Question about 2011 Hyundai Sonata

Open Question

Oxygen p0037 sensor voltage

P0031 AND P0037 CODE STAYING ON AFTER REPLACING SENSORS

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 306 Answers

SOURCE: oxygen sensor heater control circuit, low voltage

yes and also may make it run rough or lack power. the o2 sensors tell the computer how to make the engine run

Posted on Feb 13, 2010

Testimonial: "u said it would make it hard to start and the other tech said he doesnt think so"

Ad
timnick4753
  • 349 Answers

SOURCE: code P0037 on Santa Fe refers to bank 1 sensor 2 oxygen sensor. Where is it located?

Bank one is the first oxygen sensor in line from the engine back. Bank 2 is the second in line.

Posted on Apr 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0031 p0037 need see a video how to fix


P0037 HO2S Heater Control Circuit Low B1S2

https://www.obd-codes.com/p0031 Check for a fuse bing blown , Heater circuit shorted in O2 sensor blowing the fuse , maybe . You don't say what make , model an year vehicle an engine size .

Mar 28, 2017 | Cars & Trucks

1 Answer

I have a 06 Corolla that is giving a P0037 code I have replaced the Oxygen sensor closest to the Catalytic converter Twice


it should be the o2 after cat converter ----and the following information courtesy of OBDP0037 HO2S Heater Control Circuit Low B1S2 OBD-II Trouble Code Technical Description Article by Dale Dale Toalston ASE Certified Technician Generic: HO2S Heater Control Circuit Low (Bank 1 Sensor 2) Nissan: Heated oxygen sensor (HO2S) 2 Bank 1 - heater voltage low What does that mean? Heated Oxygen sensors (HO2S) are inputs used by the PCM (Powertrain Control Module) to determine oxygen content in the exhaust system. Bank 1, sensor 2 refers to the second sensor back on bank 1. The PCM uses the information gained from the Bank 1,2 HO2S mainly to monitor the efficiency of the catalytic converter. Integral to this sensor is a heater element The PCM controls this heater to warm up the sensor to operating temperature. This allows the engine to enter closed loop faster and reduces emissions on cold startup. The PCM continuously monitors the heater circuits for abnormal voltages or in some cases, even amperages. Depending on the make of vehicle, the Oxygen sensor heater is controlled one of two ways. One way is that the PCM directly controls the voltage feed to the heater either directly or via a HO2S relay and a ground is supplied from the vehicle's common ground. The other way would be a fused 12 volt Battery feed (B+) that feeds 12 volts to the heater element anytime the ignition is on and the control of the heater is done by a driver in the PCM which controls the ground side of the heater circuit. Finding out which one you have is important because the PCM activates the heater under various circumstances. If the PCM detects an abnormally low voltage condition on the heater circuit, P0037 may set. Symptoms Symptoms of a P0037 DTC may include: Malfunction indicator lamp (MIL) illumination There will likely be no other symptoms Causes Potential causes of a P0037 trouble code may include: Bank 1,2 oxygen sensor heater element has failed Physical damage to heated oxygen sensor has occurred Control circuit (or voltage feed, depending on system) is shorted to ground PCM Oxygen sensor heater driver has failed === Possible Solutions== Do a visual inspection of the Bank 1,2 HO2S and wiring harness. If there is any damage to the sensor or any damage to the wiring, repair/replace as needed. Make sure wiring is routed away from exhaust. If all appears okay, unplug the Bank 1,2 HO2S and verify that there is 12 volts B+ present with the key on engine off, (or ground is present, depending on the system). Verify the heater control (ground) circuit is intact. If so, remove the o2 sensor and inspect for damage. If you have access to resistance specifications you can use a Ohmmeter to perform a resistance test of the heater element. Infinite resistance indicates an open in the heater. Replace the o2 sensor as necessary.

Read more at: http://www.obd-codes.com/p0037
Copyright © OBD-Codes.com-CODES.com

Jul 28, 2015 | 2006 Toyota Corolla

1 Answer

Codes p0031


I am getting two codes on my 2004 Volvo S-40 I. P0031 and P0037.
I have also changed both oxygen sensors with OME sensors. What do I look for next

Jan 07, 2014 | Cars & Trucks

1 Answer

All 4 O2 sensors failed at same time


No that is not possible. You either have lost power or ground to sensors or the system has a fuel control issue.

Nov 04, 2013 | 2004 Nissan Pathfinder

2 Answers

All 4 O2 Sensors failed at the same time


Check the relays and fuses for the H.E.G.O (heated oxygen sensors) for power and function.

