Question about Cars & Trucks

Open Question

Peugeot 207 wont start

I parked car on xmas eve and left standing for 5 days. car will not now start. battery is turning over but won't kick in. have tried jump start but no good

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

CivicSI990
  • 41 Answers

SOURCE: car want start factor security light flashing and

The factory security light will remain on - this is a standard feature indicating the car is dead.
First, unplug the hazard fuze in the engine bay (this will reset the ecu and remove the flashing)

Next, replace the battery with a new one (or one with proper charge) - keep in mind a small battery will not do anything for these cars, the engines require a lot to push them over (it isnt a honda)
*Make sure to clean the positive and negative battery cables from acid

Then just start it up :)

Posted on Apr 06, 2009

csmock132
  • 4669 Answers

SOURCE: 2004 Jeep wont start , hear

Sounds like a bad starter.

Posted on Apr 12, 2009

  • 9 Answers

SOURCE: Wont start...not the battery. Tried to jump it.

There are a few thing that could cause this. It prob. is not your alt. you would still be able to jumpstart it. I would suggest having your starter checked first. You can have it tested at most auto parts stores for free. It will save you some $$$ if that is not the problem. hope this helps

Posted on May 10, 2009

ministock48
  • 258 Answers

SOURCE: Dead battery, replaced and car still wont start, alternater good

check all your connections at battery and make sure they are clean and tight

Posted on Oct 22, 2009

  • 2841 Answers

SOURCE: Odyssey battery problem?

You need to remove the battery cables and clean the connections with a wire battery terminal cleaning tool. Then start the car and check the voltage at the battery with a multimeter. It should be between 13.5-16 volts. Any less and the alternator is defective. If this all checks out and you are 100% sure nothing is on drawing power then the battery more than likely has a dead cell. Remove the battery and take it to your parts store and have it tested. You will probably need a new battery.

Posted on Apr 19, 2010

Testimonial: "Very helpful response - thanks so much!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a second key for my peugeot 207 57 plate i need to activate the key but not sure if i can activate it myself


On all the cars I have done, you insert the master key and turn the ignition on for 30 seconds, turn it off and insert the other key within 5 seconds and turn it on for another 30 seconds. Turn it off. then try to start the car with the new key. I haven't done a peugeot, though..

Oct 26, 2014 | Peugeot 207 Cars & Trucks

1 Answer

Which fuse for Warning buzzer on 2006 Peugeot 207


Go and check the rear left and right tail lights. take off connector and you'll notice that earth wire and pin is blown.

Jan 25, 2014 | 2006 Peugeot 207 1.6

1 Answer

Peugeot 307 hdi 110. lights left on battery died, put a new battery in. car keeps turning but won't start. immobliser light stays on


the car is imobalised, try disconectint the earth from battery for 5 mins and reconect, car should start

Dec 12, 2012 | Cars & Trucks

1 Answer

No compression on peugeot 207 1.6


Mark the position on your distributor first Loose by 1or2 turns distributor unit bolts 2 or 3 of the mount of distributor and rotate left or right . Let somebody start the engine for 5 min and than rotate distributor half millimetre and you rev the engine and you feel quick rev up .For low compression is better to give compression test .

Sep 21, 2012 | Peugeot 207 Cars & Trucks

2 Answers

Windscreen washer wont work in my 207 (56 plate)


I HAVE A 2007 207.THE FUSE BOX IS LOCATED ON THE RHS OF THE ENGINE COMPARTMENT.FUSE NO 3 10AMP.I REPLACED FUSE ON MINE AND WORKED FOR A COUPLE OF DAYS AND PACKED IN AGAIN.AM HAVING IT DONE TOMORROW UNDER WARRANTEE 13/1/09.THIS APPEARS TO BE A COMMON PROBLEM

Jan 04, 2009 | 2006 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...