Question about 2011 Ford Fiesta
Blower on heater not working
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
under hood fuse box next to bake master cylinder resovior, fuse #
36 40A** Blower motor
Try this link for a fuse box diagram
Posted on Jan 13, 2009
Ok, first off, check the fuses under the dash. If they're all good, does the blower work only on high speed? If yes, then you have a bad blower motor resistor, which is located under the hood, near the blower motor itself. If the motor doesnt work at all at any fan speed, make sure the wiring harness that plugs into the motor under the hood is clean and tightly installed. If it still doesnt operate, sometimes tapping on the blower motor housing will kick it on, but if that doesnt work, you may have to replace the blower motor. They are available aftermarket, and arent usually too expensive.
Posted on May 24, 2009
There is a fuse box inside the car to the left of the steering column. fuse 228 10 amp and fuse 208 40 amp. Check power to the blower motor connector. Check for water in blower. I have seen water get into blower motor and short out. Good luck I hope this helps.
Posted on Jul 30, 2009
have exact same problem myself checked all fuses they are fine & my car is a ford fiesta yr 2000 model Ghia gonna have a look at the 50amp fuses
Any1 else out there have a possible solution. If this 1 dont work
Posted on Dec 29, 2009
Tips for a great answer:
Mar 14, 2015 | 2011 Ford Fiesta
Jun 29, 2014 | 2011 Ford Fiesta
Feb 18, 2014 | Cars & Trucks
Apr 22, 2012 | 2011 Ford Fiesta
Feb 14, 2012 | 1996 Ford Fiesta
May 25, 2010 | 2000 Ford Focus
Oct 26, 2009 | 2000 Ford Focus
66 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: