turn to remove. Remove and replace the bad bulbs and reverse the above process to reassemble.

Jan 31, 2011 | Ford Ranger Cars & Trucks

1 Answer

Trying to replce dash lights on speedomoter on a


Hi there,

Well you can please follow the below steps -
1. Remove the two screws on the underside of the dash cowl.
2. Pull off the trim bezel that surrounds the gauge cluster and dash assembly by pulling it forward with your hands.
3. Remove the four screws that hold the gauge cluster in place.
4. Slide the gauge cluster forward, and remove the electrical plugs from the back of the cluster.
5. Replace the bulbs that are blown. Turn each bulb counterclockwise to unlock it from the dash cluster assembly, then pull the bulb straight out of the housing. Insert the new bulb, align the tabs on the bulb with the notches in the back of the cluster and turn it clockwise to lock it into the housing.
6. Reassemble the dash. Assembly is the reverse of disassembly. Post comments for more help or information........

Good Luck!!

Mar 27, 2010 | 2000 Dodge Intrepid

3 Answers

My check engine light DOES NOT come on when i turn my key foward like the other lights! its 01 blazer, 4.3 .....where is the light located, i think the bulb is burnt out! I have bad hesitation when i stomp...


The light is located next to the gate adjar light in the upper left area of the cluster. It at the 2500 rpm mark on the tachometer.
I would take the vehicle to your local Auto Zone and ask them to scan your car for trouble codes. The will scan the car for you at no charge. Write the codes down and respond back.
Regards,

Aug 19, 2009 | 2001 Chevrolet Blazer

1 Answer

Turns signals went out in dash and car


The bulbs for the lights may have blown. The instrument cluster will need to be removed to replace them. You can buy a Haynes or Chilton manual from your local parts store. Either will have the procedure to remove the cluster.

Jul 09, 2009 | 1995 Buick Roadmaster

1 Answer

Dash lighting and tail light.


the bulb in the dash went out you need to remove cluster panel near where the light went out

Jun 02, 2009 | 2000 Mitsubishi Montero

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...