Nov 04, 2013 | 2004 Nissan Pathfinder

1 Answer

P0037 code subaru outback I have replaced the cat and both o2 sensors and the same code comes up


I'm sorry you spent that money if this was the original code.

The code means one of the O2 sensors has a faulty heater or the power circuit for the heater is bad. The sensor is not heating up as fast as it should. Since you have replaced the sensor you would need to check the power circuit for the heater.

P0037 SUBARU Description Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).

In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.

The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
Read more: http://engine-codes.com/p0037_subaru.html#ixzz26TjIZyLw

Sep 14, 2012 | 2000 Subaru Outback

2 Answers

P0037. heater sen. where is it on the engine?


The code is for the heater in the O2 sensor bank one sensor two. That would be the sensor after the catalytic converter on bank one.
It could be the sensor itself or the power supply for the heater.

Aug 25, 2012 | 2006 Mazda MPV

2 Answers

The engine light and VSC light are on (Vehicle Singapore 2004 Lexus RX 300. Diagnostics report Error code P0037


your o2 sensor is bad. vsc will go on for any small DTC displayed on the MIL (cel)

P0037 LEXUS P0037 LEXUS - Oxygen Sensor Heater Control Circuit Low Bank 1 Sensor 2 Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
Possible causes - Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Faulty Engine Control Module (ECM) When is the code detected? The P0037 is set when the ECM detects an excessively low voltage through the heated oxygen sensor heater circuit P0037 LEXUS Description Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).

In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECMcontrols the heater element circuit by allowing current flow to ground.

The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.

o2_heater_circuit.gif

Mar 14, 2011 | 2004 Lexus RX 330

1 Answer

2005 toyota tacoma 2.7 code p0037 replace rear 02 and computer code keep coming back.


P0037 - O2 Oxygen Sensor Circuit High Voltage (Bank1, Sensor2)

The Heated Oxygen Sensor (2) located rear of catalytic converter produces an output signal relative to oxygen storage capacity of catalytic converter. Ho2S 2 signal is less active than signal produced by front oxygen sensor. This code sets when HO2 Sensor voltage is greater than 999 mV for more than 2 minutes (time depends on model. Could be as high as 4 minutes)

Symptoms: There may be no noticeable symptoms except for MIL illumination. Possible high fuel pressure can over rich the system.

Causes: A code P0138 may mean that one or more of the following has happened:
* Faulty O2 sensor
* Short to battery voltage in O2 sensor signal circuit
* High fuel pressure (not as likely)


Here are some potential solutions:
* Replace O2 sensor
* Repair short to battery voltage in o2 sensor signal circuit

If you replaced the O2 sensor, then its possible that you have some electrical problem there; reset the codes first, and if this come on again, check in this link TSB P0037 electrical diagnostic procedure.

Keep us updated.

Jan 27, 2011 | 2005 Toyota Tacoma

1 Answer

My check engine light has come on in my 2006 Pontiac G6 after 2 and a half years. What could possibly be wrong since I keep my car serviced and the guys had just told me that my car was in tip top shape?


P0016 - Crankshaft Position Camshaft Position Correlation Bank 1 Sensor A
P0030 - Heated Oxygen Sensor (H02S) Heater Control Circuit Bank 1 Sensor 1
P0031 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 1 Sensor 1
P0032 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 1
P0036 - Heated Oxygen Sensor (HO2S) Heater Control Circuit Bank 1 Sensor 2
P0037 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 1 Sensor 2
P0038 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 2
P0050 - Heated Oxygen Sensor (HO2S) Heater Circuit Bank 2 Sensor 1
P0051 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 2 Sensor 1
P0052 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 2 Sensor 1
P0053 - HO2S Heater Resistance Bank 1 Sensor 1 (PCM)
P0054 - HO2S Heater Resistance Bank 1 Sensor 2 (PCM)
P0056 - Heated Oxygen Sensor (HO2S) Heater Circuit Bank 2 Sensor 2
P0057 - Heated Oxygen Sensor (HO2S) Heater Circuit Low Voltage Bank 2 Sensor 2
P0058 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 2 Sensor 2
P0068 - Throttle Body Airflow Performance (PCM)
P0100 - MAF Sensor Circuit Insufficient Activity

Jun 25, 2009 | 2006 Pontiac G6

Not finding what you are looking for?
2011 Hyundai Sonata Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...